SCH-i730 Series

PORTABLE Dual - Band TELEPHONE

User Guide

Please read this manual before operating your phone, and keep it for future reference.

Samsung

Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the "Phone
System"), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.

Samsung Telecommunications America, Inc.

Headquarters: 
1301 E. Lookout Drive 
Richardson, TX 75082 
Tel: 972.761.7000 
Fax: 972.761.7001 

Customer Care Center:
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.801.6065

Internet Address: http://www.samsungusa.com

© 2005 Samsung Telecommunications America, Inc. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.

Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.

Openwave ® is a registered Trademark of Openwave, Inc.

RSA ® is a registered Trademark RSA Security, Inc.

WOW technology is incorporated under license from SRS labs, Inc.

WOW, SRS and SRS WOW symbol are trademarks of SRS Labs, Inc.

VoiceSignal is a trademark and the VoiceSignal logo is a registered
trademark of Voice Signal Technologies, Inc.

Microsoft, ActiveSync, MSN, Outlook, Windows, the Windows
logo, and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/
or other countries.

Bluetooth is a trademark owned by its proprietor and used by
Samsung Telecommunications America, Inc. under license.

Table of Contents

Section 1: Getting Started 9
Activating Your Phone 10 
Setting Up Your Voicemail 10
Understanding this User Manual 12

Section 2: Understanding Your Phone 13
Features of Your Phone 14
Front View of Your Phone 15
Key Functions 16
Closed View of Your Phone 18
Key Functions 19
Command Keys 20
Locking Your Pocket PC 22
Display Icons 24
Battery 26

Section 3: Call Functions 29
Making a Call 30
Answering a Call 31
Using the Speakerphone 32
Display Your Phone Number 32
Call History 32
Roaming 35
TTY 36
Voice Signal 37

Section 4: Menu Navigation 45
Navigating Your PDA 46
Menu Types 46
Launcher 48
Task Manager 54

Section 5: Entering Text 55
Built-in QWERTY Keypad 56
Selecting Text Input Mode 56
Word Completion 59
Text Entering Options 60

Section 6: Contacts 61
Understanding Your Contacts 62
Adding Notes to Contacts 66
Speed Dial Contacts 67

Section 7: Messaging 69
Types of Messages 70
Messaging 70
Text Messages 73
About E-mail Setup 78
E-mail using Outlook 78
E-mail using an ISP 79

Section 8: Changing Your Settings 81
i730 Settings 82
Buttons Settings 82
Sound Settings 84
Password Setting 90
Phone Settings 91

Section 9: Personal Digital Assistant 99
Your Personal Digital Assistant 100
Picsel Browser 100
Microsoft Pocket Applications 104
Dormant Mode 115
Windows Media Player ® 116
Sprite Backup Utility 118
Application Management 120
Memory Adjustments 121

Section 10: Personal Organizer 123
Today Screen 124
Calendar 126
Tasks List 130
New Command 134
Notes 134
Alarm 137
Calculator 138
ActiveSync ® 138
Install ActiveSync 139

Section 11: Network Services 143
Call Forwarding 144
Three-way Calling 144
Call Waiting 145
Caller ID 145

Section 12: Bluetooth and Wi-Fi Services 147
About Bluetooth Wireless Technology 148
Bluetooth Service Profiles 148
Bluetooth Modes 149
Bluetooth Bonds 151
Bluetooth Hands-free Device 153
Bluetooth OBEX FTP 154
Bluetooth Virtual Serial Port 156
ActiveSync via Bluetooth Wireless Technology 157
Using Bluetooth Keyboard 158
About Wi-Fi 159
Enabling Wi-Fi 159
Automatically Connecting to a Network 160
Manually Entering Network Settings 160
Changing Connection Information 161

Section 13: Accessories and Games 165
Accessories 166
Remote Control 166
Ringtone Manager 171
Beam 176
SD I/O Expansion Slot 177
Games 178

Section 14: Health and Safety Information 181
Health and Safety Information 182
Consumer Information on Wireless Phones 184
Road Safety 194
Operating Environment 196
Using Your Phone Near Other Electronic Devices 197
Potentially Explosive Environments 198
Emergency Calls 199
FCC Notice and Cautions 200
Other Important Safety Information 201
Product Performance 202
Availability of Various Features/Ring Tones 204
Battery Standby and Talk Time 204
Battery Precautions 204
Care and Maintenance 205

Section 15: Warranty Information 207
Standard Limited Warranty 208
Intellectual Property Statement 214
Samsung Telecommunications America (STA), L.P 215

Section 1: Getting Started 

Topics Covered

• Activating your phone
• Setting Up Voicemail
• Understanding this User Manual

This section allows you to start using your phone by activating your service, setting up your voice mail, and getting an understanding of how this
manual is put together. For more information contact your service provider.

Activating Your Phone
If you purchased your phone at a Verizon Wireless Store,
it is probably activated and ready to use. If you have upgraded your phone or received a new phone by mail, it probably needs to be activated before you can use it.

To activate your phone, follow these steps:

1. Visit a Verizon Wireless Store and have your phone
activated, or visit www.verizonwireless.com and place
your cursor on the MY ACCOUNT tab available on the
home page.
2. When the drop-down menu displays, select ACTIVATE
PHONE to display instructions needed to activate your
phone online.
3. After gathering the required materials, select the
Activate New Phone link and follow the online
directions to complete the activation process.

Setting Up Your Voicemail

Set up Voicemail
All unanswered calls to your Samsung i730 are sent to
voicemail, even if your device is turned off. Therefore,
you'll want to set up your voicemail and personal
greeting as soon as you activate your i730. Your service
provider has assigned your voicemail number to the 1
key.

1. Press Send key, located on the bottom front of the phone,
to display the phone screen.
2. Tap and hold 1 key to dial the voicemail system.

Note: Use of the 1 key is reserved for speed dialing voicemail. To dial
voicemail without using speed dial, simply dial your own phone number
and when the system answers, enter your password and press pound key.

3. When the system answers, enter your password and then tap pound key.
4. Follow the prompts to setup your voicemail.

Check Voicemail

1. Tap the alert icon at the top of the screen.

Note: The alert icon is displayed when more than one alert is available.

2. Tap the voice mail icon . You can also tap and hold the 1 key to speed dial voicemail.
3. Tap the Voice Mail button to connect.
4. When the voicemail system connects, enter your password and then tap the pound key.
5. Press the 1 key to listen to your messages.

Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and sub menus in your phone. 

Also included in this manual is important safety information that you should know before using your phone. 

Section 2: Understanding Your Phone

Topics Covered

• Features of Your Phone
• Front View of Your Phone
• Key Features and Command Keys
• Locking Your Samsung SCH-i730
• Display Icons
• Battery

This section outlines many key features of your phone. It also describes the display icons, frequently used command keys, your display, and how to install your battery.

Features of Your Phone
Congratulations on your purchase of the Samsung
SCH-i730. The i730 uses the Microsoft Windows Mobile ™
2003 software for Pocket PC Phone Edition, which
supports thousands of applications. Using ActiveSync(r),
you can keep your PC and i730 synchronized at all times.
The features listed below are just a sample of what your
SCH-i730 has to offer. You should read this guide to
understand the many features that this phone supports
and keep it handy for reference.

Key Features of the SCH-i730

• Large 240x320 pixel, 65k color TFT screen
• Wireless Internet Capability
• Global Positioning Technology (GPS)
• Windows Mobile™ 2003 Software for Pocket PC Phone Edition, 2nd Edition
• 2-Way Text Messaging
• E-mail Message Service
• Secure Digital Expansion Slot (SD I/O)
• Advanced Voice Recognition Technology
• Voice Memo
• Built-in Bluetooth Technology
• Built-in WI-Fi Support
• LED (Green: System, Red: Phone, Blue: bluetooth, yellow: Wi-Fi, purple: battery charging)

Front View of Your Phone

Key Functions

1. Receiver: The receiver allows you to hear the other caller when using your phone. Located just above the display screen.

2. Title Bar: The Title bar at the top of the screen displays the active program, wireless status, and current time, and allows you to close screens. Use the Start menu to select a program. Located in the top left corner of the display screen.

3. Bluetooth Indicators: The Bluetooth indicators display the status of your connection, and it allows you to quickly turn the Bluetooth function on or off. Located to the left in the bottom column on the display screen.

4. Headset Jack: Built-in stereo headset jack. Located on the left edge of the phone.

5. Today Screen: This screen displays all the information needed to operate your phone.

6. 4-Way Navigation Key: This key allows you to scroll through the phone menu options. Located directly beneath the display screen.

7. Voice Notes Key: This key launches the voice notes option which allows you to record voice notes and save them on your phone. Located on the left edge of the phone below the headset jack.

8. Volume Keys: Allows you to adjust the ringer volume in standby mode (with the flip open) or adjust the voice volume during a call. To mute the ringer during an incoming call, press the volume key up or down. Located on the left edge below the Voice Notes Key.

9. Send Key: This key is used to initiate your calls or to activate your phone feature. Located below and to the left of the navigation keys.

10. PDA Power/Key Lock: Use to turn your PDA device on and
off or lock your built-in keyboard. Located on the left edge below the volume keys.

11. Built-in QWERTY Keyboard: Use these keys to enter numbers, letters, and characters. Located on the lower face of the phone.

12. Power/Accessory Interface Connector: Used to plug in the charging accessories and also connect any available accessory cables to your phone. Located on the bottom edge of the phone.

13. Voice Signal Key: Launches the voice activated command feature used to call numbers and contacts or to quickly launch other applications. Located on the right edge of the phone at the bottom.

14. Back Key: Cancels the current function, or if in a menu, this key steps back through previous menus. Located in between the Send key and the End key.

15. End Key: Ends a call. Press and hold this key for a few seconds to turn your phone On or Off. When you receive an incoming call, press to mute the ringer and send the call to voicemail. Located below and to the right of the navigation keys.

16. SD Card I/O Slot: This I/O expansion slot allows you to insert an SD memory card to add additional memory and storage capacity. Located on the right edge above the voice signal key.

17. Action Key: Pressing when navigating through a menu selects the highlighted choice in the menu. Located in the middle of the navigation key.

18. Wi-Fi Indicator: The Wi-Fi icon indicates the Wi-Fi status, either on or off. Located on the bottom row of the display screen to the far right.

19. Status Icons: These icons indicate battery level, current signal strength, and the availability of many other features and functions of your phone. Located on the top row of the display screen to the right.

20. 1X/EVDO Icon: Indicates your phone has high speed data services.

Closed View of Your Phone

1. IrDA/LED: Used to exchange data and information between your phone and another device using infrared signaling. Also indicates when certain features are active on your phone such as Bluetooth or Wi-Fi. Located on the top left corner of the closed phone.

2. Context Menu Key: Launches menus or other option screens for the currently highlighted choice on your display. Located top left to the navigation keys.

3. Calendar Key: Launches your Calendar feature when selected. Located below the Context Menu key.

4. Reset Button: Resets your phone and ends all applications currently running. Located below the Send key.

5. Microphone: The Microphone allows other callers to hear you clearly when you speak to them. Located below the End key.

6. Contacts Key: Launches your Contacts feature when selected. Located to the right of the navigation keys below the launcher key.

7. Launcher Key: Displays the Launcher menu when selected. Located to the right of the navigation keys above the Contacts key.

8. Application Shortcuts: Allows you to quickly set the time and date for your phone, check your messages, view or set appointments, or view or add new tasks by tapping the feature your want. Located on the display screen.

9. Antenna: Your phone's built-in antenna. Located on the top right of the phone.

Command Keys

Powering On

To power up the i730, press the PDA Power key down until the
backlight comes on. The PDA Power key is located on the
lower left side of your phone.

Note: If you push the PDA Power key to its upper position, you will lock all
keys, except for Send/End/Volume, which work during calls. Set the key in
its center position to unlock.

Follow the steps on the display screen to calibrate the
device. To turn your phone off, press and hold Power until
the backlight turns off.

Your Pocket PC's Keypad
The keys of the i730 are functionally divided into three
groups. The Navigation keys, Alpha-numeric keypad,
and Hot keys (on each side of the Pocket PC).

1. Navigation: Access and scroll through menus and
lists, confirm changes that you've entered, and interact
with menus that appear in the display.

2. Alpha-numeric keypad:
Enter text, numbers, and symbols.

3. Hot keys: Located on both sides of the Pocket PC. Used
to launch applications, increase volume, power the
Pocket PC on and off, and more.

Send Key
Press Send key at the Today screen to display the phone
screen, or to dial a call after you have entered a telephone number.

Back Key
Press the Back key to close the current menu and return to
a previous menu or screen. The Back key also cancels
some functions like composing a message or exiting Launcher.

Navigation/Action Key
Use any of the four directional arrows on the Navigation/
Action key to scroll through and highlight items, menus,
and programs in a list or on the Internet. Once an item,
link, or menu is highlighted, press the action key to
perform the function related to the selection.

Voice Memo Key
Briefly press the Record/Memo key to record or
display any recordings that you have made. You have the
option of recording a new memo or playing a stored memo.

When your memo list displays, either highlight the
recording you want and tap Right navigation key to play the memo, or
simply tap Record and speak clearly into the your phone's microphone to record a new memo.

Volume Up/Down Keys
Press and release the up or down volume keys to adjust audio volume for any screen.

Locking Your Pocket PC
When you lock your phone, it requires a password to
return to normal operation. When a password is set up,
the phone can be locked immediately or configured to
lock when the screen blanks out.

Lock the i730

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap Password.
5. Tap the check box next to Prompt if device unused for.
6. Tap the drop down arrow to select the amount of unused
time before you are prompted for a password.
7. Select one of the following options:

• Simple 4 digit
• Strong alphanumeric

8. Tap the Password box and enter the password you want.
9. Tap OK, then tap Yes to confirm.

Unlock the i730

To unlock your phone:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap Password.
5. Tap your password on the keypad. If you enter the
correct password, you're returned to the Password screen.
6. Tap the box to the left of Prompt if device unused for to
remove the check mark.
7. Tap OK, then tap Yes to confirm.

Password Hint
Use the Hint feature to provide a password hint in case you forget your password.

1. At the Password screen, tap the Hint tab.
2. Enter a hint for your password in the dialogue box.
3. Tap OK to save your settings and exit.

Note: The password hint you set will only appear after four consecutive
incorrect password entries.

Display Icons
Various icons appear in your Pocket PC's displays or Title Bar during operation. The following table lists these icons as well as their descriptions.

Icon is followed by Definition

Antenna with bars icon: Indicates signal strength. More bars mean better signal.

Active GPS icon (amplifying): Indicates GPS is on for location.

GPS icon: Indicates GPS for 911 is active.

Antenna with X icon: Indicates your device is in Flight mode and your cellular
radio is turned off (i.e. the phone is turned Off but the PDA is On).

Active Ringer icon: Indicates the ringer for the selected profile is set to On.

Inactive Ringer icon: Indicates the ringer for the selected profile is set to Off.

Vibrating Phone icon: Indicates the ringer for the selected profile is set to Vibrate or Silent.

Plug-In icon: Indicates your Pocket PC is charging.

1X icon: Indicates the 1xRTT high speed data transfer protocol is supported.

EU icon: Ev-Do protocol: Indicates your phone has high speed data services, which is required for video streaming and downloads.

1X EV-DO icon: Indicates your phone is hybrid (1X and EV-DO) mode.

Triangle icon: Indicates your Pocket PC is in Roaming mode. Indicates your phone is outside of the home service area.

Active Left and Right Arrows icon: Indicates ActiveSync or a Data Session is currently in use.

Text Balloon icon: Indicates two or more message icons are being
displayed, your battery charge is low, or you have missed a call.

Sealed Envelope icon: Indicates you have a new text message. If you tap this
icon, a window is displayed that allows you to access the Inbox.

Phone receiver icon: Indicates you have a new voicemail message. If you tap
this icon a window is displayed that allows you to listen to new voicemail messages.

Phone receiver with exclamation icon: Indicates you have a missed call. If you tap the icon a window is displayed indicating the number of calls
missed. It also gives you the ability to view the missed call information.

Amplifying Phone icon: Indicates your Pocket PC is in Speakerphone mode.

Phone receiver with lock icon: Indicates that Voice Privacy is available.

Wi-Fi icon: Indicates that a Wi-Fi connection is available and active.

Bluetooth icon: Indicates the status of the Bluetooth radio, either On or Off..

Lock icon: Indicates the key is locked.

Battery
The i730 comes with a standard rechargeable battery, power accessory, and headset.

Note: The battery for the i730 can be charged before it is fully drained
without causing damage.

Install the Battery

1. Place the battery on the back of the phone, making sure the plastic tabs are aligned with the corresponding holes in the phone.
2. Gently push the battery up until it snaps into place.

Remove the Battery

• Push the battery release latch, then slide the battery toward the
bottom end of the phone.

Charge the Battery

Note: The i730 comes with a rechargeable battery. Fully charge this
battery before using your phone.

Your phone is powered by a rechargeable standard
Li-ion battery. Only use Samsung-approved charging
devices and batteries. Samsung accessories are designed
to maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.

Use the dual desktop charger/cradle or the travel adapter
to charge the battery provided with your handset.

Checking Battery Charge
Keeping track of the battery's charge is important. If the
battery level becomes too low, your phone automatically
shuts down and you could lose important data. For a
quick check of your phone's battery level, tap the time
located in the upper right corner of the screen. A battery
icon is displayed in the Time and Next Appointment
window.

To perform a battery check using the drop down menu:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the System tab at the bottom of the screen.
4. Tap Power.

Battery Capacity
When the battery becomes low, a warning window
displays and the backlight turns off.

Note: Long backlight settings, searching for service, vibrate mode and
browser use affect the battery's talk and standby times.

There is also an internal backup battery that saves all
settings in the phone if the regular battery is discharged.
An internal backup battery needs an initial charge of 24
hours.

The internal battery maintains data for about four hours.
Perform ActiveSync operations or a backup utility
frequently to avoid loosing any information in case the
battery is fully discharged..

Section 3: Call Functions

Topics Covered

• Making a Call
• Answering a Call
• Using the Speakerphone
• Your Phone Number
• Call Log
• Roaming
• TTY
• Voice Signal

This section describes how to make or answer calls.
It also includes the features and functionality
associated with using your phone, as well as
explaining the voice command feature built into
your Samsung SCH-i730.

Making a Call
There are several ways to make calls on your new i730.
You can use speed dial, voice dial, call history, or simply
enter the desired number and tap Talk.

Note: Keys, such as Talk, are referred to as "soft" keys because they
are not part of the hardware. Soft keys are touch-sensitive keys, appear in
your display, and change function according to the feature being used.

Place a Call Using Soft Keys

1. Set the PDA Power key to its middle position.

2. With the slider down, tap Start, then select Phone from the drop down menu.

3. Tap the desired number using the stylus. If you make a
mistake while dialing, tap Left. If you tap and hold
Left, all digits are cleared and you can start over.

Note: Always use the stylus when touching the screen to avoid scratching
or damage caused by other instruments.

4. Tap Talk. The number is dialed.

Place a Call Using the Keypad

1. Extend the slider up, then enter the number using the keypad.

2. Press Send key. The number is dialed.

One-handed Dialing
One handed dialing allows you to make a call while using
just one hand. To make a call:

1. Press the Contacts button.
2. Use the up or down navigation key to select the contact entry you want to dial, then press Action key.

Note: If you press and hold the OK/Navigation key down, letters are
displayed that will automatically display the first entry beginning with that
letter.

3. Use the up or down navigation key to select the number you want to dial, then press Send key to display the number in the phone screen.
4. Press Send key again to dial the number.

Answering a Call
Make sure that the phone is turned on.

When you receive an incoming call, the Phone Incoming
screen is displayed. Tap Answer to answer the call or tap
Ignore to let the call go to voicemail.

Note: When you receive a call, you can silence the ringer by pressing the
volume key on the side of your phone.

Using the Speakerphone
The speakerphone allows you to speak to others without
the need to hold the phone to your ear.

1. While in a call, press and hold Send key to activate the
speakerphone. The speakerphone icon appears in
the top of the screen.

2. To deactivate the speakerphone, press and hold Send key
again.

Display Your Phone Number

1. Tap Start, then select Phone from the drop down menu.
2. Tap Tools, then select Options.
3. The Settings screen displays with your phone number at
the top of the screen.
4. Tap OK to exit.

Call History
When a call is received, made, or missed a record of the
call is saved with all the available information in Call
History. The Call History logs are:

• All Calls - Displays all call received, sent, or missed.
• Missed - Displays any missed calls.
• Outgoing - Displays all outgoing calls made from your phone.
• Incoming - Displays all the incoming comes that were
answered.
• By Caller - Allows you to select an entry from the contacts and
then displays any call information related to the contact.

If you tap the entry, the time, date, and duration of the call
appears in the display.

To access the Call History menu, follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Tap Phone from the drop down menu.
3. Tap Call History to display the Call History menu.

Place a Call Using Call History

1. From the phone screen, tap Call History.
2. Tap the drop down arrow in the upper left corner and
select the desired call log list.
3. Tap the phone icon located to the left of the entry to
make a call.
4. When finished, tap OK.

Call History Options
Call log options allows you to view the call times for all
calls and recent calls. You can also set the amount of time
to keep call log items before they are deleted. To access the
call log options:

1. From the phone screen, tap Call History.
2. Tap Tools and select Call Timers.
3. Tap the drop down arrow under Delete call history
items older than and select the option you want.
4. Tap OK to exit.

Create a Contact Using Call History

1. From the phone screen, tap Call History.
2. Tap the drop down arrow in the upper left corner and select the desired call history list.
3. Tap and hold on the desired entry. Select Save to Contacts from the menu.
4. Enter the contact information.
5. When finished, tap OK.

Deleting Call History Entries
To delete call history entries:

1. From the phone screen, tap Call History.
2. Tap the drop down arrow and select the desired call history list you want.
3. To delete a call from the list, tap and hold the entry you want to delete, then tap Delete from the pop-up menu.
4. Tap Yes to confirm the deletion, then tap OK to exit.
5. To delete all calls in the call list, tap Tools and select Delete all calls.
6. Tap Yes to confirm the deletion.
7. Tap OK to exit and return to the phone screen.

Note: To delete all call history entries, select All Calls.

Send Message using Call History
Text messages can be sent to other users that support SMS capabilities.

Note: Contact your service provider for more information on SMS messaging services.

To send a new text message from a call history entry:

1. From the phone screen, tap Call History.
2. Tap the drop down arrow and select the desired call log list.
3. Tap and hold on the desired entry. Select Send Text Message from the menu.
4. Enter the subject and message, and tap Send when finished.

Roaming

What is Roaming
Your phone can roam on other digital networks. Roaming
occurs when you travel outside a pre-designated
coverage area. The roaming icon appears on when in
roaming is active, and extra charges may apply when
making or receiving a call.

Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent charges.

Roaming Options
The following roaming options are available:

• Home only - Your phone is available for normal operation only in the designated coverage area.
• Automatic-A - The preferred roaming list is used to acquire service. If no preferred systems are found, any digital "A" system is acquired.
• Automatic-B - The preferred roaming list is used to acquire service. If no preferred systems are found, any digital "B" system is acquired.

Note: Contact your service provider for information regarding preferred systems.

To change your Roaming option, follow these steps:

1. Tap Start, then select Phone from the drop down menu.
2. Tap Tools, then select Options. The Settings screen is displayed.
3. Tap the Service tab, then select the Roaming option you want from the drop down menu.

TTY
Your i730 is fully TTY compatible, and it allows you to
connect TTY equipment to the phone's headset jack.
However, before you can use a TTY device, you need to
enable TTY functions using these steps:

1. Tap Star key, Star key, 8, 8, 9.
2. Tap On (or Off).
3. Tape Save to exit and return to the Phone screen.

Voice Signal
Voice Signal is advanced speech recognition software
that can be used to activate a wide-variety of functions on
your Pocket PC. Voice Signal software automatically
voice activates all numbers in your Contacts for voice
dialing or searching, and no pre-recording or training is
needed.

Voice Signal commands allow you to dial numbers,
lookup contact information, and open applications using
your voice. Simply say a command at the prompt to open
your contacts, launcher, the Picsel Browser, and more.

1. In standby mode, press and hold the Voice Signal key on the right side of your phone.
2. After a brief pause, "Say a Command" appears in the display and is pronounced through the speaker.
3. After the phone beeps, say the name of the command that you want to perform. The Voice Signal commands are:

• Call: Lets you dial a phone number by saying a name saved in
your contact list or by saying the digits in the telephone number.
• Lookup: Lets you retrieve contact information for any entry in your contacts list.
• Open: This provides you with one-step access to many of your phone's applications such as Calendar.

The following sections provide more information about the Voice Signal commands.

Call a Name or Number
The Call command lets you dial a person by saying the
name you've stored for that person in your contact list or
by saying the telephone number's digits, even if you have
not saved the number in contacts.

Voice Dialing Tips

• Voice dialing works best in quieter environments.
• When pronouncing a name or number, speak at a normal speed, and there is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six, seven, eight, nine, zero, and oh (zero). It doesn't recognize numbers such as "one eight hundred" for "1-800." Instead, say "one eight zero zero," or "one eight oh oh."
• The phone recognizes only valid seven or ten-digit North American phone numbers, optionally preceded by the digit "1."
• If you are experiencing frequent problems with Voice Dial recognizing your commands, try adapting it to your voice, which greatly improves its accuracy. 

Dialing a Name

1. In standby mode, press and hold the Voice Signal key on the right side of your phone.
"Say a Command" appears in the display and is pronounced through the speaker.

2. Say "Call."
The phone prompts, "Say the name or number."

3. Say the full name of the person you want to call, exactly as it is entered in your Phonebook.
The phone may display one or more names on the
screen and prompts "Did you say?"

4. To confirm the name you spoke, wait for the beep and
then say "Yes" or choose the correct name from the
choice list using your navigation key.

Note: If the name that you pronounced has more than one associated
number, the phone displays the different locations (such as "home" or
"work") and prompts you, "Which number?" In this case, pronounce the
location that you want to call. The phone dials the number.

5. The phone repeats what you said and then prompts, "Connecting" and dials the number.

Digit Dialing

1. In standby mode, press and hold the Voice Signal key on the right side of your phone.
"Say a Command" appears in the display and is pronounced through the speaker.

2. Say "Call."
The phone prompts, "Say the name or number."

3. Pronounce the number naturally and clearly.
The phone may display one or more names on the screen and prompts "Did you say?"

4. To confirm the number you spoke, wait for the beep and then say "Yes" or choose the correct name from the choice list using your navigation key.

5. The phone dials the number.

Adapting Digits
Voice dialing works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may receive better results
after adapting the system to match their voices.

Note: You should adapt Digit Dial only if the system is frequently unable to
recognize your speech. After you adapt Digit Dial, your phone is customized
to your voice, and your voice only. Others will not be able to use it unless
they reset the phone to factory defaults.

Adaptation involves recording several digit sequences to adapt the system to the unique properties of your voice. The adaptation process takes about three minutes.

Tips for Adapting Digit Dial

• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, rerecord
that sequence.
• Only adapt digits if you regularly have problems with digit
dialing. Once adapted, digit dialing will not work as well for
other people using your phone.

Adapt Digit Dial to Your Voice

1. In standby mode, press and hold the key on the right side of your phone.
2. Tap Settings.
3. Tap Digit Dialing.
4. Tap Adapt Digits.
5. Read the description until you are comfortable to proceed, then tap OK.

Your phone displays the first digit sequence and "Please
say" plays through the speaker followed by the four
digits appearing in the display.

6. Wait for the beep and repeat the digits using your normal tone of voice.
7. After a moment, the phone plays back the recording and
prompts "Did the recording sound ok?" If the recording
was good, say "Yes." If you need to re-record, say "No."

If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you're satisfied with the recording.

8. After confirming that a recording sounds ok, repeat the
recording process with the next set of digits until all
sequences have been completed.

9. After the final sequence, the phone prompts "Adaptation complete."

Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to its original state.

1. In standby mode, press and hold the key on the right side of your phone.
2. Tap Settings.

Note: Reset Digits is only available if you have adapted digit dial for your voice.

3. Tap Digit Dialing.
4. Tap Reset Digits.
5. When the confirmation screen displays, tap OK to proceed, or tap Back to cancel.
6. If you tap OK, then the message "Digit Adaptation Reset" displays.

Looking up Contacts
Use the Lookup command to look up contact information for any person stored in your Contacts list.

1. In standby mode, press and hold the Voice Signal key on the right side of your phone.
The phone prompts, "Say a command."

2. Say "Lookup" followed by the name of a person in your Contacts list.
After you say a name, you may be prompted, "Did you
say?" followed by the first of up to three names. To
confirm a name, wait for the beep and then say "Yes."

If there is no match found, the phone responds with "Sorry, no match found."

Opening Applications
The Open command allows you to open an application or
to quickly access several menus on your phone.

1. In standby mode, press and hold the key on the right side of your phone.
The phone prompts, "Say a Command."

2. Say "Open" followed by the application or menu item you want.
For example, say, "Open Contacts." The Contacts screen is displayed.

Note: To see a list of applications or menu items, say "Open" but do not
specify a destination. Your phone displays available options and prompts
"Please Choose." Say "Next Menu" to scroll through other available
choices applications and menu choices.

Section 4: Menu Navigation

Topics Covered

• Navigating your PDA
• Menu Types
• Launcher
• Task Manager

This section explains the menu navigation for your
phone. It also includes a description of the Launcher
and Task Manager applications included with your
Samsung SCH-i730.

Navigating Your PDA
Your i730 provides the power of a personal computer
with exceptional portability and integration. Unlocking
its power begins with customizing the i730 so that it
becomes an extension of your desktop or laptop
computer.

The i730 is powered by Windows Mobile 2003 Software
for Pocket PC Phone Edition, providing the power and
familiarity of Microsoft Windows. Pocket versions of
popular Microsoft applications such as Word, Excel,
Windows Media Player(r) and Outlook(r) eliminate the
need to learn new software.

Menu Types
There are two menus available in the i730 menu options.
They include the following:

• Start Menu
• New Menu.

The Start menu contains links to all the applications and
settings information, similar to a Windows based PC
system. To access the Start menu, simply use the stylus to
tap in the upper left corner of the screen on the word Start.
A menu list is displayed, and from this pull down type
menu, all other applications and settings can be accessed.

The New menu options allow you to configure what
is displayed when you tap on the New menu located in the
bottom left corner of the screen.

Both the Start and New menus can be modified to
display some or all of their options. To access and
change these menus, follow the steps below.

Start Menu

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Menus icon. The Start Menu tab displays.
4. Check the items that you want displayed in the Start menu. Items that are not checked are displayed in the Programs menu.
5. Press OK to save your settings and exit.

New Menu

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Menus icon, then tap the New Menu tab.
4. Check the items that you want to be displayed in the New menu.
5. Press OK to save your settings and exit.

Launcher
The Launcher application is a task and file launcher with
great additional features. Programs, games, utilities,
and files can all be launched from customized pop-up
windows using your stylus or function keys located on your i730.

Opening Launcher
You can open the Launcher application two ways. Either
press the Launcher key on the i730, or follow the steps below
to access the application using menu selection.

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Launcher. The Launcher pop-up window displays.

Launcher Groups
When you open the Launcher application, a Group window displays. Your phone has the following default pop-up windows for the Launcher application:

• MITs
• Mobile Office
• Utilities
• Games
• Control Panel

Except for the Control Panel window, each pop-up can be
changed to delete or include programs or features in your
phone that you use often or want to group specifically
group together. Additionally, you can add new groups
and customize their windows also.

To display a group or to change from one group to
another, follow these steps:

1. Press the Launcher key to open the Launcher application. The last active group used by the application displays.
2. To change to a different group, tap Left to display the group before, or tap Right to display the group after the currently displayed pop up window.
3. You can also tap the title bar the current pop-up window to display a drop down that lists all groups, and then select the group you want from the list.
4. After your selection, the program or function you chose is displayed and the Launcher window closes.

Launcher Configuration
You can customize each pop-up window available in the
Launcher application. You can add your own user
defined pop-up lists or move functions and features
between the groups that are already defined.

To display the Launcher Configuration console, follow these steps:

1. Press the Launcher key to open the Launcher application. The last active group used by the application displays.
2. Tap Setting located at the bottom of the Launcher window.

Adding and Deleting Launcher Groups
To add a group that displays as a pop-up window when Launcher opens, follow these steps.

1. Press to open the Launcher application. The last active group used by the application displays.
2. Tap located at the bottom of the Launcher window.
3. Highlight any group in the Group panel on the configuration screen.
4. Tap New, then enter the name of the new group. The name you choose can have a maximum of 25 characters.
5. Tap OK. The name of the new group displays in the Group panel at the bottom of the list.

Note: To move a group either up or down in the list, highlight the Group name and then tap either Up or Down buttons in the Group panel.

To delete a group that displays as a pop-up window when Launcher opens, follow these steps.

1. Press the Launcher key to open the Launcher application. The last
active group used by the application displays.
2. Tap Setting located at the bottom of the Launcher window.
3. Highlight the group you want to delete in the Group panel on the configuration screen.
4. Tap Delete. A confirmation window displays.
5. Tap Yes. The group is deleted and the configuration screen displays.

Adding and Deleting Functions in a Group
The functions and the features that display in a group
pop-up window when Launcher opens can be moved
between groups or deleted from an existing group, or you
can add functions, applications, or features that you use
to any group you create.

Group must already be defined or added before you can
move applications to them. If you need information
about adding a group to Launcher, see the section above
"Adding and Deleting Launcher Groups."

Once a group is setup in Launcher, you can follow these
steps to add an application or other function to the pop-up
window.

1. Press the Launcher key to open the Launcher application. The last active group used by the application displays.
2. Tap Setting located at the bottom of the Launcher window.
3. Highlight the group you want to add a function to in the Group panel on the configuration screen.

The name of the group that you highlight appears above
the lower panel on the configuration screen, as well as
any applications or other functions already stored in the
group.

4. To add a new application or other feature to the group, tap New.

The Select a Program screen displays and is similar to
the File Manager function. Use the menu tree to navigate
to the folder that contains the application or feature you want add.

Once you select the folder that contains the target
function, a list of programs or link files display in the
bottom portion of the Select a Program screen.

Note: If you select a folder that does not contain either executable or link
files (i.e., .exe or .lnk), then the bottom pane of the screen remains empty.

5. Select the program or link you want, then tap OK. The Edit display name screen displays with the default name of the program in the Name field.

6. Change the name of your selection, if desired, and tap
OK. The Configuration screen displays and the
application, folder, or feature you selected appears in the list.

7. Repeat Steps 4 through 6 until you have added all of the
features you want in the group, then tap OK. The Today
screen displays and last active Launcher window displays.

8. To view the group you made change to, navigate to the group window you want. 

To delete a function from a group in Launcher, follow these steps.

1. Press the Launcher key to open the Launcher application. The last active group used by the application displays.

2. Tap Setting located at the bottom of the Launcher window.

3. Highlight the group you want to delete a function from in
the Group panel on the configuration screen.

The name of the group you highlight appears above the
lower panel on the configuration screen, as well as any
applications or other functions already stored in the group.

4. To delete an application or other function associated with
the group, highlight the function you want to delete, then
tap Delete. A confirmation screen displays.

5. Tap Yes to confirm. The Configuration screen displays
and the function you deleted is removed from the group.

Note: Deleting an application or function from a group in Launcher does
not delete the feature from your Pocket PC. You are removing a shortcut in
Launcher and not deleting the program from your Pocket PC.

Moving Functions Between Groups
To move an application or another function from one group to another, follow these steps.

1. Press the Launcher key to open the Launcher application. The last
active group used by the application displays.

2. Tap Setting located at the bottom of the Launcher window.

3. Highlight the group in the Group panel that contains the application or function you want to move.

The name of the group you highlight appears above the
lower panel on the configuration screen, as well as any
applications or other functions already stored in the
group.

4. Highlight the application or other function you want to
move, and then tap Move. The Move to group screen displays.

5. Highlight the group where you want to move the
application or function you selected, then tap OK. The
Configuration screen displays and the application or
function is moved.

Task Manager
The Task Manager is an application that shows the
programs that you are currently running as icons so you
can quickly select or close them.

To open the Task Manager, follow these steps:

1. Press and hold the Launcher key. The Task Manager bar displays.
2. Use the right or left navigation keys to highlight the program you want.
3. Tap the Action key to select the program and display it on your screen.

Section 5: Entering Text

Topics Covered

• Built-in QWERTY Keyboard
• Selecting Text Input Mode
• Word Completion
• Text Entering Options

This section outlines how to select the desired text
input mode when entering characters into your
Samsung SCH-i730. This section also describes the
predictive text entry system that reduces the
amount of key strokes associated with entering text.

Built-in QWERTY Keypad
Your i730 has a built-in standard typing keypad,
commonly called QWERTY, which can be accessed when
you extend the slide to it up position. Using this keypad,
you can type letters, punctuation, numbers, and other
special characters into text entry fields or other
applications available on your Pocket PC.

Selecting Text Input Mode
There are five different character input methods available. They are:

• Built-in QWERTY keyboard
• Block Recognizer
• Keyboard
• Letter Recognizer
• Transcriber

Each of these methods allow you to input alphanumeric
characters and symbols into the i730. In addition to the
input methods, there is Word Completion and other
options associated with the input selected.

To access the Input settings:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap the Input icon.

Block Recognizer
This input method uses the traditional writing area box
split in the middle. The left side is used to write letters and
the right side is for number entry. Symbols and common
functions are located in other smaller boxes located to the
right of the writing box area. There are no options
associated with this type of input method.

Keyboard
This input method displays an on-screen keyboard that
can be used to input characters by tapping the screen
using the stylus. The keyboard entry method has the
following options:

• Large keys
• Small keys
• Use gestures for the following keys

To select larger or smaller keys, simply tap the button next to the desired option.

The gestures feature allows you to replace keys used on
the keyboard for space, backspace, shift+key, and enter
by drawing a gesture or motion. The large key option
must be selected for this option to be available.

Letter Recognizer
This option allows you to enter text using your own
handwriting. The screen is divided into three different
areas. A capital letter area, small letter area, and a number
area. Characters are entered by printing letters in each
area. The character is then analyzed and typed on the
screen automatically. The following options are
associated with this method:

• Quick stroke
• Right to left crossbar
• Allow accented characters

Transcriber
The transcriber option is similar to the letter recognizer,
except instead of entering characters into a designated
area, you can enter entire words and sentences using your
own handwriting. Transcriber supports both printing
and cursive writing styles and then automatically types
the information on the screen. The following general
options are associated with this method:

• Sound On - Turns the sound On or Off.
• Show into screen - Displays the help or introduction screen whenever the transcriber option is selected.
• Show icon bar - Displays the icon bar.
• Inking Color - Allows you to select the color and size of the stroke line.

There are also some transcriber recognizer options. They are:

• Add space after - Automatically adds a space after each writing.
• Separate letters mode
• Speed of recognition vs. Quality - Determines the speed at which the writing sample is analyzed. The faster the setting the less likely to get all words correct. Better quality is achieved with longer processing.
• Recognition start time - Allows you to set the time of recognition between new writings.

Word Completion
Word completion settings determine if words
automatically display after entering a defined number of
characters on the screen. The following options are available:

• Suggest words when entering text
• Suggest after entering (1-7) letter(s).
• Suggest (1-4) word(s).
• Add a space after suggested word.
• Replace text as you type.

To access the Word Completion settings:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab, and then tap the Input icon.
4. Select the number of letters or words by tapping the drop down arrow associated with each option.
5. Tap OK to save and exit.

Text Entering Options

Note: The options settings only apply when writing or recording is supported.

In the options tab, you can select:

• Default zoom level for writing
• Default zoom level for typing
• Capitalize first letter of sentence
• Scroll upon reaching the last line

To access the Options settings:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab, and then tap the Input icon.
4. Select or tap the drop down arrow associated with each option.
5. Tap OK to save and exit.

Section 6: Contacts

Topics Covered

• Understanding Your Contacts
• Adding Notes to Contacts
• Speed Dialing Contacts

This section describes how to manage your daily contacts by storing someone's name and number in your phonebook. These entries can then be sorted by name, entry, or group.

Understanding Your Contacts
The Contacts feature is used to save important
information regarding your friends, colleagues, or
business acquaintances. The contacts screen allows you to
save the person's:

• Name
• Job Title
• Department
• Company
• Work Telephone, Fax & Address
• E-mail
• Mobile Telephone
• Web page
• Office Location
• Home Telephone & Address
• Categories
• Other Addresses
• Pager
• Car Telephone
• Home Fax
• Work2 & Home2 Telephone
• Radio Telephone
• E-mail2 & E-mail3
• Assistant
• Assistant Telephone
• Birthday
• Anniversary
• Spouse
• Children

In addition to the information available in contacts, you
can also record or write a note associated with the contact.
All of this information can be synchronized with a PC or
Laptop using the Microsoft ActiveSync application. 

Add a New Contact

1. Tap Start located in the upper left corner of the screen and select Contacts.
Note: You can also press the Contacts button located in the front on the lower right corner of the i730.
2. Tap New.
3. Enter the desired information in the spaces provided. When finished, tap OK.

Find a Contact
To locate a specific contact, you can use the find feature.
Find allows you to enter the first few letters of the contact
entry and then have the results displayed on the screen.
The Find box is located in the upper right corner of the
contact screen. To find a contact:

1. Press the Contacts key to open Contacts.
2. Tap the Find a name box and enter the first few letters of the desired entry.
3. Tap the entry from the list of possible matches to view the summary screen
4. If the entry is not the one your looking for, tap OK to return to the list of possible matches.

Edit a Contact

1. Press the Contacts key to open Contacts.
2. Locate the desired contact using find or scrolling through the contact list with the navigation key.
3. Tap the desired contact to view the summary screen.
4. Tap Edit.
5. Change or update the desired information.
6. Tap OK to save and exit.

Delete a Contact

To delete a contact:

1. Press the Contacts key to open Contacts.
2. Use the navigation key to highlight the contact you want to delete.
3. Tap Tools and select Delete Contact.
4. Tap Yes to confirm the deletion.

Make a Call from Contacts

To make a call from the contacts screen:

1. Press the Contacts key to open Contacts.
2. Tap the desired contact from the list.
3. From the summary screen, tap the phone number.
4. The call is dialed automatically. To end the call, tap the End button on the Phone Connected screen.

Note: If you tapped Hide, you can display the phone main screen by
tapping the signal strength icon in the top right of the screen.

Beam a Contact via IR
Your i730 is equipped with an infrared port (IR) which
allows you to send and receive information wirelessly
between two IR Pocket PC devices. To beam a contact:

1. Press the Contacts key to open Contacts.
2. Tap the desired contact from the list to view the summary screen.
3. Tap Tools and select Beam Contact.
4. Align the ports between the two devices.
5. When the contact has been successfully transferred, tap OK to exit.

Beam Contacts via IR without Confirmation
You can send and receive many contacts via IR without a
confirmation message. To beam many contacts at once,
follow these steps:

1. For the device that will receive the contacts, tap Start and then select Settings.
2. Tap Connections and select Beam.
3. Tap Receive an infrared beam, which sets the device to Beam Receive mode.
4. For the device sending the contact information, press the Contact button to open Contacts.
5. Select the contacts from the list by dragging your pointer across the entries you want.
6. Tap Tools and select Beam Contacts.
7. Align the ports between the two devices.
8. When the contacts have been successfully transferred, tap Close to exit.

Adding Notes to Contacts
Notes allow you to record or write a note that is attached
and saved with the contact entry. When you view the
summary screen on the contact, you can view or listen to
any notes that are associated with the contact.

Adding a Note

1. Press the Contacts key to open Contacts.
2. Tap the desired contact from the list.
3. Tap the Notes tab.
4. To record a note, tap record icon located in the command bar. Tap Record to begin the voice recording. Tap Stop when finished.
5. To write a note, tap the pen icon and enter the note using the desired entry method.
6. To exit and save, tap OK.

Deleting a Note
To delete a note:

1. Press the Contacts key to open Contacts.
2. Tap the desired contact from the list.
3. Tap the Notes tab.
4. Tap Edit and select Select All.
5. Tap Edit and select Clear.
6. To exit and save, tap OK.

Speed Dial Contacts
Speed dial can be used to the dial contacts that you talk to
the most. Speed dial allows you to press either one or two
keys to dial to the contact. Memory locations 2-99 are
available for speed dialing. To speed dial:

1. Tap Start located in the upper left corner of the screen.
2. Tap Phone, and then tap Speed Dial.
3. Tap New in the bottom left corner of the screen.
4. Tap the contact that you want to add to Speed Dial.
5. Tap the up or down arrows next to Location to select the desired memory location.
6. Tap OK to save.
7. To exit the contact summary screen, tap OK again.

Section 7: Messaging

Topics Covered

• Types of Messages
• Messaging Inbox
• Text Messages
• About E-mail Setup
• E-mail Using Active Sync
• E-mail Using ISP

This section discusses the types of messages you
can send and receive, how to set up your phone to
work with email, and how to send email messages
using different types of connections.

Types of Messages
The i730 is capable of sending E-mail and text messages.
To send E-mail, you'll have to install ActiveSync on your
PC and create a Standard Partnership.

Send text messages by simply entering the phone number
of the recipient when creating a new message.

Messaging
All incoming messages arrive and are stored in the Inbox
until deleted. If memory is full, new messages are rejected,
so you should delete older messages to free up space for
new messages. The Inbox has three sub menus at the
bottom of the screen labeled, which are New, Tools, and
Accounts. The following sections cover each of these sub
menus in more detail.

New
Use the New sub menu to compose and send a new E-mail
or text message. Send a text message by entering the
phone number of the message recipient in the To field, or
send an E-mail by entering their E-mail address.
Whichever method you use to send a message (E-mail or
text), you'll need to set up an account, which is discussed
later in this section.

Note: Text messages can only be sent to compatible phones and devices.

To compose a new message, follow these steps:

1. Tap Start, then tap Messaging.
2. Tap New at the bottom of the screen.
3. Tap the To field, then enter the E-mail address or phone number of your recipient.
4. Tap the Subj field, then enter a subject for your message.
5. Below the Subj field is a large box. Tap your stylus in this area, then begin composing your message using the preferred method of text entry.

Note: Tap the up arrow next to the keyboard symbol at the bottom right of
the screen to choose your method of text entry.

6. Once you've finished composing your message, tap Send, which is located next to the To and Subj fields.

Tools
The Tools sub menu allows you to view your message
folders, empty deleted items from your Deleted Items
folder, edit My Text Messages (pre-composed messages),
check the status of messages, and set options such as reply
format and others.

1. Tap Start, then tap Messaging.

2. Tap Tools at the bottom of the screen. A pop-up menu
appears in the display with the options listed below:

• Manage Folders: Allows you to create, rename, or delete a folder.
• Empty Deleted Items: Empty any messages in your Deleted Items folder.
• Edit My Text: Edit any of the canned (pre-composed) messages that came with your phone.
• Status: Check the status of messages.
• Options: Set options such as reply format and more.

3. Tap on any of the options to open the folder and perform
the functions listed in the previous table or to view the folder's contents.

Accounts
Set up accounts for each method that you want to use for
sending messages. Accounts are necessary for sending
text and E-mail messages, whether using your ISP or ActiveSync.

1. Tap Start, then tap Messaging.
2. Tap Accounts at the bottom of the screen. A pop-up
menu appears in the display with the options listed below:

Note: The Clear ActiveSync or Clear SMS options do not display together
but depend on the type of session selected.

• Connect: Connect to your service provider.
• Clear Text Messages: Clear scheduled SMS sessions.
• New Account: Set up a new account for sending messages.
• Accounts: View your current accounts, or set up a new account.
• Text Messages: Select the SMS account for sending messages.
• Outlook E-Mail: Select the Outlook account for sending messages.

3. Tap on the options you want and then perform the
functions listed or view the folder's contents.

Text Messages
You can send and receive text messages with other users
that have SMS (Short Message Service) capability. Text
messaging, or SMS messaging, can be sent from one
device to another by addressing a message to the
recipient's phone number.

Create and Send a Text Message

1. Tap Start, then tap Messaging.
2. Tap New.
3. Enter the phone number(s) of up to ten recipient(s) in the To field. Place a semicolon between numbers, if there is more than one.

Note: To select a number from contacts, tap the Contacts icon at the bottom of the screen and select from your list of contacts.

4. Tap the Subj field and enter a title for the message.
5. Tap the message area and enter a message using the
desired method of input. When finished, tap the double
drop down arrows to the right of the Subj field.
6. Tap the drop down arrow next to Account and make sure that Text Messages is selected.
7. If you would like a delivery confirmation, then tap Tools
and select Options. Tap the check box next to Request
message delivery notification.
8. Tap Send to send the message.

Note: There is a 160-character limit for text messages. The limit applies to
messages sent using Text Messaging only. If you send a text message with
more than 160 characters, the message truncates after the first 160
characters. Remaining characters are sent in separate messages until all
characters have been sent. Charges apply in accordance with the sender's
and the recipient's calling plans.

My Text Messages
My Text Messages consist of 9 pre-composed text
messages that you can use quickly to send replies without
having to type a message. The default messages are:

• Yes.
• No.
• Thanks.
• Please call my mobile.
• Please call my assistant.
• I'll be right there.
• I'm running late.
• I'll get back to you.
• I love my Pocket PC!

Using My Text Messages

1. Create a new text message.
2. Tap My Text and select the desired message from the list.
3. Tap Send to send the message.

Cancel a Message

From the new message screen, tap Edit and select Cancel Message.

Message Tools
Several message features are available under Tools when
sending a Text message.

• Add Attachment: Browse for and attach a file to the message you're composing.
• Spell Check: Spell check your message.
• Check Names: Check contacts for the name of the recipient.
• Edit My Text: Edit the pre-composed text messages or create your own unique messages.
• Language: Select the character set used for your message.

Spell Check a Message

1. Create a new text message.
2. Tap Tools and select Spell Check.
3. When the spell check is finished, tap OK.
4. Tap Send to send the message.

Check Names

1. Create a new text message.
2. Tap Tools and select Check Names.
3. Tap OK to return to your message.

Edit My Text Messages
To edit My Text Messages, follow these steps:

1. Open a text message.
2. Tap Tools and select Edit My Text.
3. Select the message that you want to edit.
4. Delete the old message from the box and enter a new message.
5. Tap OK to save and exit.

Text Message Folders
There are five message folders in the Text directory. The
folders and their functions are similar to the folders in the
ActiveSync directory, except for Outbox. In ActiveSync,
E-mail is stored in the Outbox until you perform an
ActiveSync with your PC. In Text Messages, new
messages are stored in the Outbox folder until message
sending is complete. The following is a list of Text folders
and their function.

• Deleted Items: Deleted messages are sent to the Deleted Items
folder. Once messages are removed from the Deleted Items
folder, they are permanently erased.

• Drafts: Drafts contain all SMS messages that were not
completed and saved to be sent at a later date.

• Inbox: All incoming SMS messages arrive and are stored in the
Inbox until deleted. If memory is full, new messages are
rejected. Delete older messages to free up space for incoming
messages.

• Outbox: When you send a message, it is stored in the Outbox
message sending is complete.

• Sent Items: Sent Items keeps a record of all sent messages from your device.

Access Text Message Folders

1. Tap Start, and then select Messaging.
2. Tap Accounts and then select Text Messages.

3. At the top of your screen is an arrow for a drop-down
menu. Tap this arrow to display a menu tree that lists the
folders for Outlook E-Mail, Text Messages, and any other
accounts you have created.

4. Expand the folders for Text Messages by tapping the Plus
sign next to Text Messages. Select Inbox to display its contents.

Note: Tap any of the folders within any of the account trees to view the folder's contents.

About E-mail Setup
E-mail can be sent and received using ActiveSync, or you
can also configure the i730 to send E-mail using an ISP account.

Note: For wireless sync E-mail, refer to Wireless Sync on the
Companion CD included in your Gift Box.

E-mail using Outlook
Install ActiveSync on your PC and set up a Standard
Partnership, so you can send/receive E-mail. See "Setup
a Partnership" on page 140. E-mail is composed off-line
and is sent to the intended recipient(s) the next time you
perform ActiveSync.

1. Tap Start, and then select Messaging.
2. Tap New and enter the E-mail address in the To field.
3. Tap the Subj field and enter a subject.
4. Tap anywhere in the message body field and enter the content of your E-mail.
5. When you're finished, tap Send. When you synchronize
your i730 with your PC, the message is sent through your PC's E-mail client.

Outlook Message Folders
There are five message folders in the Outlook directory.
Each folder and its related function is listed below:

• Deleted Items: Deleted E-mail is sent to the Deleted Items
folder. Once E-mail are removed from the Deleted Items folder,
they are permanently erased.

• Drafts: Drafts contain all E-mail messages that were not
completed and saved to be sent at a later date.

• Inbox: All incoming E-mail arrives and is stored in the Inbox
until deleted. If memory is full, new messages are rejected.
Delete older messages to free up space for incoming
messages.

• Outbox: When you send an E-mail, it is stored in the Outbox
until you ActiveSync with your PC.

• Sent Items: Sent Items keeps a record of all sent E-mail from your device.

Access Outlook Message Folders

1. Tap Start in the upper left corner of the screen, then tap
Messaging.

2. Tap the drop down arrow next to Inbox. A directory of
folders for Outlook and Text messages appears in the
display.

3. Tap the + sign to the left of Outlook to display the
Outlook folder hierarchy (if necessary).

4. Tap any of the folders in the Outlook directory to view the
folder's contents.

E-mail using an ISP
If you've configured the i730 to send E-mail using an
Internet Service Provider (ISP), you can send E-mail
directly from the i730 without connecting to your PC
through ActiveSync.

Tip: Before you can send and receive E-mail using your ISP, see the
following section, entitled "Setup an ISP" on page 80.

Setup an ISP
Before you can send E-mail directly, you'll need to
configure the i730 to work through an existing account
with an Internet Service Provider (ISP) or your network at
work. To configure the i730 to work with an ISP:

1. Tap Start, and the select Settings.

2. Tap the Connections tab.

3. Tap the Connections icon, and select Add a new modem connection.

4. Enter a name of the connection, and select Cellular Line under Select a modem, then tap Next.

5. Enter the dial-up number for your ISP, then tap Next.

6. Enter the User name and Password for your account.

7. Tap Domain and enter the domain name for your account.

8. Tap Finish.

Section 8: Changing Your Settings

Topics Covered

• i730 Settings
• Button Settings
• Sound Settings
• Password Settings
• Phone Settings

This section explains how to either set or change
many of the settings available on your Samsung
SCH-i730.

i730 Settings
The Settings menus for your i730 allow you to configure
or change how many of your phone's features or functions
appear or work. Some of the settings on these menus are
associated with shortcuts or hotkeys on your phone and
can be quickly accessed for your convenience.

For example, the Today Screen has shortcuts for Owner
Information and Bluetooth connections, while the
Launcher Application, accessed by pressing the key,
displays shortcuts for Power and Screen settings.
Accordingly, some Settings available on the Personal,
System, and Connections tabs are discussed features are
presented in this manual.

Settings that are not easily associated with other
applications or features of your phone are discussed here.
They are not listed in a specific order; however, some
settings are grouped with topics that include them.

If you don't see a setting that you are looking for discussed
here, check the Index that begins on page 217, for a
complete listing of all settings for your phone.

Buttons Settings
The Buttons setting allows you to assign your favorite
programs to your phone's hardware buttons:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is highlighted.
3. Tap the Buttons icon.
4. Tap the Button assignment drop down box for each of the buttons listed below.
5. Tap OK to save and exit Buttons settings.

Button Assignments
There are four default button settings. The buttons include:

Button 1: Record
Button 2: Calender
Button 3: Contacts

Button 4: Context Menu
The following functions can be assigned to the buttons above:

• Context Menu
• Input Panel
• None
• OK/Close
• Rotate Screen
• Scroll Down
• Scroll Left
• Scroll Right
• Scroll Up
• Start Menu
• Today
• ActiveSync
• Calculator
• Calendar
• Contacts
• Downloads
• File Explorer
• Find
• Help
• Internet Explorer
• Jawbreaker
• Launcher
• Messaging
• MSN Messenger
• Notes
• OBEX FTP
• Phone
• Picsel Browser
• Pictures
• Pocket Excel
• Pocket Word
• Record
• Remote Control
• Ringtone Manager
• Solitaire
• Sprite Backup
• Tasks
• Terminal Services Client
• VoiceSignal
• Windows Media
• Wireless Sync

Sound Settings

PDA/Phone Ringer Volume
You can set the volume for both PDA notifications and
phone volume. To adjust these volumes, follow these steps:

1. Tap the Volume icon located at the top of your screen. A
menu displays with sliders to adjust both the PDA and
phone ringer volumes.

2. Using the stylus, tap the desired level on the slider
located under Volume. The left slider controls the PDA
volume and the right slider controls the ringer volume.

3. Tap the Volume icon again to exit.

Note: You can also press and hold the slider tab and move it back and
forth along the slider using the stylus.

WOW XT Audio Processing
WOW™ significantly enhances the quality of mono and
stereo audio, creating improved dynamics and bass
performance in your i730 internal speakers or optional
headphones when attached. WOW provides a panoramic
three-dimensional audio image that extends the sound in
both the horizontal and vertical planes well beyond the
speakers or headphones themselves. These enriching
effects are especially noticeable on digitally compressed
audio formats such as MP3 and WMA.

WOW is comprised of SRS®, TruBass® and Focus®
technologies, and adds the following features to your
audio listening experience.

• SRS - the leading 3D sound technology in the world, which
restores the spatial information that is masked by traditional
recording and playback techniques.

• TruBass - SRS technology that enhances bass performance by
utilizing psychoacoustic techniques to restore the perception of
low frequency tones, delivering deep rich bass to your i730
internal speakers or optional headphones.

• Focus - Elevates the sound image field to create the perception
of image height. When used in combination with SRS 3D, it
delivers an enlarged sound image while improving the clarity in
the high frequencies in your audio.

To enable WOW XT audio processing or to change the
settings for this feature, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings.

3. Tap the System tab.

4. Tap WOW XT Settings.

5. To enable WOW processing, tap the WOW icon. When
enabled, this icon is red and the other settings can be changed.

6. Select the Sound EQ mode from Normal, Classic, Jazz,
Rock, Pop, Dance, or Custom.

7. Using the stylus, tap the desired level for each effect you
want to change. You can set:

• SRS 3D Effect - This setting influences the width processing
performed on the audio signal. As you increase this effect, you
should perceive an increasing distance or separation between
the left and right channels.

• SRS Focus - This setting influences the brightness or amount
of treble in the audio signal. Increasing this setting enhances
vocals and dialog.

• SRS TruBass - This setting influences the amount of TruBass
processing performed on your audio signal.

Note: The Sound EQ setting value has changed to allow better sound
effects when an earjack is used. Since buffering is used, changes that are
made using this menu are real time. There can be as much as a one
second delay before you hear a change in the audio you are listening to.

8. To restore the default values, tap the Reset button at the top of the screen.

9. Tap OK to exit.

CarKit Volume
The CarKit Volume determines the volume settings for
voice and PDA ringers when your i730 is attached to the
optional hands-free kit installed in a vehicle.

Volume settings range from Silent to Loud. To set each
option for the optional CarKit, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings.

3. Tap the System tab.

4. Tap CarKit Volume.

5. Using the stylus, tap the desired level on the slider for
each of the volume settings available.

6. Tap OK to save your settings and exit.

Sounds and Notifications
The Sounds and Notifications settings allows you to select
the actions for which you hear sounds and to customize
how you notified when different events occur.

To view the sounds and notifications screen, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings.

3. Tap the Personal tab.

4. Tap Sounds & Notifications.

5. Select the check boxes for the events, programs, or notifications you want to enable on the Sounds tab.

Note: When you enable a sound, your i730 plays tones to notify you that an
event has occurred. See "Event Notifications" below for a complete list of
events for which you can select sounds.

6. Tap OK to exit.

Event Notifications
Event sounds can be set for each of the following events:

• ActiveSync: Begin sync
• ActiveSync: End sync
• Connection disconnected
• Connection established
• Messaging: New E-mail message
• Messaging: New text message
• MSN Messenger: Contact online
• MSN Messenger: New message
• Phone: Incoming call
• Phone: Missed call
• Phone: Voice mail
• Reminders
• Sync: Data received

To set an alert for an event, follow these steps:

1. Tap Start.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap Sounds & Notifications.
5. Tap the Notifications tab.
6. Select the event from the drop down menu.
7. Tap either Play sound or Vibrate.

Note: Use the Phone settings to change the ring type and tone settings of
your phone.

8. Tap the check box next to Play sound to designate a notification sound for that event.

9. Tap OK to exit.

Turn Phone Volume Off
You can turn the ringer off, or you can select one of the
other Ring tone options, such as Vibrate, Vibrate and ring,
or Vibrate then ring.

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings, then tap the Personal tab.

3. Tap Phone.

4. Tap the drop down arrow next to Ring type and select one of the Vibrate options or select None.

5. Tap OK to exit.

Password Setting
The password option allows you to enable or disable a
password. The available settings are:

• Simple 4-digit - Allows you to set a four digit password using the on-screen keypad.

• Strong alphanumeric - Allows you to enter a password that contains letters, numbers, or both.

When a password is configured, there is a "prompt if
device unused" option that allows a length of time range
from 0 minutes - 24 hours. When this option is set, you can
continue to use the i730 until the screen turns off due to
inactivity. If the device is inactive for a greater amount of
time than specified in this setting, a password must be
entered when you turn the device back on.

To set the password:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings.

3. Tap the Personal tab at the bottom of the display.

4. Tap the Password icon.

5. Tap the check box next to Prompt if device unused for.

6. Use the drop-down menu to select the amount of time
before you are prompted for a password when the i730 is idle.

7. Select either Simple 4 digit password or Strong alphanumeric password, depending on your preference.

8. Enter a 4 digit password or alphanumeric password in the text box next Password.

9. Tap OK. You're prompted to confirm the password change. Tap Yes to confirm or No to return to the previous screen.

Phone Settings
Phone options are divided into the following tabs:

• Phone - Allows you to configure a voicemail phone number.
View your existing phone number. Select the desired sounds
associated with the phone. Set notification for when Voice
privacy is unavailable.

• Option - Allows you to set Call Control options, Auto Answer mode, and set how the Time is updated.

• Alert - Allows you to turn on or off the Minute beep, Connect tone, and Disconnect tone.

• Service - Allows you to set the Data Mode and Roaming
Options. Select the GPS setting and your Voice Privacy level.

• Security - Allows you to restore the factory default settings for
your phone. Set Emergency Call numbers. Display the current
hardware and software version of the i730.

• SMS - Allows you to configure the SMS Call Back Number.

Phone Tab
These options allow you to configure several different
settings that are specific to the phone including:

• Changing the Voicemail Dialup Number
• System Sounds
• Keypad Tones
• Voice Privacy Notification

Phone Ringer Options
You can select several different phone ringer sounds for
the i730. You can also change the ring type and its tone, as
well as set an alert for when voice privacy is not available.
To access these settings:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings, then tap the Personal tab.

3. Tap the Phone icon. The Phone screen displays.

4. Tap the Ring type drop down arrow and select the ring type you want.

5. Tap the Ring tone drop down arrow and select the ringer sound you want.

Note: To hear the ring tone, use the player controls located to the right of
the Ring tone drop down box. Tap the arrow to play the tone, tap the square to stop.

6. Tap the check box next to Notify me when voice privacy is unavailable if you want to know this.

7. Tap OK to exit.

Tone Length
When dialing a phone number, tones are emitted each
time a key is tapped. These tones can be modified to be
short, long, or even turned off. In some cases, longer tone
lengths may be necessary to access automated systems
such as voicemail.

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap Phone.
4. Tap the Keypad drop down arrow and select:

• Short Tones - When the on-screen keypad for the phone is
tapped, a short tone is played.
• Long Tones - When the on-screen keypad for the phone is
tapped, a long tone is played.
• Off - No tones are played when the on-screen keyboard for the phone is tapped.

5. Tap OK to exit.

Voicemail Settings

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Phone icon.
4. The number to call your voicemail is displayed in the Voicemail box. To change the number, tap the box and enter the number you want.

Note: This number is automatically setup when you receive your phone.
You will probably not need to change it unless otherwise instructed by your carrier.

Option Tab
The option tab allows you to set call control options, the
auto answer mode, and to set how the internal clock is updated.

• Call Control - Allows you to set up how the phone is answered.
A call can be answered by moving the slider up and can be
ended or released by moving the slider down.

• Auto Answer (Carkit/Headset) - This option can be used with
the headset or the carkit accessory. When using the carkit, the
phone is automatically answered after 3, 5, or 10 seconds.

Note: Auto Answer is not supported for the Bluetooth wireless technology headset.

• Time Setting - The i730 can receive time information from the
cellular network you use. Select Auto to receive the time signal
from your phone's carrier or select Manual to set your phone's
time manually.

To access the option settings:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Phone icon.
4. Tap the Option tab.
5. Change the options you want, then tap OK to exit.

Alert Tab
The Alert tab allows you to set a notification sound when these events occur:

• Minute beep
• Connect tone
• Disconnect tone.

Select the options you want to enable, and then tap OK to exit.

Service Tab
The Service tab allow you to configure your phone to
receive an incoming data call, change your roaming
mode, and set your GPS and Voice Privacy preferences.

To access the service settings:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Phone icon.
4. Tap the Service tab.
5. Change or set the following options:

• Data Mode - Allows you to set your phone to receive a data call.
• Roaming - Allows you to select a desired roaming option. 
• GPS - Allows you to specify if your phone sends global
positioning information whenever you make a call, i.e. Location
On, or only when you make an emergency 911 call.
• Voice privacy - Allows you to select the level of encryption used
when making or receiving phone calls. Enhanced mode offers
more security but can be associated with network delay while
the advanced encryption is encoded or decoded.

6. Tap OK to exit.

Security Tab
The Security tab allows you to restore the factory default
settings for your phone, set emergency call numbers, or
display the current hardware and software version of your i730.

Caution: If you select the Phone Reset Button and confirm you want to
reset your phone, all of your phone settings and user installed applications
will be erased. You must enter your password before this can happen, but
all settings are restored to their factory setting when you perform this
operation.

The Emergency call feature provides you with three
numbers that you can assign and edit, as well as the three
911 emergency numbers, that can be called even when
your phone is in lock mode. Although the 911 numbers
appear in this list, they cannot be edited.

To access the options on this menu follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Phone icon, then select the Security tab.
4. Tap the button of the function you want. You can choose from the following:

• Phone Reset
• Emergency Call
• Version

Note: If you select either Phone Reset, you will be prompted to enter your
security password. By default this password is the last 4 digits of your
phone number unless you have changed it. For more information about
setting a password, see "Password Setting" on page 90.

5. Follow the directions to complete the function you selected, then tap OK to exit.

SMS Tab
The SMS tab allows you to configure the SMS Call Back Number. To access the options on this menu follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Phone icon, then select the SMS tab.
4. To change the SMS CallBack Number, tap the box and enter the number you want.
5. Tap OK to exit.

Section 9: Personal Digital Assistant

Topics Covered

• Your Personal Digital Assistant
• Picsel Browser
• Microsoft Pocket Applications
• Sprite Backup Utility
• Application Management
• Memory Adjustments

This section introduces applications included with
your phone. You can view different document
formats with the document viewing tool, access
word processing and spreadsheets documents, and
even instant message others using the preloaded
applications on your Samsung SCH-i730.

Your Personal Digital Assistant
The i730 is an integrated communication device with the
power of a mobile phone and the intelligence of a PC. The
i730 is loaded with familiar Microsoft(r) pocket
applications, like Pocket Outlook, Pocket Internet
Explorer, MSN® Messenger, Windows® Media™ Player
10 for Pocket PC, Pocket Word & Excel, and several
specialty applications.

Picsel Browser
Picsel Browser allows you to view documents on your
handset without converting files. The document display
environment brings new levels of satisfaction to your
browsing and document viewing experience by
supporting popular file formats from your desktop
environment in their native form without any conversion.

The interface also allows you to navigate your documents
by simply touching your stylus to the screen, and then
panning documents or zooming in or out to view every
detail of your documents.

Launching the Picsel Browser
To launch the Picsel Browser, follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Select Programs, then tap Picsel Browser. The browser displays.
3. To view the main menu, tap on the Picsel logo in the lower right of your screen to display the program's carousel.
4. Choose the function you want by selecting the appropriate icon.

Navigating Picsel Browser
To pan (or 'scroll') to a different part of the document,
simply stroke your pen across the screen in the direction
you would like the page to move. To pan the page up,
touch and hold your pen somewhere near the middle of
the screen and draw a line towards the top, then take your
pen off the screen. You can do this repeatedly so that you
can view any size of document.

Further, you can 'throw' the document across the screen, and
it will continue moving after you have released the pen. This gives
you time to start another stroke. This inertia can be used to save
time while you pan around the document.

You can also zoom the size of the document, so that more or less of
it is visible at a different size. The tap-and-stroke gesture for this is
to tap your pen briefly near the middle of the screen then
touch and hold it again in the same place (a "double-tap").
Now, stroke your pen up to zoom in, or down to zoom out.
Release your pen when you reach the scale you like. Using
this, you can view small print details on diagrams, or can
get an overview of a whole page.

There is a menu of options available for Picsel Browser by
tapping the icon in the bottom right corner of your screen.
Using the menu, you can open new documents, adjust the
screen, configure the settings for Picsel Browser, or exit
from the application. To find out what each option does,
press and hold your stylus on an icon to display a tool-tip
that explains the highlighted option.

Views
There are four main views in Picsel Browser that allow
you to choose the documents you want to view. These can
all be selected from the main browser menu.

Reflow Layout
The Reflow Layout allows you to see your documents.
You can pan (scroll) or zoom to read any part of a
document. You can also move between the pages of longer
documents by stroking your stylus along the bottom of
the screen, like turning the pages of a book. You can also
rotate the document view between landscape and portrait
format to suit your reading style.

Explore Directories
The Explore Directories allows you to explore documents
stored on your i730 or on the optional memory cards. You
can look inside folders for other documents, or you can
change the order and appearance of the lists using special
options on the menu.

View History
The View History records all of the documents you have
looked at in the past. You can use this to remember where
you've been or to return to the pages without finding an
individual file again. You can also adjust the amount of
time the history is recorded for, or delete everything from
it by using Preferences, which are described below.

View Bookmarks
The View Bookmarks allows you to keep track of your
favorite documents or web sites so that you can return to
them easily. You can add a document to this list using the
menu option in the Document View, or you can remove
them by using the options in this view.

Preferences
There are several options in Picsel Browser that you can
adjust according to your preferences. While most of them
are a matter of choice, such as the number of days after
which items are removed from the history list, some affect
proper operation of the application. For example, if you
need a "proxy" to access the Internet, you can select this in
the preferences from the main menu. Picsel Browser can
display documents in many other languages. Since
character encodings used to store text are not always
clearly identified in some documents, you can set the
preference for the default which will be used on
documents in your native language.

For more information, you can access Tool-tips, which are
icons located in the menus of each view. To view these, tap
and hold your stylus over any icon to display information
about the item you have selected.

Microsoft Pocket Applications

MSN Messenger
Log onto Microsoft MSN(r) Messenger and chat with
others right from your i730. Using wireless data provided
by your carrier, you can quickly send instant messages to
your list of online buddies, or interact with several people
at the same time. The chat window lets you read and write
messages, and notifications alert you if others are trying to
get in touch. "My Text" lets you store and recall frequently
used messages so you can respond without composing a
reply.

MSN Messenger is a MSN Passport service and requires
a Passport, Hotmail®, or MSN account.

Login to MSN Messenger

1. Tap Start located in the upper left corner of the screen.

2. Select Programs.

3. Tap MSN Messenger. The MSN Messenger sign in
screen appears in the display.

4. Tap in the center of the display to sign in.

5. Enter your Sign in name from your Passport, Hotmail, or MSN account.

6. Tap the Password field, then enter the password from
your Passport, Hotmail, or MSN account. Use the
password for the account entered in the Sign in field.

7. Tap the empty box next to Save password if you want
the password entered automatically the next time you sign in.

8. Press Sign In to log in to MSN Messenger, or tap Cancel
to return to the previous menu.

Add a Buddy to Your Contact List
A buddy is another MSN Messenger user who shares
similar interests. MSN Messenger automatically notifies
a buddy when the other is online.

1. Once you've logged in to MSN Messenger, tap Tools.
2. Tap Add a Contact, then enter the E-mail address of the buddy you wish to add to your contact list.

Note: Only valid Passport, Hotmail(r), or MSN accounts can be added to
your contact list.

3. Tap Next.
An instant message is sent to the E-mail address of the
buddy you've added notifying them that you've added
them to your contact list. They are given the opportunity
to accept your request or block further requests. A
message appears in your Pocket PC display that confirms
or denies the request.

4. Tap OK when finished.

5. Your buddy's E-mail address appears under Online or Not Online in the display, depending on their status.

Start a Chat Session
You can chat with another person if they're online and
you'll both receive your responses in "real time," which
means that there is very little delay. You can even join
more than one chat at the same time.

1. Once you've logged in to MSN Messenger, tap and
highlight the buddy that is online.

2. Enter the text of your conversation using the desired
method of input, then tap Send.

3. If your buddy is online, they will hear a tone and a
dialogue box appears in the display of their device.

4. When your buddy responds, you'll receive their response
almost immediately.

Invite Others to Chat
If you're involved in more than one chat session at a time,
you can invite people from other chat sessions to join you
in another session.

1. While in a chat session in which you want to invite
others, tap Tools. A pop-up menu displays.

2. Tap Invite. A list of users from other chats you are
involved in displays.

3. Tap and highlight a user in the list that you want to invite.

4. To invite multiple users, repeat steps 1 through 3 as many times as necessary.

View Chat Members
To view the list of members in a chat session:

1. While in a chat, tap Tools. A pop-up menu appears in the display.

2. Tap Chat Members. The buddy list of members involved
in the chat session appear in the display.

3. Tap OK to return to the chat screen.

End a Chat Session

1. While in a chat session, tap OK.

2. You are returned to the buddy screen.

Block a Contact
Once you block a contact, the blocked contact can't see
you online. This works both ways; you can't send a
message to a blocked contact, although you can see if they are online.

1. At the buddy screen, tap Tools. A pop-up menu displays.

2. Tap Options, then select the Privacy tab.

3. To add a buddy to the My Block List, tap and highlight the name you want in My Allow List, and then press double right to move the name over.

4. Tap OK. You're returned to the buddy screen.

Unblock a Contact

1. At the buddy screen, tap Tools. A pop-up menu displays.

2. Tap Options, then select the Privacy tab.

3. To move a buddy back to the My Allow List, tap and
highlight the name you want in My Block List, and then
press double left to move the name over.

4. Tap OK. You're returned to the buddy screen.

Sign out of MSN Messenger

1. At the buddy screen, tap Tools.
2. Tap to highlight Sign Out. You're returned to the MSN Messenger main screen.

Note: If the session does not end, tap in the title bar, and then tap Disconnect. If you want to suspend and resume the session later, press the End key.

Pocket Internet Explorer
You can use Internet Explorer to view web pages on your
i730 in two different ways:

• By downloading pages and then performing an ActiveSync operation.
• By connecting to the Internet Directly via your wireless data connection.

While browsing you can also download new files and programs.

Launch Internet Explorer

1. Tap Start located in the upper left corner of the screen.
2. Tap Internet Explorer.

Note: Microsoft Pocket IE does not support all browser functions supported by PC IE; therefore, browser functions might not work in some internet sites.

Save Favorites
When you find a web page that contains useful or interesting information, it can be saved as a favorite.

1. Tap Start located in the upper left corner of the screen.
2. Tap Internet Explorer.
3. Navigate to the desired website.
4. Tap the yellow star icon in the command bar.
5. Tap the Add/Delete tab.
6. Select the desired folder and tap Add.
7. Tap Add again.
8. Tap OK to save and exit.

Internet Pass Through
Your i730 can use a desktop's/laptop's Internet access
when connected to it. Using Internet pass through, your
i730 displays online content with Pocket Internet Explorer.

1. Connect the i730 to your desktop/laptop machine and perform an ActiveSync operation.
2. Tap Start located in the upper left corner of the screen.
3. Tap Internet Explorer.

Pocket Word
Pocket Word works with Microsoft Word on your
computer to give you easy access to copies of your
documents. You can create new documents or copy
documents from your computer to your i730. Synchronize the documents between your computer and your i730 to insure you have the most up-to-date content in both locations.

Use Pocket Word to create documents, such as letters, meeting minutes, and trip reports.

Create a New Document

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap New.

Note: If this is the first document being created, you will automatically be
in a new document screen.

5. Enter text using the desired character input method.
6. When finished, tap to save and exit.

You can open one document at a time. If you try to open
a second document, you are asked to save the first
document. You can save a document in any one of the
following formats:

• Pocket Word Document (*.psw)
• Rich Text Document (*.rtf)
• Plain Text Document (*.txt).
• Word 97/2000 Document (*.doc)
• Word 97/2000 Template (*.dot)

Attach a Recording
You can attach a recording to a word document using the
Record option. To attach a recording to an existing document:

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Select the desired document form the list.
5. Tap View and select Recording.
6. Tap Record to start recording.
7. When finished, tap Stop.
8. Tap OK to save and exit.

Pocket Word Options
The following options are available in Pocket Word:

• Default template - Allows you to select Blank Document,
Meeting Notes, Memo, Phone Memo, and To Do as the default document.
• Save to - Allows you to select Main memory or a SafeStore as
the default document storage location.
• Display in list view - Allows you to display Pocket Word only,
Pocket Word & Text, and Known types in the document list view.

Access Pocket Word options

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap Tools and select Options.

Delete a Document
To delete a Pocket Word document:

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap and hold the document you want to delete. A pop-up menu displays.
5. Tap Delete. A confirmation window displays.
6. Tap Yes to delete the file.

Beam a Document via IR
To beam a document to another Pocket PC user:

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap and hold the document you want to beam. A pop-up menu displays.
5. Tap Beam File.
6. Align the IR ports to beam the file to another user.
7. Tap OK when you are finished.

Pocket Excel
Pocket Excel works with Microsoft Excel on your
computer to give you easy access to copies of your
workbooks. You can create new workbooks or copy
workbooks from your computer to your i730.
Synchronize workbooks between your computer and
your i730 to insure that you have the most up-to-date
content in both locations. Pocket Excel also provides
fundamental spreadsheet tools, such as formulas,
functions, sorting, and filtering.

Create a New Workbook

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Excel.
4. Tap New.
5. Enter text using the desired character input method.
6. When finished, tap OK to save and exit.

Note: You can open one workbook at a time. If you try to open a second,
you are asked to save the first workbook.

Delete a Workbook

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Excel.
4. Tap and hold the workbook you want to delete. A pop-up menu displays.
5. Tap Delete.
6. Tap Yes to confirm the deletion.

Beam a Workbook via IR

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Excel.
4. Tap and hold the workbook you want to beam. A pop-up menu displays.
5. Tap Beam File and align the IR ports.
6. Tap OK when finished to exit the IR screen.

Dormant Mode
With your i730 you can seamlessly transition to a voice
call and then resume your data connection after your call
ends using Dormant mode. Dormant mode allows you to
maintain data connections so you can easily continue to
instant message, download email, or browse the Web
after receiving a call.

There are two communication protocols used to
exchange data in a wireless network, 1X and EVDO. Your
i730 supports both protocols; however, certain features,
such as Dormant Mode, are only available in areas
supporting the high-speed 1X and EVDO data protocol
and are not available if the area in which your are using
your phone uses the 2G data protocol.

When you launch MSN Messenger or Pocket Internet
Explorer, your i730 establishes a data session so you can
send and receive information while using these
programs. When an active data session is established, you
will see the data session icon at the top of your screen.

To suspend your data session and resume it later, tap the
Session icon. The message, "Data session now dormant"
displays.

The inactive icon appears in the title bar, which
indicates the Dormant mode is active. To cancel Dormant
mode and resume your data session, select the application
you were previously using.

Windows Media Player(r)
Use Microsoft Windows Media Player for Pocket PC to
play digital audio and video files that are stored on your
device or downloaded from the web. You can play files in
either Windows Media or MP3 format, including files
with extensions .asf, .wma, .wmv, and .mp3.

Launch Media Player

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Windows Media.

Load Media Player files
Media player files must be copied to the i730 using the
ActiveSync application. The files are copied to the Local
Content folder on the i730 after the ActiveSync operation.
To load a file:

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Windows Media.
4. Tap Menu, then tap Library.
5. Tap My Playlists.
6. Select the desired file from the list and tap OK.
7. Tap Play to play the file.

Media Player Controls
The following settings are available in the media player:

Slider Control
Full Screen Option
Opens URL
Skips to Beginning
Play/Stop
Skips to Next File
Volume Controls
Mute On/Off

• Tap the Play icon to listen to a file. The Play icon turns into the
Pause icon once the file begins playing.
• This slider control adjusts the playback progress of the selected
file and appears above the play, pause, and skip buttons.
• The volume controls adjust the sound level during playback.
• Tap the mute control to toggle between mute on and off.

Playlist
Windows Media player allows you to configure personal
playlists with your favorite music or video files. Playlists
group media content and store the location of media
content, whether the location is your computer, a
network, or the Internet. Playlists typically have an .asx or
.m3u file extension.

1. Launch the Windows Media player application.

2. Tap Menu, then Library.

3. Tap My Playlists.

4. Enter a name for the playlist and tap OK.

5. Tap Menu at the bottom of the screen to open a browse window.

6. Tap the check box next to each supported media file to add it to the new playlist. Tap OK when finished.

Sprite Backup Utility
Sprite Backup helps you protect the data on your Pocket
PC from data loss due to hardware failure, drained
battery or accidental deletion. Use Sprite Backup to create
a backup copy of your Pocket PC's data to a safe location.
If data on your Pocket PC is accidentally erased or
overwritten or the battery time expires, you can easily
restore the data from a backup copy.

Basic Mode and Advanced Mode
Sprite Backup has two modes, Basic and Advanced. The
first time you run Sprite Backup, it is in Basic Mode. To
switch between the modes, select Options at the bottom of
your screen, then select Switch to Advanced Mode or
Switch to Basic Mode.

Basic Mode
Basic Mode is the default mode with an easy to use
interface for making a backup with the minimum of effort.
The Basic Mode screen displays the date and time that
your last backup was created and allows you to backup
your entire Pocket PC with the tap of a button.

Advanced Mode
Advanced Mode allows you to select the data you want
backed up, schedule regular backups, and enable
automatic backup when your battery is low. You can also
enable encryption and compression, and enable the
automatic maintenance of existing backup files.

To access the Sprite Backup Utility, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Select Programs.

3. Tap Sprite Backup.

4. Tap Backup Now to perform a backup in Basic Mode,
or tap Options, and then select Switch to Advanced
Mode to select specific files or backup features.

For more information about using the Sprite Backup
Utility, launch Sprite and then tap the Windows icon
in the upper left corner of your screen. Select Help from
the drop down menu and follow the prompts.

Application Management
Your i730 is powered by Windows Mobile™ 2003
Software for Pocket PC Phone Edition, which allows
installation and removal any Pocket PC 2003 compatible
application on your device. Pocket PC applications can be
downloaded from the web, purchased at retail outlets, or
beamed from a friend using the IR feature.

Install New Applications
When a new application is downloaded from the web or
installed using a CD, the files are transferred to the mobile
device via ActiveSync. ActiveSync checks if enough
memory is available before installing a program. To free
up memory, simply remove old programs or delete
unused files.

Delete an Application
Some applications are large and take up space on your
i730. To help manage space and memory requirements for
other software that may need to be installed, you can
delete any application not required for your device to
operate correctly. To delete an application:

1. Tap Start located in the upper left corner of the screen.
2. Select Settings.
3. Tap the System tab.
4. Tap Remove Programs at the bottom of the screen.
5. Select the program from the list and tap Remove.

Memory Adjustments
Memory is managed automatically, but it can be adjusted
using the memory slider. Memory is allocated to storage
and programs. Usually the amount is equally divided;
however, you can adjust one or the other to install or use
an application with more memory requirements.

1. Tap Start located in the upper left corner of the screen.
2. Select Settings.
3. Tap the System tab.
4. Tap Memory.
5. Tap and hold the slider left or right to allocate the
desired memory amounts.
6. Tap OK to save and exit.

Memory Card
The memory card can be used to backup or save data to
avoid accidental loss due to battery discharge or other
unforeseen device data complications. The memory
storage card is inserted into the slot located on the side of
the unit. Once installed, the storage card is displayed on
the i730. When checking the memory allocation as
outlined above, the storage card can be selected to get an
accurate available memory setting.

The SafeStore option allows you to backup and protect up
to 86.39 megabytes of data using the backup utility.

Section 10: Personal Organizer

Topics Covered

• Today Screen
• Calendar
• Task List
• New Command
• Notes
• Alarm
• Calculator
• Active Sync

The topics covered in this section allow you to
schedule appointments, view the calendar, create
Task lists, set an alarm, perform simple math
calculations, and setup up your phone so you can
synchronize your files and folders with your
desktop PC.

Today Screen
The Today screen is used as a default information screen
on the Pocket PC. When the i730 is turned on, the Today
screen is displayed. The today screen displays the
following information on the screen:

• Current Date and Time
• Owner Information
• Message Status
• Current Tasks
• Current Appointments
• Bluetooth Status
• Wi-Fi Status

Date and Time Settings
Clock settings can be accessed from the Today screen by
tapping the clock icon next to the day and date entry on the
screen. Clock settings allow you to set the time zone, time,
and date for your home or visiting location.

1. From the Today screen, tap the clock icon .
2. Select either Home or Visiting.
3. Set the time zone using the drop down arrow.
4. Tap the up or down arrow to set the correct time.
5. Tap the drop down arrow to set the correct date.
6. Tap OK to save and exit.

Note: The time on the i730 handset does not automatically change when
you travel to another time zone. To ensure that you don't miss any
appointments, you must change your clock setting to Visiting and then
select the appropriate time zone.

Owner Information
Owner Information is where you can store information on
the owner or user of the device. Name, Company,
Address, Telephone, E-mail, and Notes information fields
are available.

1. From the Today screen, use the stylus and select "Tap here to set owner information".

2. Tap the Name box in the Owner Information screen.

3. Use the stylus to tap the correct letters and spaces using
the on-screen keyboard. (To select the keyboard, tap the
up arrow located in the lower right corner of the screen
and select Keyboard up.)

4. Tap the other desired information boxes and enter the
information using the stylus and on-screen keyboard.

5. When you are finished entering all the desired
information, tap OK in the upper right corner of the
screen.

Message/Task Status
The Today screen displays the status messages you have
received and of the next or current task scheduled. You
can view you Inbox or the Task List by tapping on the
status lines. 

Current Appointments
To view the next upcoming appointment and battery
indicator without launching the calendar or today screen:

1. Tap the time in the upper right corner of the screen.
2. The Time and Next Appointment screen is displayed.

Bluetooth Status
The Bluetooth Status indicators on the Today screen let
you know if Bluetooth is turned on. The profile icons
indicate when one of the Bluetooth connections is active.
When Bluetooth is Off the Bluetooth icon is grayed out.

If you tap the Bluetooth icon, the icon appears blue and
On displays next to the profile icons. When a profile is
active, its icon is highlighted, which indicates that data is
being exchanged between your phone and another
Bluetooth device.

Calendar
The calendar allows you to create appointments and
reminders for the day, week, month, or year.

Schedule an Appointment
An entry in the calendar is called an appointment or
reminder. When you schedule an entry, a description is
displayed on the time line, and the duration is set to 1 hour
by default. You can easily change the start time and
duration for any event. You can schedule the following
types of events in the calendar:

• Timed appointments, such as birthdays and meetings, which
have a specific date, start, and end time.

• Untimed reminders, such as holidays, and anniversaries. These
occur on a particular date but have no specific start or end
times; they appear at the top of the list of times in a shaded
area. You can schedule more than one untimed event on the
same date.

• Repeating appointments, such as a weekly meeting that is held
on the same day at the same time each week.

• Continuous appointments, such as a vacation or three-day
conference.

• All day events, which reflect the default length of the day as set
by the user.

Schedule a Timed Appointment
You can schedule timed appointments for the current date
or for future dates.

To schedule a timed appointment for the current date:

1. Press the Calendar button on your phone to open
the calendar to the current schedule.

2. Tap New.

3. Enter the Subject of the appointment or tap the drop
down arrow and select a preset subject.

4. Enter the Location if necessary.

5. Tap the drop down arrow next to the Starts and select
the desired starting time of the appointment.

6. Tap the drop down arrow next to the Ends and select the
desired ending time for the appointment.

7. Select Yes or No in the All Day setting.

Note: If Yes is selected in All Day the time is automatically removed in the
start and end times to indicate that there is no time limit.

8. Tap the Occurs box to select the frequency.

9. Tap the Reminder box and select either None or
Remind Me. If Remind Me was selected, enter the
amount of time before you are reminded.

10. Tap Categories and select either Business, Holiday,
Personal, or Miscellaneous. You can also add or delete
categories with the Add/Delete tab. Tap OK when finished.

11. Tap the Attendees box to invite others to the
appointment from your contacts. Contacts must have
an E-mail address to be added as an attendee.

12. Tap the Status box and select Free, Tentative, Busy, or
Out of Office.

13. Tap the Sensitivity box and select either Normal or
Private.

14. Tap OK to save the new appointment.

Change the Calendar view
You can change your calendar view to the following:

• Agenda - Displays a list of the current days appointments.
• Day - Displays the day with times and any appointments.
• Week - Displays the week.
• Month - Displays the month.
• Year - Displays the year.

To change the view of the calendar, follow these steps:

1. Press the Calendar button on your phone to open
the calendar.
2. Tap the row of calendar icons located on the bottom of
the screen to switch to the desired view.

Calendar Options
Calendar Options allow you to select what day of the
week your calendar starts upon, whether you view a 5-
day, 6-day, or 7-day week, options for reminders, and more.

1. Press the Calendar button on your phone to open
the calendar.

2. Tap Tools and select Options.

3. Tap 1st day of week to select the day that you want the
calendar to start on, either Sunday or Monday.

4. Tap Week view to select from a 5-day, 6-day, or 7-day week.

5. To display half hour slots when you view your calendar,
tap the empty box to the left of Show half hour slots.

6. To show the number of the week in your calendar, tap
the empty box to the left of Show week numbers.

7. To set reminders for new calendar items, tap the
Appointments tab, then tap the empty box to the left of
Set reminders for new items.

8. Select the reminder time in the drop down boxes
beneath Set reminders for new items.

9. Tap the icons that you wish to display in the calendar.

10. Select Outlook E-Mail or Text Messages as the default
method for sending meeting requests in the drop down
box labeled Send meeting requests via.

11. Tap OK to save your settings and return to the calendar.

Tasks List
A task is something that needs to be done in a certain
amount of time and requires a reminder once the deadline
has been reached. Once a task is complete, it can be
checked off and another task can be started. A task list can
be set up to keep track of tasks. Tasks can also be
prioritized, so that higher priority items are finished first.

Create a new Task

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Tap Tasks.
3. Tap New.
4. Enter a Subject. You can also tap the drop down arrow to select a default subject.
5. Tap the Priority box and select:

• High
• Normal
• Low

6. Tap the Status box, the select completion status.
7. Tap the Starts box and enter the starting date.
8. Tap the Due box and enter the ending date.
9. Tap the Occurs box and select how often the task occurs.
10. If you would like a reminder of when the task is due, tap
the Reminder box and select Remind me.
11. Tap the Categories box and select Business, Holiday, or
Personal. Tap OK.
12. Tap the Sensitivity box and select Normal or Private.
13. Tap OK to save the task.

When the task is saved, it is added to the task list. The task
list allows you to sort the tasks based on priority level,
subject, start date, due date, or status.

Mark a Task complete
When a task is completed, a check is used to indicate the
item is done.

1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Locate the desired task from the list and tap the check
box located to the left of the task entry.

Task Options
The following task options are available in the task list:

• Set reminders for new items - If this option is selected, an alert
is automatically created when a new task is created.
• Show start and due dates - If this option is selected, the start
and due date is displayed in the task list.

Access Task Options

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Select Tasks.
3. Tap Tools and select Options.

The Task Entry Bar
The task entry bar option automatically places a bar at the
top of the screen to allow you to create a new task without
navigating through the menu. You simply tap the bar and
enter a name to create a new task. This option does not put
in any start or end times. To enter any additional
information you need to edit the task.

Activate the Entry Bar

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Select Tasks.
3. Tap Tools and select Entry Bar.

Edit a Task
To edit a task:

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Select Tasks.
3. Select the desired task from the task list.
4. Tap Edit.
5. When finished, tap OK to save and exit.

Beam a Task via IR
You can beam a task to another Pocket PC using the IR
port. This operation requires that both users have the
Pocket PC software. To beam a task:

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Select Tasks.
3. Select the desired task to beam.
4. Tap Tools and select Beam Task.
5. When the task is successfully transferred, OK appears in the display.

Add a Note to a Task

1. Tap Start located in the upper left corner of the screen.
2. Select Tasks.
3. Select the desired task from the task list.
4. Tap Edit.
5. Tap the Notes tab.
6. When finished adding the note, tap OK to save and exit.

Delete a Task

1. Tap Start located in the upper left corner of the screen and select Programs.
2. Select Tasks.
3. Select the desired task from the task list.
4. Tap Tools and select Delete Task.
5. Tap Yes to confirm the deletion.

New Command
The New command located in the bottom left side of the
screen allows you to create a new:

• Appointment
• Contact
• Excel Workbook
• Message
• Note
• Task
• Word Document

To access the New command:

1. Tap New located in the bottom left corner of the screen.
2. Select any of the choices to launch the application.

Notes
Quickly capture thoughts, reminders, ideas, drawings,
and phone numbers with Notes. Notes can be attached to
contacts, appointments, messages, and tasks. Notes can
be either recorded or written.

Record a Note

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs, then tap Notes.
3. Tap New.
4. Tap the recording icon.
5. Tap Record to start recording, and then tap Stop to stop.

Record a Quick Note

When you are located in the Notes application, you can
press and hold Quick Note key located on the Voice Memo key on the
side of your phone to begin recording quickly. When you
release the button, the recording stops and the new note is
displayed in the notes list.

Record Yourself During a Call
During a call you can record yourself speaking to another
caller, so you can save directions or a phone number.

Note: You can only record your voice and not the other caller using this feature.

To record:

1. Make a call to the desired person.
2. During the conversation, press and hold Quick Note key located
on the Voice Memo key on the side of your phone to
begin recording.
3. When finished, release the Quick Note key to stop recording.
4. End the call.

Note: The call needs to be disconnected to listen to the recording. If the
call is still connected, there is no audio.

5. To listen to the recording, tap the entry from the notes list.

Write a Note

1. Tap New in the lower left hand corner of the screen.

2. Tap the writing icon. This is the default choice.

3. Select the character input method by tapping the arrow
in the right bottom corner.

4. Compose your note, then tap OK when finished.

Delete a Note

1. Tap Start located in the upper left corner of the screen.

2. Tap Programs, then tap Notes.

3. Tap the note you want to delete from the list of notes displayed.

4. Tap Tools and select Delete Note.

5. Tap Yes to confirm the deletion.

Note: You can also tap and hold the note in the notes list, then select Delete
from the pop-up menu.

Note Options
The following options are available for Notes:

• Default mode - This option allows you to select a default mode
of Writing or Typing.
• Default template - Allows you to select Blank Note, Meeting
Notes, Memo, Phone Memo, or To Do as the default note.
• Save to - Allows you to select Main memory or a SafeStore as
the default note storage location.

To access the note options, follow these steps:

1. Select Notes.
2. Tap Tools and select Options.

Alarm

Schedule an Alarm
Your phone has four alarm clocks that can be configured
to ring daily at a desired time. To set up the alarm clock:

1. From the Today screen, tap the clock icon.
2. Tap the Alarms tab.
3. Tap the box next to the desired alarm.
4. Tap the day of the week.
5. Tap the time to display the time settings. Tap the up or down arrows to select the desired time.

Note: Tap the AM or PM to cycle between them.

6. Tap OK when finished, and then tap OK again to save and exit.

Calculator
The calculator allows you to perform general
mathematical functions, such as addition, subtraction,
multiplication, and division. You can use the calculator to
perform basic calculations, store and retrieve values, and
display the last series of calculations.

Using the Calculator

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs, then tap Calculator.
3. Tap the numbers and functions you want.
4. When finished, tap X to exit.

ActiveSync ®
Microsoft ActiveSync synchronizes data between your
PC and the i730. ActiveSync is already installed on the
i730, but needs to be installed on your PC before you can
synchronize data.

System Requirements
Your computer needs the following software and
hardware to use ActiveSync:

• Microsoft Windows XP, Windows 2000, Windows Millennium
Edition, Windows NT Workstation 4.0 with SP6 or later.

• Microsoft Internet Explorer 4.01 SP1 or later

• Hard-disk drive with 12 to 65 MB of available hard-disk space
(actual requirements will vary based on selection of features
and user's current system configuration)

• Infrared port or USB port (available for Windows 98, Windows
Me, Windows 2000, and Windows XP only)

• A CD-ROM drive

• VGA graphics card or compatible video graphics adapter at 256
color or later

Install ActiveSync

1. Place the CD in the drive and wait for the Installation
window to appear in the display.
2. Select the Start Here tab.
3. Click the Install ActiveSync 3.7 menu selection.
4. Click Install and follow the onscreen instructions.

Connect the Cradle

1. Connect the USB connector from the i730 cradle to an
available USB port on your PC.

2. Plug the AC adapter for the cradle into a standard 120
VAC wall outlet.

3. Insert the i730 into the cradle, bottom end first.
ActiveSync detects the i730 and you're prompted to
setup a partnership.

Setup a Partnership
After you've installed ActiveSync, connected the desktop
cradle to your PC, and inserted the i730 into the cradle,
you're prompted to setup a partnership. There are two
types of partnerships Standard Partnership and Guest
Partnership.

A Standard Partnership synchronizes data between your
i730 and PC. Synchronization ensures that all relevant data
is updated, and is the best method for using your i730 along
with your PC to keep files up to date and stay connected.

A Guest Partnership simply transfers files between your
i730 and PC.

1. Select the desired partnership and click Next.
2. Select how you want to synchronize data and click Next.
3. Enter a unique name for your device and click Next.
4. Select or deselect the desired applications that you wish to synchronize, then click Next.
5. Click Finish.

The i730 and the PC should perform the first ActiveSync.
This may take some time, depending on the amount of
information that needs to be synchronized.

ActiveSync via IR
If you need to use ActiveSync and don't have a cable, you
can use the IR port.

1. On the PC, launch the ActiveSync application.

2. Click File and select Connection Settings.

3. Click the check box next to Allow serial cable or infrared connection to this COM port.

4. Click the drop down arrow and select Infrared Port (IR).

5. Click OK to close the window.

6. On the i730, tap Start located in the upper left corner of the screen.

7. Tap ActiveSync.

8. Tap Tools and select Connect via IR.

9. Aim the two devices at one another.

Section 11: Network Services

Topics Covered

• Call Forwarding
• Call Waiting
• Caller ID

This section allows you to set up the network functions
supported by your carrier. Some of these services may
not be available due to coverage area or service plans. If
you have any questions, please contact your service provider.

Call Forwarding
Call Forwarding allows you to forward all your incoming
calls to another phone number, even when your phone is
turned off.

To activate call forwarding, follow these steps:

1. Tap Star key, 7 key, 2 key.
2. Enter the area code and phone number where the incoming calls are forwarded.
3. Tap Talk key. A confirmation recording confirms the feature change.

To deactivate call forwarding, to the following:

Tap Star key, 7 key, 2 key, 0 key, Talk key. A confirmation
recording confirms the feature change.

Three-way Calling
Three way calling allows you to talk to two different
people at the same time. When using this feature, normal
airtime rates apply for each of the two calls.

To use three way calling:

1. Enter the number you wish to call and tap Talk key.
2. During the conversation, tap Talk key.
3. Dial the second person and tap Talk key.
4. When the person answers, tap Talk key again to connect all three parties.

If one of the people you called hangs up, you and the
remaining caller stay connected. If you initiated the call
and are the first one to hang up, all three calls are disconnected.

Call Waiting
You can answer an incoming call while on an existing call.
If you are on an existing call and another call is received,
a tone is heard and a call waiting message is displayed on
the screen. If the caller is stored in the address book, their
name is also displayed.

Answering a waiting call

1. Tap the Answer button. The phone connects to the other call while placing the existing caller on hold.
2. Tap the Talk key button again to switch back over to the original caller.

Caller ID
Caller ID alerts you to who's calling by displaying the
phone number of the person calling when you receive an
incoming call. Similarly, if you call someone who has this
feature, your phone number displays on their phone. If
the caller's name and number are already stored in your
Internal Phone Book, the corresponding name appears
with the number.

To block caller ID from displaying when you call another user, tap Star key, 6 key, 7 key and then dial the phone number.

Section 12: Bluetooth and Wi-Fi Services

Topics Covered

• About Bluetooth Wireless Technology
• Bluetooth Service Profiles & Modes
• Bluetooth Bonds
• Beaming Using Bluetooth
• About Wi-Fi
• Enabling Wi-Fi
• Automatically Connect to a Network
• Manually Enter Network Settings
• Changing Connection Information

This section explains the Bluetooth wireless
technology and Wireless Fidelity (Wi-Fi) features
available with your Samsung SCH-i730, as well as
certain connection related details necessary for
configuring your phone to work with these services.

About Bluetooth Wireless Technology
Bluetooth wireless technology provides short range
wireless communication exchange over a distance of
about 30 feet without requiring a physical connection.

Unlike infrared, you don't need to line up the devices to
beam information using Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in different rooms.

Your i730 allows you to beam files, appointments, tasks,
and contact cards between common devices or you can
use Bluetooth wireless technology enabled peripherals to
integrate with your device.

Bluetooth Service Profiles
Actually, the Bluetooth wireless technology specification
is a protocol that describes how the short-range wireless
technology works, whereas individual profiles describe
the services supported by individual devices like your
i730. Profiles reduce the chance that different devices will
not work together.

Your i730 supports the following profile services:

• SDAP (Service Discovery Application Profile)
• FTP (File Transfer profile)
• GAP (Generic Access profile)
• HFP (Hands Free profile)
• HSP (Headset profile - Note: stereo headset profile not supported)
• HID (Human Interface Device Profile - Bluetooth keyboard only)
• OBEX (Object Exchange profile)
• OPP (Object Push profile)
• SPP (Serial Port profile)
• ActiveSync (Uses SPP to connect to ActiveSync on a computer)

Bluetooth Modes
Bluetooth operates in two modes:

On/Off Mode
When the Bluetooth radio is turned on, you can use the
Bluetooth wireless technology features available in the
i730. When the Bluetooth radio is turned off, you cannot
send or receive information via Bluetooth. To save battery
life or in situations where radio use is prohibited, such as
airline traveling, you can turn off Bluetooth wireless
technology in your i730.

Turning Bluetooth On/Off

1. Tap Start in the upper left hand portion of your screen.
2. Tap Settings, and then select the Connections tab.
3. Tap Bluetooth.
4. Select or clear the "Turn on Bluetooth" check box. The Bluetooth radio is turned on or off depending on your selection.
5. Tap OK to return to the Connections tab.


Note: You can tap the Bluetooth icon on your Today screen to quickly turn
Bluetooth on and off. Bluetooth wireless technology turns off when your phone is off.

Discoverable Mode
When your i730 is discoverable, other devices will
automatically detect it while searching for compatible
Bluetooth wireless technology enabled devices with
which to connect. Your phone must be on and you have to
turn on the embedded Bluetooth radio.

When the discoverable mode is active, a message displays
when another device attempts to establish a bond or
connect with your phone. You must accept the incoming
beam to exchange data or information with other
compatible Bluetooth wireless technology enabled devices.

Making your i730 Discoverable
To set your phone to be discoverable by other devices, follow these steps:

1. Tap Start in the upper left hand portion of your screen.
2. Tap Settings, and then select the Connections tab.
3. Tap Bluetooth.
4. Select the "Turn on Bluetooth" check box, and then
select the "Make this device discoverable to other devices" check box.

Other common devices can now detect your device and
attempt to beam information to it, establish a
connection, or use a Bluetooth service.

Note: If you do not want your i730 to be discoverable, clear the "Make this
device discoverable to other devices" check box.

Bluetooth Bonds
A bond is a relationship that you create between your i730
and another Bluetooth wireless technology enabled
device to exchange information in a secure manner.
Creating a bond involves entering the same Passkey on
the two devices sharing a bond. Once a bond is created
between devices, the devices do not have to be
discoverable to exchange information; however, each
device must have its Bluetooth radio on.

Bonds are created only once between devices. Once a
bond is created, devices can exchange information as soon
the bond is recognized, eliminating the need to discover
one another or to enter security features like a common Passkey.

Creating Bluetooth Bonds
You can create a bond between your device and another
device that has Bluetooth wireless technology. Once you
do this, Bluetooth doesn't need to be in discoverable mode
in order for you to beam information between the two
devices; the Bluetooth radio only needs to be turned on.

To create a Bluetooth bond, follow these steps:

1. Make sure that the two devices are within range of one
another and that Bluetooth discoverable mode is enabled
on both devices.

2. Tap Start in the upper left hand portion of your screen.

3. Tap Settings, and then select the Connections tab.

4. Tap Bluetooth, and then select the Devices tab.

5. Tap New. Your device searches for other Bluetooth wireless technology enabled devices and displays them in the list.

6. Tap the name of the other device you want, and then tap Next.

7. Enter a Passkey, which should be between 1 and 16 characters, and tap Next.

Note: You must enter the same Passkey on both devices.

8. Change the name of the device associated with the bond, if desired, and then tap Finish.

Accept a Bond
To accept an incoming bond, follow these steps:

1. Make sure that Bluetooth is turned on and the device is
discoverable.

2. When prompted to bond with the other device, tap Yes.

3. Enter a Passkey, which should be between 1 and 16
characters and must match the Passkey entered on the
originating device.

4. Tap Next.

5. Change the name of the device associated with the
bond, if desired, and then tap Finish.

Rename a Bond
The name of each bond can be changed, if necessary, by following these steps:

1. Make sure that the two devices are within range and
that Bluetooth is discoverable on both devices.

2. Tap Start in the upper left hand portion of your screen.

3. Tap Settings, and then select the Connections tab.

4. Tap Bluetooth, and then select the Devices tab.

5. Tap the bond you want to rename.

6. In the Name field, enter a new name for the bond.

7. Tap OK.

Bluetooth Hands-free Device
You can use a Bluetooth Hands-free device with your i730.

1. Create bond between your i730 and the Bluetooth Hands-free device. 

2. If the Hands-free device has Bluetooth wireless
technology functionality, the message "Would you like to
designate (Hands-free device name) as a hands-free device?" displays.

3. Tap Yes to set the Hands-free as your default Hands-free device.

Note: To change your default Hands-free device, select Start then Settings then
Connections tab then Bluetooth then Devices, then tap and hold the device you
want. Tap Set as Hands free on the pop-up menu.

Using Bluetooth Hands-free Device
Some or all of the features below are available when using your Bluetooth 
Hand-free device.

1. Voice recognition using the built-in "VoiceSignal" application.
2. Last number redial
3. Call holding and call switching
4. Caller ID display
5. End a call
6. Switching to a private call

Note: For specific information about the features available with your
Hands-free device, please refer to the manual provided with your device.

Bluetooth OBEX FTP
You can use the OBEX FTP application provided with
your i730 to exchange data with other devices with
Bluetooth wireless technology as the transport layer. The
OBEX FTP application has both a server and client
component. To use your i730 as Bluetooth OBEX FTP
server, set your i730 as discoverable, so the OBEX FTP
client will search for and automatically establish an OBEX FTP connection.

Note: Although your I730 has both an OBEX FTP server and client
component, some devices only support the OBEX FTP client functionality.

Bluetooth OBEX FTP Server Setting
If i730 OBEX FTP client attempts an OBEX FTP
connection with a PC, Bluetooth bonding is usually
required. The default shared folder of i730 OBEX FTP
server is "\My Documents"; however, you can adjust the OBEX
FTP server settings, such as authentication, shared folder,
and writing permission, in OBEX FTP tab under
Bluetooth settings.

Exchanging Files via OBEX FTP Server
When a client device attempts to download or upload files
from your i730 OBEX FTP server, a dialog box displays
either, "Do you want to send?" or "Do you want to
receive?" confirmation message, depending on the
related task. In either case, tap "Yes" to confirm that you
want to uploaded or downloaded the file from your server.

Using Bluetooth OBEX FTP Client
You can use the OBEX FTP client to exchange or delete
files and create folders on an OBEX FTP server.
Additionally, you can use Bluetooth wireless technology
or IrDA (Infrared) as the transport layer when accessing
the OBEX FTP feature.

1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap the OBEX FTP icon.

The OBEX FTP client default screen displays with this
message, "Do you want to search OBEX FTP device?".

4. Tap Yes to search for OBEX FTP servers.

5. If available, a list of OBEX FTP servers near your i730 is
displayed. Bluetooth OBEX servers have a Bluetooth
icon, while IrDA OBEX servers have an IrDA icon next to their entries.

6. Select the OBEX FTP server with which you want to
connect, and tap the OK button.

Note: It may be necessary to create a Bluetooth bond with the OBEX FTP
server before you can connect to it.

7. When you connect, your i730 displays the available folders and files on your screen.

Tip: If the OBEX FTP server you select has an authentication functionality,
you should set the OBEX password before making your connection. To set
the password, tap the OBEX Tool icon, and then select Config OBEX
Password. Enter the password, and tap the OK button.

Bluetooth Virtual Serial Port
There are many Bluetooth wireless technology devices
that support the Bluetooth serial profile, such as GPS. You
can use the i730 Bluetooth virtual serial port to make
Bluetooth serial connection with such devices.

Setting Bluetooth Virtual Serial Port

1. Create a Bluetooth bond between your i730 and the device you want to use. 

2. If the device supports the serial port profile, this
message, "(Device) support synchronizing using
Bluetooth. Would you like to designate it as an
ActiveSync partner?" displays.

3. Tap No if you don't want to make an ActiveSync
connection via the Bluetooth Virtual Serial Port.

4. After establishing a bond with the device, tap New
Outgoing Port on "COM Ports" tab under Bluetooth settings.

5. Select the device, and then tap Next.

6. Select the port, and then tap OK.

Connecting a Virtual Serial Port Device
The port you selected above can now be used in other
applications available on your i730. For example, you can
choose the port for communication when using a
Bluetooth GPS application.

ActiveSync via Bluetooth Wireless Technology
To use ActiveSync via Bluetooth wireless technology, you
need to configure the settings for both your PC and your i730.

PC Configuration

1. Add a COM port in the Bluetooth application you use on your PC.
2. In ActiveSync, select File>Connection Settings.
3. Choose the COM port added in Step 1, and then check
"Allow serial cable or infrared connection to this COM port."

PDA Configuration

1. Create a Bluetooth bond between your i730 and your PC.

2. Tap Yes in the Bluetooth ActiveSync dialog box that
displays, "(Your PC) supports synchronizing using
Bluetooth. Would you like to designate it as an
ActiveSync partner?"

3. Select Start then ActiveSync.

4. Select Tools, then tap "Connect via Bluetooth."

Using Bluetooth Keyboard
Your i730 supports the Bluetooth HID (Human Interface
Device) profile for optional keyboards. To use a Bluetooth
wireless technology enabled keyboard, follow these steps:

1. Create a Bluetooth bond between your i730 and the
Bluetooth keyboard. (Refer to the keyboard's manual for
specific instructions on how to establish a bond with the
device.)

2. Select Start, Settings, Connections, Bluetooth then HID tab.
The device name for the keyboard displays on this screen.

3. Tap and hold the device name, and then select Connect
to establish an HID connection between your i730 and
the keyboard.

4. To disable the keyboard, tap and hold the device name
again, and then select Disable.

About Wi-Fi
Wi-Fi is wireless networking that provides access to local
area networks without using network cabling, and it is
faster and has a greater range than Bluetooth wireless
technology. Wi-Fi can achieve connection speeds of up to
11Mbps, which easily allows you to share large files or
quickly surf the internet with your Pocket PC.

Note: Wireless Fidelity (Wi-Fi) is a WLAN based on the 802.11 protocol,
which transmits and receives in the 2.4 GHz frequency ISM band. The i730
supports the 802.11b protocol stack.

Note: The i730 may not be operable with all wireless access points.

Wi-Fi allows you to:

• Access the internet
• Access your corporate network
• Use hotspots provided by hotels or airports while traveling
• Send and receive email quickly

Enabling Wi-Fi

Important: Due to network requirements, Wi-Fi and your phone cannot be
enabled at the same time. If Wi-Fi is enabled, your phone is turned off so
you will not receive incoming calls or be able to make outgoing calls. If you
make an emergency call while Wi-Fi is enabled, your phone is
automatically turned on, which disables the Wi-Fi connection.

To turn Wi-Fi on in your i730, either tap the Wi-Fi icon on
the Today screen, or follow these steps:

1. Tap Start located in the upper left corner of the screen. 
2. Tap Settings, then tap the Connections tab.
3. Tap the Wi-Fi icon. When the Wi-Fi screen displays, tap the Wi-Fi Disabled button. The button changes to Wi-Fi Enabled.
4. Tap OK to return to the Connections screen.

Note: You can also turn Wi-Fi on by tapping the icon on the Today screen.
Tap Yes at the confirmation screen to enable Wi-Fi on your i730. Using Wi-
Fi consumes a lot of battery power.

Automatically Connecting to a Network
If one or more networks are present, the Wi-Fi screen icon
appears in the Title Bar of the Today Screen.

1. Select the SSID (Service Set Identifier) for the network you want.
2. Tap The Internet if the network connects to the Internet (does not use proxy settings) or Work (uses proxy settings).
3. If you are prompted for a Network or Security key, enter it and tap Connect.

Manually Entering Network Settings
A wireless network can be added when a network is
detected (the Wi-Fi icon appears in the Title Bar), or you
can add the network manually by entering setting information.

To manually add a wireless network:

1. From the Today screen, tap the Wi-Fi icon next to On
indicator). The Configure Wireless Networks screen displays.

2. To connect to other Wi-Fi network, tap and hold SSID of
the Wi-Fi network you want, then select Connect in pop up menu.

3. In the Networks to access box, tap the type of network
you want to connect to (All Available, Only access
points, or Only computer-to-computer).

4. To connect only to networks that have already been
configured, clear the Automatically connect to non-preferred
networks checkbox, if necessary.

Note: If you check the Automatically connect to non-preferred networks
checkbox, your Pocket PC will detect any new networks and provide you
the opportunity to configure them.

5. Tap OK to return to the Connections screen.

Changing Connection Information
Using either the Wireless or Network Adapters tabs
under "Network Card," you can change your connection
information. If your Wi-Fi network encrypts data with a
security key (WEP) or you need WPA authentication to
connect to your Wi-Fi network, you can set the
configurations under Wireless tab. The Network
Adapters tab allows you to choose whether you use a
fixed IP or the DHCP (Dynamic Host Control Protocol).

To get connection information of Wi-Fi network that you
are connected to, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Settings, then tap the Connections tab.

3. Tap Network Cards, and then tap the Network Adapters tab.

4. The connection property appears in the My network
card connects to:, and display either The internet or Work.

5. If your Wi-Fi network encrypts data with a security key
(WEP) or you need WPA authentication to connect your
Wi-Fi network, you can set the configuration on the Wireless tab.

6. Tap the SSID you want to change or configure.

7. Set or change the settings, and tap OK.

8. Confirm the changes, and tap OK again to return to the Connections screen.

Section 13: Accessories and Games

Topics Covered

• Accessories
• Remote Control
• Ringtone Manager
• Beam & SD I/O Expansion Slot
• Games

This section outlines the available gaming options and accessories for your phone.

Accessories
Your i730 supports many accessories that make your
phone truly unique. You can use your phone as a remote
control for other electronic devices, such as a TV or VCR,
or you can add an optional Hands Free Kit to allow you to
operate your phone while you drive, and your phone has
a built-in infrared (IR) port to allow you to transmit files,
contacts, or download information from other
compatible devices.

Remote Control
The Remote Control software is a Universal Remote
Control Program with a pre-defined RC database and
self-teach/learn mode. It consists of 5 profiles that
include, TV, DVD, VCR, Audio and Other. Each profile
can have up to 32 keys or functions so you can use your
PDA's hardware keys or touch screen to navigate and
control each individual device.

This application turns your i730 phone into a universal
remote that lets you wirelessly control your infrared (IR)
controlled devices. One unit that replaces all of your
remote controls.

Launch RC Program
To launch the Remote Control application, follow these steps:

1. Tap Start located in the upper left corner of the screen.

2. Tap Programs.

3. Tap Remote Control. The Remote Control application displays the last device or profile used.

Note: To display the Remote Home Screen, tap Home the icon at the top of
the current device. To select a different device, tap the current device
name to display a drop down menu of all devices available.

Add a Device
Before you can use your remote control program to
control a device, you must add the device. The 5 profiles
enable you to add a device, either by brand, which are
listed in the database for each pre-defined profile, or by
selecting self-learn where the device is set up using the
Learn feature described below.

Add by Brand

1. Launch the Remote Control application.
2. Tap Options, then select Add device.
3. Tap By brand, then select the type of device you are
adding. The Add device wizard displays. Choose one of the following:

• TV, DVD, VCR and Audio

4. Select a device from the brands listed.
5. Tap Done to exit.

Add by Self-learn

1. Launch the Remote Control application.
2. Tap Options, then select Add device.
3. Tap Self-learn. The Add device by self-learn wizard displays.
4. Tap Next, then enter the name for your device.
5. Tap Done to exit. The device is added to the Other profiles. 

Delete a Device
To remove a device, follow these steps:

1. Launch the Remote Control application.
2. Display the Remote Home Screen, if necessary.
3. Tap Options, then tap Delete device.
4. Highlight the device you want to delete from the Delete device screen, then tap Delete.
5. Tap Yes to confirm that you want to delete the device. The Delete Device screen displays.

Reset All Devices
To remove all devices added to your profile at the same time, follow these steps:

1. Launch the Remote Control application.
2. Display the Remote Home Screen, if necessary.
3. Tap Options, then tap Reset all. The Reset device confirmation screen displays.
4. To remove all of the devices you have added, tap Yes or tap No to cancel.

Note: Removing devices or selecting Reset all does not remove the device
profiles stored in the pre-defined product databases. However, if you add a
device using Self-learn and then remove it, you will have to repeat the
learning and programming steps each time you add the device to your profiles.

Programming Self-learn Devices
When you add devices using Self-learn, you must
program or use the built-in learn feature to setup or teach
your remote how to control a device. To use the built-in
learn feature, follow these steps:

1. Launch the Remote Control application.

2. Display the Remote Home Screen, if necessary.

3. Add a device using the Add by Self-learn feature
described in "Add a Device" above.

4. After adding a device, tap Other on the Remote Control
home screen. If the device you want does not display,
tap the current device name to display a drop down list
of all devices available.

5. Select the device you want, then tap any key to begin.
Follow the onscreen prompts to program the keys and
functions defined on the default Self-learn profile.

It's possible that the default profile created when the Self-learn
option is used provides keys you don't need or,
more likely, doesn't provide a key for a specific feature or
function you do want to be able to control. In either case,
you have the option of adding or deleting keys to suit your
needs. You can even move the keys around if necessary.

The sections that follow describe how to modify your remote control profiles.

Adding Keys
Once you have performed the steps in "Programming
Self-learn Devices", you can add other keys or functions to a profile.

Note: If you try to add keys before programming a device profile, then the
self-learn feature automatically starts when you select "Add key" from the Options menu.

To add a key to a profile, select the device you want, and then follow these steps:

1. Tap Options at the bottom of the current selected device profile.

2. Tap Add key. A pop up message displays that says to select a blank space for the new key.

3. After the Select Key list displays, highlight the key or function you want to add. Use the scroll bar to view the entire list, if necessary.

4. Tap Done. If the key or function already exists in the
profile, a pop up message displays. You can either select
another key or function to add or select cancel to exit.

Deleting Keys
To delete a key in a profile, select the device you want, and
then follow these steps:

1. Tap Options at the bottom of the current selected device profile.
2. Tap Delete key. A pop up message displays that says to
tap the key you want to delete.
3. Tap Yes to confirm that you want to remove the key. The
key is removed and the device profile displays.

Moving Keys
To move a key in a profile, select the device you want, and
then follow these steps:

1. Tap Options at the bottom of the current selected device
profile.
2. Tap Move key. A pop up message displays that says to
select the key you want to move.
3. Tap the key you want to move, then select a blank space
where you want to move the key to.
4. Tap Yes to confirm. The key is moved and the Device Remote screen displays.

Ringtone Manager
The Ringtone Manager application allows you to easily
manage all of your preloaded and downloaded ringtones
by placing them into either the default categories defined
by the application or by grouping your ringtones into
categories you decide to add.

With the Ringtone Manager, you can:

• Play and review any stored ringtone. These formats are supported:
• wma/mp3
• wav
• MIDI Types:

- MIDI
- XMF, Mobile XMF
- Mobile DLS

• Legacy Types:

- RMF
- iMelody, RTTTL, RTX
- SMAF MA1, MA2 & MA3 compliant

• Set a tone as your phone's ringtone
• Move ringtones from one category to another
• Add, rename, or delete ringtone categories

Launching Ringtone Manager
To launch Ringtone Manager, follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap the Ringtone Manager icon. The application screen displays.

Previewing Ringtones
To preview a stored ringtone, follow these steps:

1. Launch Ringtone Manager.

2. Tap and hold the ring tone to which you want to listen. A
pop-up menu displays.

3. Tap Play or press the center key on the navigation key.

4. To stop playing the ring tone, tap and hold the ring tone
again, then select Stop from the pop-up menu or press
the center key again to cancel.

5. To review a history of the ringtones you have set as a
default, tap the current ringtone displayed at the bottom
of your screen.

A pop up menu displays listing all previously selected
default ringtones.

Setting Your Phone's Ringtone
To change the ringtone played when you receive an
incoming call, follow these steps:

1. Launch Ringtone Manager.
2. To review the ringtone, tap Current next to the ringtone name.
3. To set a different ringtone, select the ringtone category with the ringtone you want.

Note: To change between categories, tap the Category Bar to display a
drop-down menu and then tap the category you want. You can also tap
either the right or left arrows in the Category Bar to move to the next
category in the list.

4. Tap and hold the ringtone to display a pop-up menu.

5. Tap Set as Ringtone to set the file you selected as your current ringtone.

Note: Alternatively, you can also highlight the ringtone you want to set as
your default, tap Menu at the bottom of your screen, and then tap Set as Ringtone.

Creating Ringtone Categories
There are three default categories for Ringtone Manager,
which are:

• Basic
• Cheerful
• Mood

When you select a category, a list of ringtones displays. To
add other categories to Ringtone Manager, follow these
steps:

1. Launch Ringtone Manager.
2. Tap Menu, and then tap Edit Category. A list of the current categories displays.
3. Tap New, and then enter the name of the category in the Category Name field.
4. Tap OK to add the category to Ringtone Manager.

Moving Ringtones Between Categories
To move ringtone files between categories, follow these steps:

1. Launch Ringtone Manager.
2. Tap Menu, and then tap Move Category. A list of the current categories displays.
3. Tap the category you want to move the ringtone to, then tap OK.

Renaming or Deleting a Category
You can change the name or delete any of the categories
listed in Ringtone Manager.

To edit or rename a category, follow these steps:

1. Launch Ringtone Manager.
2. Tap Menu, and then tap Edit Category. A list of the
current categories displays.
3. Tap the category you want to rename, then tap the
Rename button.
4. Re-enter the category name, and then tap OK.

To delete a ringtone category, follow these steps:

1. Launch the Ringtone Manager application.
2. Tap Menu, and then tap Edit Category. A list of the current categories displays.
3. Tap the category you want to delete, then tap the Delete button.
4. When the confirmation pop-up displays, tap OK to delete the ringtone category.

Beam
Your i730 can receive and transmit files using its built-in
infrared (IR) port. However, you must set your i730 to
accept incoming beams before receiving files.

Note: You cannot receive incoming IR beams unless you set your i730 to
accept all incoming beams.

Accepting Incoming Beams
To set your i730 to accept all incoming IR beams, follow these steps:

1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Connections tab.
4. Tap the Beam icon.
5. Check the box next to "Receive all incoming beams."
6. To exit and save, tap OK.

Sending a Beam
You can beam contacts, documents, tasks, workbooks,
and even pictures to other devices that are IR capable. To
send an IR beam to another device, you must align the IR
ports of both devices, and then select "Beam . . ." from the
appropriate menu. See the appropriate sections that
follow for specific details on beaming files to another device.

SD I/O Expansion Slot
The SD I/O Slot on the right side of the i730 is for use with
an SD (secure digital) card. SD cards come in a variety of
sizes and can hold up to 1 GByte of data. Download and
use applications, games, and more using the enhanced
storage capacity of the SD card.

Tip: The SD Slot is an I/O port that supports both input and output SD peripherals.

Transfer data to the SD Card from your Computer

1. Insert the SD Card (label side up) into the slot on the
right side of the i730. The beveled edge should be
facing toward the top of the phone.

2. Insert the i730 into the desktop cradle and synchronize
the device with your PC via ActiveSync.

3. Open Windows Explorer then highlight the application or
folder that you wish to transfer to the SD Card.

4. Highlight and copy the file(s) or folder(s) to your
computer's clipboard.

5. Using the ActiveSync menu, click the Explore icon to
open the My Pocket PC folder.

6. Double-click on the My Pocket PC folder.

7. Double-click the Storage Card folder to open. Any
contents of the SD Card appear in the display.

8. Locate the folder or sub folder where you wish to paste
the files that you've copied.

9. Press Ctrl-V on your computer to paste the files or folders
on your computer's clipboard to the i730 SD Card.

Use the SD Card
Once you've transferred files from your computer to the
SD Card using ActiveSync, you can access games or
applications that have been transferred to your SD Card.

For example, if you've transferred any multimedia files
onto your SD Card that are compatible with Windows
Media Player, simply open Windows Media Player and
select the media file that you wish to play. There is no need
to look or browse your phone for the SD Card. The SD
Card is recognized when it is installed.

Remove the SD Card

1. Press in on the card with your fingernail until you hear a
click, then quickly release. The card pops out of the slot
approximately one quarter of an inch.

2. Grasp the exposed section of the card and pull it out with
your fingers.

Games
There are two games included with your i730. Jawbreaker
and Solitaire are listed in the Games folder under
Programs. You can download other games and add these
to your Games folder or you can purchase many games on
optional memory cards that can be used on your Pocket PC.

Jawbreaker

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Games, then select Jawbreaker.
4. Tap Game and then select New Game to begin play.
5. Tap Game and then tap Options to display the options screen for the game.
6. Change the options you want and then press OK to return to the game.

Note: Pocket PC games can be downloaded from the Internet and stored
on your Pocket PC or SD Card. Instructions from the game download site
should inform you of the location (folder) in which to store the application
on your Pocket PC.

Solitaire

1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Games, then select Solitaire.
4. Tap New to display a new game. Play is ready to begin.
5. Select Tools and then tap Options to display the options screen for the game.
6. Change the options you want and then press OK to return to the game.

Section 14: Health and Safety Information

Topics Covered

• Health and Safety Information

This section outlines the safety precautions associated
with using your phone. These safety precautions
should be followed to ensure the safe use your phone

Health and Safety Information

Exposure to Radio Frequency (RF) Signals

SAR Certification Information
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These FCC exposure limits are derived
from the recommendations of two expert organizations,
the National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.

The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The FCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.

SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands.

Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.

Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.

The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:

• Head: 1.31 W/Kg.
• Body-worn: 0.58 W/Kg.

SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may be necessary to remove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
and it should provide values for typical or maximum SAR
for a particular phone. Additional product specific SAR
information can also be obtained at
www.fcc.gov/cgb/sar.

Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:

What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless phones
can expose the user to measurable radio frequency energy
(RF) because of the short distance between the phone and
the user's head. These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other federal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's compliance
limits.

Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF can
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.

What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard no
longer exists.

Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:

• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.

FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:

• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration

The National Institutes of Health participates in some
interagency working group activities, as well.

FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.

FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations are
thus not the primary subject of the safety questions
discussed in this document.

What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposed the animals to RF for up
to 22 hours per day. These conditions are not similar to the
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.

Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glaucoma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phones RF exposures. However,
none of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.

What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.

What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).

FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project
has also helped develop a series of public information
documents on EMF issues.

FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research
on wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.

What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.

• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.

What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.

Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence that
any health hazard exists.

Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.

Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike "hands-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
Federal trade Commission (FTC) charged two companies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their claim.

What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA
has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the problem.

Additional information on the safety of RF exposures
from various sources can be obtained from the following organizations:

• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/

• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/

• Occupational Safety and health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/

• National institute for Occupational Safety and health (NIOSH):
http://www.cdc.gov/niosh/pdfs/fs-cellp.pdf

• World health Organization (WHO):
http://www.who.int/peh-emf/en/

• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de

• National Radiation Protection Board:
http://www.nrpb.org/

• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones

Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:

1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.

2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.

3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.

4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.

5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!

9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.

10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency number.

Important: The wireless industry reminds you to use your phone safely when driving.

For more information, please call 1-888-901-SAFE, or visit
our web-site www.wow-com.com

Provided by the Cellular Telecommunications & Internet
Association

Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).

Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.

Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.

These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.

Persons with pacemakers:

• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize potential interference.

If you have any reason to suspect that interference is
taking place, switch your phone off immediately.

Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.

Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.

Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.

Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.

Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.

Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are in
progress.

Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.

Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-programmed
functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).

Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.

To make an emergency call:

1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the Send key.

If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.

When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.

Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others, damage the phone or make calls that increase your
phone bill.

FCC Notice and Cautions

FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.

Vehicles using liquefied petroleum gas (such as propane
or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.

Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.

Although your phone is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.

Other Important Safety Information

• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.

• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or accessories.

• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.

• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.

• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.

Product Performance

Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.

If you're inside a building, being near a window may give
you better reception.

Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.

Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.

Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.

Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.

There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.

• Hold the phone with the antenna raised, fully-extended and
over your shoulder.

• Try not to hold, bend or twist the phone's antenna.

• Don't use the phone if the antenna is damaged.

• Speak directly into the phone's receiver.

• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.

Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at
an additional cost. Other conditions and restrictions may
apply. See your service provider for additional
information.

Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.

Battery Precautions

• Never use any charger or battery that is damaged in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.

• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.

• If left unused, a fully charged battery will discharge itself over time.

• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.

• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.

• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 degrees C (32 degrees F).

• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.

• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.

Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many years.

• Keep the phone and all its parts and accessories out of the
reach of small children's.

• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.

• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.

• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.

• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.

• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.

• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.

• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.

• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.

• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.

• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.

Section 15: Warranty Information

Topics Covered

• Standard Limited Warranty

This section explains the warranty information for
your new phone.

Standard Limited Warranty

What is Covered and For How Long? SAMSUNG

TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time after that date:

Phone: 1 Year
Batteries: 1 Year
Leather Case/ Pouch: 90 Days
Holster: 90 Days
Other Phone Accessories: 1 Year

What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.

What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/replaced Product will be warranted for a period
equal to the remainder of the original Limited Warranty
on the original Product or for 90 days, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such Product.

WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:

• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;

• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;

• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;

• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR

• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND

RESULTING FROM THE PURCHASE, USE, OR MISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT
WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.

This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.

Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082

Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)

(c)2005 Samsung Telecommunications America. All rights reserved.

No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.

Intellectual Property Statement
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover, you agree
that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), L.P.

Internet Address: http://www.samsungusa.com

© 2005 Samsung Telecommunications America. Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.

Licensed by Qualcomm Incorporated under one or more
of the following patents: U.S. Patent No. 4, 901, 307; 5, 056,
109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.

Printed in South Korea

Openwave® is a registered Trademark of Openwave, Inc.

RSA® is a registered Trademark RSA Security, Inc.

Headquarters Customer Care Center
1301 East Lookout Dr. 1601 E. Plano Parkway, Suite 150
Richardson, TX 75082 Plano, TX 75074

Tel: 972.761.7000 Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7001 Fax: 972.761.7001 and 972.761.7501