VX5200 Important Safety Precautions Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide. WARNING Violation of the instructions may cause serious injury or death. • Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode. • Never place your phone in a microwave oven as it will cause the battery to explode. • Do not dispose of your battery by fire or with hazardous or flammable materials. • Make sure that no sharp-edged items such as animal's teeth or nails, come into contact with the battery. There is a risk of this causing a fire. • Store the battery out of reach of children. • Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation. • Unplug the power cord and charger during lightning storms to avoid electric shock or fire. • When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured. • Do not use a hand-held phone while driving. • Do not use the phone in areas where its use is prohibited. (For example: aircraft) • Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom. • Never store your phone in temperatures less than minus 4 degrees F or greater than 122 degrees F. • Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire. • Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards of the phone. • Do not use your phone in high explosive areas as the phone may generate sparks. • Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock. • Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause fire or electric shock. • Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone. • Do not disassemble the phone. • Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire. • Only use the batteries, antennas, and chargers provided by LG. The warranty will not be applied to products provided by other suppliers. • Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty. • Do not hold or let the antenna come in contact with your body during a call. • An emergency call can be made only within a service area. For an emergency call, make sure that you are within a service area and that the phone is turned on. Contents Important Safety Precautions Welcome Important Information FCC RF Exposure Information Phone Overview Menus Overview Getting Started with Your Phone The Battery Turning the Phone On and Off Screen Icons Making Calls Receiving Calls Quick Access to Convenient Features Manner Mode Lock Mode Mute Function Volume Quick Adjustment Call Waiting Caller ID Voice Command Dialing Speed Dialing Entering and Editing Information Text Input Text Input Examples Contacts in Your Phone's Memory The Basics of Storing Contacts Entries Options to Customize Your Contacts Editing Contacts Entries Deleting Phone Numbers With Pauses Searching Your Phone's Memory Making a Call From Your Phone's Memory Using Phone Menus Menu Access GET IT NOW 1. Get Tunes & Tones 1. 1 Get New Ringtones 1. 2 My Ringtones 1. 3 My Sounds 2. Get PIX 2. 1 Get New PIX 2. 2 My PIX 2. 3 PIX Place 2. 4 Take PIX 3. Get Fun & Games 4. Get News & Info 5. Get Going MESSAGING 1. New TXT MSG 2. New PIX Msg 3. Inbox 4. Sent 5. Drafts 6. Voice Mail 7. Email 8. Mobile IM 9. Chat Msg Settings Erase CONTACTS 1. New Contact 2. Contact List 3. Groups 4. Speed Dials RECENT CALLS 1. Missed 2. Received 3. Dialed 4. All 5. View Timer SETTINGS & TOOLS 1. Voice Menu 1. 1 Voice Commands 1. 2 Sound Modes 1. 3 Announce Alerts 1. 4 Best Match 1. 5 Train Words 1. 6 Help Normal Speed 2. Tools 2. 1 Calendar 2. 2 Alarm Clock 2. 3 Shortcut Key 2. 4 World Clock 2. 5 Notepad 2. 6 Calculator 2. 7 Ez Tip Calc 3. Sounds 3. 1 Master Volume 3. 2 Call Sounds 3. 3 Alert Sounds 3. 4 Keypad Volume 3. 5 Earpiece Volume 3. 6 Service Alerts 3. 7 Power On/Off Sound 4. Display 4. 1 Banner 4. 2 Backlight 4. 3 Contrast 4. 4 Wallpaper 4. 5 Display Themes 4. 6 Fonts 4. 7 Power On/Off Anim. 5. System 5. 1 Standalone Mode 5. 2 Network 5. 3 Device Info 5. 4 Location 5. 5 Security 5. 6 Language 6. Call Settings 6. 1 Answer Options 6. 2 Auto Retry 6. 3 TTY Mode 6. 4 One-Touch Dial 6. 5 Voice Privacy 6. 6 Auto Volume 7. Clock Format 8. Ringer ID 9. Picture ID 10. PC Connection Safety TIA Safety Information Exposure to Radio Frequency Signal Antenna Care Phone Operation Tips on Efficient Operation Driving Electronic Devices Pacemakers Hearing Aids Other Medical Devices Health Care Facilities Vehicles Posted Facilities Aircraft Blasting Areas Potentially Explosive Atmosphere For Vehicles Equipped with an Air Bag Safety Information FDA Consumer Update 10 Driver Safety Tips Consumer Information on SAR Accessories LIMITED WARRANTY STATEMENT Welcome Congratulations for choosing the advanced and compact VX5200 cellular phone, designed to operate with the latest digital mobile communication technology: Code Division Multiple Access (CDMA) and Advanced Mobile Phone Service (AMPS). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this phone offers: • Large, easy-to-read, 9-line backlight LCD with status icons. • Paging, messaging, voicemail, and caller ID. • 20-key keypad. • Speaker phone feature. • Menu-driven interface with prompts for easy operation and configuration. • Any key can be used to answer a call, auto answer, auto retry, one-touch and speed dialing with 99 memory locations. • Bilingual (English and Spanish) capabilities. Important Information This user's guide provides important information on the use and operation of your phone. Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty. FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories can not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation. Technical Details The VX5200 is an all digital phone that operates on both Code Division Multiple Access (CDMA) frequencies: cellular services at 800 MHz and Personal Communication Services (PCS) at 1.9 GHz. Also, the VX5200 works on Advanced Mobile Phone Service (AMPS). We call it a tri-mode phone. Since the phone operates on Cellular, PCS and AMPS, the call failure is less than that of a conventional dual-mode or single-mode phone. CDMA technology uses a feature called DSSS (Direct Sequence Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area. This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard Handoff, and dynamic RF power control technologies combine to reduce call interruptions. The Cellular and PCS CDMA networks consist of MSO (Mobile Switching Office), BSC (Base Station Controller), BTS (Base Station Transmission System), and MS (Mobile Station). The following table lists some major CDMA standards. * TSB-74: Protocol between an IS-95A system and ANSI JSTD- 008 1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. High-speed data transmission is also possible. CDMA Standard: Basic Air Interface Designator: TIA/EIA-95A Description: CDMA Tri-Mode Air Interface Designator: TSB-74 Description: 14.4 kbps radio link protocol and inter-band operations Designator: ANSI J-STD-008 Description: IS-95 adapted for PCS frequency band Designator: TIA/EIA-IS2000 Description: cdma2000 1xRTT Air Interface Designator: ANSI TIA/EIA 553A Description: Advanced Mobile Phone Service CDMA Standard: Network Designator: TIA/EIA/IS-634 Description: MAS-BS Designator: TIA/EIA/IS/651 Description: PCSC-RS Designator: TIA/EIA/IS-41-C Description: Intersystem operations Designator: TIA/EIA/IS-124 Description: Non-signaling data comm. CDMA Standard: Service Designator: TIA/EIAIS-96-B Description: Speech CODEC Designator: TIA/EIA/IS-99 Description: Async Data and Fax Designator: TIA/EIA/IS-637 Description: Short message service Designator: TIA/EIA/IS-657 Description: Packet Data Designator: IS-801 Description: Position Determination Service (gps One) Designator: TIA/EIA/IS-707-A Description: High Speed Packet Data CDMA Standard: Performance Designator: TIA/EIA/IS-97 Description: Cellular base station Designator: TIA/EIA/IS-98 Description: Cellular mobile station Designator: ANSI J-STD-018 Description: PCS personal station Designator: ANSI J-STD-019 Description: PCS base station Designator: TIA/EIA/IS-125 Description: Speech CODEC FCC RF Exposure Information WARNING! Read this information before operating the phone. In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Bodily Contact During Operation This device was tested for typical use with the back of the phone kept 3/4 inches (2 cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 3/4 inches (2 cm) must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Avoid the use of accessories that cannot maintain 3/4 inches (2 cm) distance between the user's body and the back of the phone and have not been tested for compliance with FCC RF exposure limits. Vehicle-Mounted External Antenna (Optional, if available) A minimum distance of 8 inches (20 cm) must be maintained between the user / bystander and the vehicle-mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov. Caution Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result. Contact your local dealer for a replacement antenna. Phone Overview 1. Earpiece lets you hear callers. Open flip: located at the top center. 2. Flip: Flip open the case to answer an incoming call and close to end the call. 3. LCD Screen displays messages and indicator icons. Located in the center of the open flip. 4. Headset Jack: Connect it to hear callers or listen to music or sounds through the headset. Located at the top left side of the phone face. 5. Left Soft Key: Use to get quick access to the Messaging menu. Located at the top left of the phone face. 6. Side Keys: Use to adjust the ringer volume in standby mode and the earpiece volume during a call. Located below the headset jack. 7. SEND Key: Use to make or answer calls. Located directly below the Left Soft Key. 8. Voice Commands Key: Use for quick access to Voice Commands. Located directly below Side Keys. 9. Manner Mode Key: Use to set the Manner Mode (from Main Menu Screen press and hold Star key for about 3 seconds).. Located to the left of the zero key. 10. Navigation Key: Use for quick access to GET PIX, GET IT NOW(r), Mobile Web. Located at the top of the phone face to the right. 11. Right Soft Key: Use to select an action within a menu. Located to the right of Navigation Key. 12. Shortcut Key: Allows you to set a shortcut. Located below Right Soft Key. 13. Side Camera Key: Use for quick access to Camera function. (Press and hold for about 3 seconds to use camera function). Located directly below Shortcut Key. 14. END/PWR Key: Use to turn the power on/off and to end a call. Also use to return to the main menu display screen. Located to the right of the Clear End key. 15. CLR/Speakerphone Key: Press to delete a single space or character. Press and hold to delete entire words. Press this key once in a menu to go back one level. Use to set the Speaker Phone Mode. Located between the Send and End Keys. 16. Alphanumeric Keypad: Use to enter numbers and characters and select menu items. Located on the bottom half of the phone face. 17. Lock Mode Key: Use in Main Menu SCreen to set the lock function by pressing and holding the Pound Key for about 3 seconds. 18. Microphone: Located at bottom center under alphanumeric keypad. GET IT NOW 1. Get Tunes & Tones 1. Get New Ringtones 2. My Ringtones 3. My Sounds 2. Get PIX 1. Get New PIX 2. My PIX 3. PIX Place 4. Take PIX 3. Get Fun & Games 1. Get New App. 4. Get News & Info 5. Get Going 1. Get New App. MESSAGING 1. New TXT MSG 2. New PIX MSG 3. Inbox 4. Sent 5. Drafts 6. Voicemail 7. Email 8. Mobile IM 9. Chat CONTACTS 1. New Contact 2. Contact List 3. Groups 4. Speed Dials RECENT CALLS 1. Missed 2. Received 3. Dialed 4. All 5. View Timer SETTINGS & TOOLS 1. Voice Menu 1. Call Someone 2. Voicemail 3. Digit Dial 4. Service Alerts 5. Missed Calls 6. Contacts 7. Announce 8. Time & Date 9. Phone Status 2. Tools 1. Calendar 2. Alarm Clock 2.1. Alarm 1 2.2. Alarm 2 2.3. Alarm 3 3. Shortcut Key 4. World Clock 5. Notepad 6. Calculator 7. Ez Tip Calc 3. Sounds 1. Master Volume 2. Call Sounds 2.1. Call Ringtone 2.2. Call Vibrate 3. Alert Sounds 3.1. PIX 3.2. TXT 3.3. Voice 3.4. Email 3.5. Page 4. Keypad Volume 5. Earpiece Volume 6. Service Alerts 6.1. ERI Sounds 6.2. Minute Beep 6.3. Call Connect 6.4. Back To Top 7. Power On/Off 4. Display 1. Banner 1.1. Personal Banner 1.2. ERI Banner 2. Backlight 2.1. Main LCD 2.2. Keypad 3. Contrast 3.1. Main LCD 3.2. Front LCD 4. Wallpaper 4.1. Main LCD 4.2. Front LCD 5. Display Themes 6. Fonts 7. Power On/Off Anim. 5. System 1. Standalone Mode 2. Network 2.1. System Select 2.2. Set NAM 2.3. Auto NAM 2.4. Serving System 3. Device Info 3.1. My Number 3.2. SW Version 3.3. Icon Glossary 4. Location 5. Security 5.1. Lock Phone 5.2. Emergency #s 5.3. Change Code 5.4. Erase Contacts 5.5. Reset Default 6. Language 6. Call Settings 6.1. Answer Options 6.2. Auto Retry 6.3. TTY Mode 6.4. One-Touch Dial 6.5. Voice Privacy 6.6. Auto Volume 7. Clock Format 7.1. Main Clock 7.2. Front Clock 8. Ringer ID 9. Picture ID 10. PC Connection Getting Started with Your Phone The Battery NOTE: It is important to fully charge the battery before initial use of the phone. The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen. Installing the Battery To install the battery, insert the battery into the opening on the back of the phone. Put the battery cover on the battery and push it slightly upwards. Removing the Battery Turn the power off. Lift the release latch to detach the battery. Charging the Battery To use the charger provided with your phone: Warning! Use only the charger provided with the phone. Using any charger other than the one included with the VX5200 may damage your phone or battery. 1. Plug the round end of the adapter into the phone's charger jack and the other end into an electrical outlet. 2. The charge time varies depending upon the battery level. The maximum charge time for a fully discharged battery is 3.5 hours. Battery Charge Level The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying Low Battery If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved. Four Bars: Fully Charged Three Bars, Two Bars, One Bar Zero Bars: Fully Discharged Turning the Phone On and Off Turning the Phone On 1. Install a charged battery or connect the phone to an external power source such as a vehicle power charger or hands-free car kit. 2. Press END for a few seconds until the LCD screen lights up. NOTE : Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on. Turning the Phone Off 1. Press and hold END until the display turns off. Signal Strength Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon: The more bars, the better the signal strength. If the signal quality is poor, move to an open area. If you are in a building, the reception may be better near a window. Screen Icons When the phone is powered on, the top line of the LCD screen displays icons indicating the status of the phone. Making Calls 1. Make sure the phone is turned on. If not, press END for about 3 seconds. 2. Enter the phone number (include the area code if needed). 3. Press SEND. If the phone is locked, enter the lockcode. Call Failed - indicates the call did not go through. 4. Press END to end the call. Correcting Dialing Mistakes If you make a mistake while dialing a number, press once to erase the last digit entered or hold down for at least 2 seconds to delete all digits. Redialing Calls 1. Press SEND twice to redial the last number you dialed. The last 30 numbers are stored in the call history list and you can also select one of these to redial. Receiving Calls 1. When the phone rings or vibrates press SEND to answer. NOTE: If you press Left Soft Key Quiet while the phone is ringing, the ringing or vibration is muted for that call. NOTE: If you press Right Soft Key Ignore while the phone is ringing, the call will end. 2. Press to end the call. Quick Access to Convenient Features Manner Mode Use Manner Mode in public places. When Manner Mode is set, vibrating phone is displayed on the screen, the key tones are silent, and the phone is set to vibrate. Manner Mode Quick Activation 1. From Main Menu Screen press Star key for 3 seconds. Manner Mode Quick Cancellation 1. Press and hold Star key to switch to Normal Mode. Lock Mode Use Lock Mode to prevent others from using your phone. When Lock Mode is set, your 4-digit password is required to use the phone. NOTE: The lock code/password is '0000' by default. Lock Mode Quick Activation 1. From Main Menu Screen, press Pound key for 3 seconds. Lock Mode Quick Cancellation 1. Press Right Soft Key Unlock then enter your 4- digit password. Mute Function The Mute function prevents the other party from hearing your voice, but allows you to hear the other party. Mute Quick Activation 1. Press Left Soft Key Mute during a call. Mute Quick Cancellation 1. Press Left Soft Key Unmute again. Volume Quick Adjustment Use the side keys to adjust the earpiece and ringer volumes. The upper key increases the volume and the lower key decreases the volume. Earpiece volume can be adjusted during a call. NOTE: Key beep volume is adjusted through the Menu. Call Waiting Your cellular service may offer call waiting. While a call is in progress, two beeps indicate another incoming call. When call waiting is enabled, you may put the active call on hold while you answer the other incoming call. Check with your cellular service provider for information about this function. 1. Press SEND to receive a waiting call. 2. Press SEND again to switch between calls. Caller ID Caller ID displays the phone number or name of the incoming call. If the caller's identity is stored in Contacts, the name appears with the number. Check with your service provider to ensure they offer this feature. Voice Command Dialing Voice Command is a convenient feature that allows you to activate certain features quickly and easily by verbal command. Using the Voice Command key, you can make a phone call, confirm voice mail and missed calls, set announce mode, edit the contact entries and so on. 1. Press the Voice Command Key. 2. When Prompted, say "Call Someone" 3. When Prompted, say the name entered in your contacts. The phone will ask you to confirm the name, then dial the number associated with the Contact name. NOTE: Another way to activate Voice Command is to set Announce Mode to on. When the flip is opened you will be asked to say a command. Speed Dialing Speed dialing is a convenient feature that allows you to make phone calls quickly and easily with a few keystrokes. Your phone recalls the number from your Contacts, displays it briefly, and then dials it. Speed Dial Number 1 is assigned to Voice Mail by default. Dialing Speed Dials from 2 to 9 Press and hold the Speed Dial number. OR Enter the speed dial number and press SEND. Dialing Speed Dials from 10 to 99 Press the first digit and then press and hold the key of the last digit. OR Enter the first and second digits and press SEND. Entering and Editing Information Text Input You can input and edit your Banner, Schedule, Contacts, and Messages. The Left Soft key brings you to the Messaging menu. 1. Select New TXT MSG. 2. Enter the number you wish to send a message to. 3. Press OK. 4. Press the Left Soft key for TXT input mode. Key Functions Left Soft Key: Press to scroll through the following text input modes: T9Word, Abc, ABC, 123 then Symbols Shift: Press to change case. T9 text: T9Word then T9WORD then T9word Abc text: Abc then ABC then abc Next: In T9 mode, press to display other matching words. Space: Press to complete a word and insert a space. Clear: Press to delete a single space or character. Hold to delete words. Punctuation: In T9 mode, press this key to insert punctuation in a word and complete a sentence. Text Input Modes There are five modes for entering text, numbers, special characters, and punctuation. In a text entry field, pressing Right Soft Key (or Left Soft Key) displays a pop-up list of text modes. T9Word (T9) Mode Use to type text using one keystroke per letter. The phone translates keystrokes into common words by using the letters on each key and a compressed database. Abc (Multi-tap) Mode Use to add words to the T9 database. 123 (Numbers) Mode Use to type numbers using one keystroke per number. Symbols Mode Use to insert special characters or punctuation. There are 38 special characters including "SP " which inserts a space and "LF" which forces the text to the next line. Changing Letter Case Using T9 and Abc text input modes you can set the capitalization. Press Star key to cycle through the following: Initial Cap (T9Word / Abc) Only the first letter is capitalized. All subsequent letters are lower case. Caps Lock (T9WORD / ABC) All letters are capitalized. Lower Case (T9word / abc) All letters are in lower case. Text Input Examples Display the text modes and select a text mode: 1. In a text entry field, press Left Soft Key to display text modes. 2. Press Up or Down Scroll key to highlight the text input mode you want to use. 3. Press OK to select the highlighted text input mode. Using Abc (Multi-tap) Text Input 1. Press Left Soft Key to change to Abc mode. 2. Press Star key to change to ABC Caps Lock. 3. Press 5, 5, 5, 5 LG is displayed. Using 123 (Numbers) Text Input 1. Press Left Soft Key to change to 123 mode. 2. Press 5, 5, 5, 1, 2, 1, 2 5551212 is displayed. Using T9 Mode Text Input 1. Press Left Soft Key to change to T9Word mode. 2. Press 2, 2, 5, 5. 3. Press Pound key to complete the word and add a space. 4. Press 8, 4, 3, Pound, 6, 3, 3, 4, 2, 3, 1. Call the office. is displayed. Using the NEXT Key After you have finished entering a word, if the word displayed is not the one you want, press 0 to display additional choices of words from the database. 1. Press 4, 6, 6, 3. Good is displayed. 2. Press 0. The display gives you additional choices such as: Home, Gone, Hood, etc. Contacts in Your Phone's Memory Contacts Entries This allows you to have easy access to your most frequently dialed phone numbers. You may store up to 500 entries with up to 5 phone numbers each. Each entry may be up to 22 characters. Each phone number may be up to 48 digits. The Basics of Storing Contacts Entries 1. From Main Menu Screen enter the phone number you want to save (up to 48 digits). 2. Press Left Soft Key Save. 3. Use Up or Down Scroll key to select Save New Contact or Update Existing and press OK. 4. Use Up or Down Scroll key to select a Label and press OK. Mobile 1 / Home / Work / Mobile 2 /Fax NOTE: Select the Update Existing option when you are adding another phone number to a contact that already exists. 5. Enter a name for the phone number (up to 22 characters) and press OK. A confirmation message is displayed briefly. NOTE: To skip name entry, press OK to go to the next step. NOTE: If the information is complete, press END to return to the Main Menu Screen. Options to Customize Your Contacts Once basic phone number and name information are stored in your Contacts, you can edit and/or customize the entries. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight the Contact entry you want to edit , then press OK. 2. Press EDIT to access the Edit Contact screen. 3. Use Up or Down Scroll key to highlighted the information you want to customize and press OK. Adding or Changing the Group Allows you to manage your Contacts entries by organizing them into groups. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight an entry, then press OK. 2. Press OK EDIT. 3. Use Up or Down Scroll key to highlight Group and press Left Soft Key Set. 4. Use Up or Down Scroll key to select the Group and press OK. 5. Press OK to save. NOTE: You can change the name of the group, add groups, and delete groups. Changing the Call Ringtone Allows you to identify who is calling by setting different ringers for different phone numbers in your Contacts. It is automatically set to the default ringer when the Contact is saved. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight an entry, then press OK. 2. Press OK EDIT. 3. Use Up or Down Scroll key to highlight Ringtone and press OK Set. 4. Use Up or Down Scroll key to select the Ringtone and press OK. 5. Press OK to save. Changing the Message Ringtone Allows you to identify who is sending you a message by setting different ringers for different phone numbers in your Contacts. It is automatically set to the default ringer when the Contact is saved. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight an entry, then press OK. 2. Press OK EDIT. 3. Use Up or Down Scroll key to highlight MSG Ringtone and press Left Soft Key Set. 4. Press Left Soft Key to select the Ringtone and press OK. 5. Press OK to save. Adding or Changing the Picture ID Allows the phone to display a picture to identify the caller. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight an entry, then press OK. 2. Press OK EDIT. 3. Use Up or Down Scroll key to highlight Picture and press OK Set. 4. Use Up or Down Scroll key to select a graphic and press OK. 5. Press OK to save. Adding or Changing the Email Allows you to enter an Email address associated with the Contact entry. 1. Press Right Soft Key Contacts and use Up or Down Scroll key to highlight an entry. 2. Press OK EDIT. 3. Use Up or Down Scroll key to highlight Email 1. 4. Enter an Email address and press OK to save. Adding Speed Dial 1. Press OK. 2. Press 4 Speed Dials. 3. Use the navigation key to select the number for Speed Dial digit and press OK. 4. Use the navigation key to highlight the contact name. 5. Press OK to save. Contacts in Your Phone's Memory Editing Contacts Entries Adding Another Phone Number From the Main Menu Screen 1. From Main Menu Screen, enter the phone number you want to save (up to 48 digits). 2. Press Left Soft Key Save. 3. Use Up or Down Scroll key to highlight Update Existing and press OK. 4. Choose contact then press OK. 5. Use Up or Down Scroll key to highlight a Label and press OK. Mobile 1 / Home / Work / Mobile 2 / Fax 6. Press OK to save. A confirmation message is displayed. From the Contacts Screen 1. From Main Menu Screen, press Right Soft Key Contacts. Your Contacts display alphabetically. 2. Use Up or Down Scroll key to highlight the Contact entry you want to edit, then press Left Soft Key Edit. 3. Use Up or Down Scroll key to highlight a Label, then enter the number and press OK to save. A confirmation message is displayed. Default Numbers The phone number saved when a Contact is created is the Default Number. If more than one number is saved in a Contact entry, another number can be saved as the Default Number. NOTE: The Default Number cannot be deleted by itself. The entire Contact entry can be deleted or another number can be set as the Default Number allowing you to delete the original saved number and keep the Contact entry. Changing the Default Number 1. From Main Menu Screen, press Right Soft Key Contacts. Your Contacts display alphabetically. 2. Use Up or Down Scroll key to highlight the Contact entry you want to edit, then press Left Soft Key Edit. 3. Use Up or Down Scroll key to highlight the phone number you want to set as the Default Number and press Right Soft Key Options. 4. Press Up or Down Scroll key Set As Default and press OK. 5. Press OK to Set As Default Yes. Editing Stored Phone Numbers 1. From Main Menu Screen, press Right Soft Key Contacts. Your Contacts display alphabetically. 2. Use Up or Down Scroll key to highlight the Contact entry you want to edit, then press Left Soft Key Edit. 3. Use Up or Down Scroll key to highlight the phone number. 4. Edit the phone number as necessary and press OK. Editing Stored Names 1. From Main Menu Screen, press Right Soft Key Contacts. Your Contacts display alphabetically. 2. Use Up or Down Scroll key to highlight the Contact entry you want to edit, then press Left Soft Key Edit. 3. Edit the name as necessary and press OK. Deleting Deleting a Phone Number from a Contact 1. Press Right Soft Key Contacts. 2. Use Up or Down Scroll key to highlight the Contact entry, then press Left Soft Key Edit. 3. Use Up or Down Scroll key to highlight the phone number to be deleted. 4. Press and hold CLR to delete number. 5. Press OK. A confirmation message is displayed. Deleting a Contact Entry 1. Press Right Soft Key Contacts. 2. Use Up or Down Scroll key to highlight the Contact entry to be deleted. 3. Press Right Soft Key Options. 4. Press 2 Erase. 5. Press Up or Down Scroll key to select Yes. 6. Press OK. A confirmation message is displayed. Deleting a Speed Dial 1. From standby mode, press OK Menu. 2. Use Up or Down Scroll key to highlight the Speed Dials, then press OK. 3. Use Up or Down Scroll key to highlight the Speed Dial number. 4. Press Right Soft Key Remove. 5. Press OK. A confirmation message is displayed. Phone Numbers With Pauses When you call automated systems such as voicemail or credit billing numbers, you often have to enter a series of numbers. Instead of entering these numbers by hand, you can store the numbers in your Contacts separated by special pause characters (W, T). There are two different types of pauses you can use when storing a number: Wait (W) The phone waits 2 seconds before sending the next string of digits. Pause (P) The phone stops dialing until you press Left Soft Key Release to advance to the next number. Storing a Number With Pauses 1. From standby mode, enter the number. 2. Press Right Soft Key Options. 3. Use Up or Down Scroll key to select pause type and press Wait / Pause OK. 4. Enter additional number(s) (e.g., pin number or credit card number) and press OK. 5. Press Left Soft Key Save. 6. Use Up or Down Scroll key to select Save New Contact or Update Existing and press OK. 7. Use Up or Down Scroll key to select a Label and press OK. 8. Enter a name (up to 22 characters) and press OK. A confirmation message is displayed. Adding a Pause to an Existing Number 1. Press Right Soft Key Contacts. 2. Use Up or Down Scroll key to highlight the Contact entry to edit, then press Left Soft Key Edit. 3. Use Up or Down Scroll key to highlight the number. 4. Press Right Soft Key Options. 5. Press 3 Wait or 4 Pause. 6. Enter additional number(s) and press OK. A confirmation message is displayed. Searching Your Phone's Memory The VX5200 phone is able to perform a dynamic search of the contents in your phone's memory. A dynamic search compares entered letters or numbers against the entries in your Contacts. A matching list is displayed in descending order. You can then select a number from the list to call or edit. There are several ways to search: Scrolling Alphabetically Searching by Letter Scrolling Through Your Contacts 1. Press Right Soft Key Contacts. Contacts list is displayed alphabetically. 2. Use Up or Down Scroll key to scroll through the list. Searching by Letter 1. Press Right Soft Key Contacts. Contacts list is displayed alphabetically. 2. Press (or press repeatedly) the key on the keypad that corresponds with the search letter. Making a Call From Your Phone's Memory Once you have stored phone numbers into your Contacts, you can place calls to those numbers quickly and easily. Pressing SEND after you've searched for a phone number in Contacts or Recent Calls. Using Speed Dialing From Contacts 1. Press Right Soft Key Contacts. 2. Use Up or Down Scroll key to select the Contact entry and press OK. 3. Use Up or Down Scroll key to select the phone number. 4. Press SEND to place the call. From Recent Calls 1. Press OK Menu. 2. Press Right Scroll key to select RECENT CALLS. 3. Use Up or Down Scroll key to select the type of recent call and press OK. Missed / Received / Dialed / All / View Timer 4. Use Up or Down Scroll key to highlight the phone number. 5. Press SEND to place the call. Speed Dialing Speed dialing is a convenient feature that allows you to make phone calls quickly and easily. Designate Speed Dials in your Contacts to use this calling feature. Pre-Programmed Speed Dial positions is as follows; - Voicemail(#1):Provides user with easy access to the VZW (Verizon Wireless) voicemail system. - Balance(BAL #97): VZW Customer Service number(free call) that provides customers information on their VZW billing balance. - Minute Usage(MIN #98): VZW Customer Service number(free call) that provides customers information on their VZW usage. - Payment(PMT #99):VZW Customer Service number(free call) that allows user to make a bill payment, either with a payment option they have already set up, or using a new, one time payment option. For Speed Dials From 2 to 9 1. Press and hold the Speed Dial digit. OR Press the Speed Dial digit, and then press SEND. 2. Your phone recalls the phone number from your Contacts, displays it briefly, and then dials it. For Speed Dials From 10 to 99 1. Press the first digit, then press and hold the key of the last digit. OR Press the first Speed Dial digit, press the second Speed Dial digit, and then press SEND. 2. Your phone recalls the phone number from your Contacts, displays it briefly, and then dials it. Using Phone Menus Menu Access Press Menu or Left Soft Key Message to have access to five phone menus. There are two methods of accessing menus and submenus: Use the navigation key to highlight and select, or Press the number key that corresponds to the menu or submenu. For example: 1. Press OK Menu. Five menu items are displayed. Use Left or Right Scroll key to scroll through the list of menus. 2. Use Up or Down Scroll key to highlight your preferred setting and press OK to select it. NOTE: Press CLR to go back one step while accessing the menu or selecting a setting. NOTE: Press CLR to cancel without saving. GET IT NOW Get It Now allows you to do more than just talk on your phone. Get It Now is a technology and service that allows you to download and use applications on your phone. With Get It Now, it is quick and easy to personalize your phone to your lifestyle and tastes. Just download the applications that appeal to you. With a wide range of software available, from ringtones to games to productivity tools, you can be assured that you can find something useful, practical, or entertaining. Downloading Applications You can download applications and use Get It Now anywhere on the Verizon Wireless network, as long as your handset has a digital signal available. Most applications do not use a network connection while in use. Incoming Calls While downloading an application, incoming calls will automatically be sent to your voice mail, if available. If you do not have voice mail, downloading will not be interrupted by an incoming call, and the caller will receive a busy signal. When using applications, an incoming call will automatically pause the application and allow you to answer the call. When you complete your call, you can resume using the application. Access and Options 1. Press OK Menu. 2. Press Left Scroll Key 2 Times. Short Cut: You can access the GET IT NOW feature directly by pressing Right Scroll Key. 1 Get Tunes & Tones: You can download and play various ring tones at anytime. 2 Get PIX: View your digital pictures. Take and trade pictures with your friends instantly. 3 Get Fun & Games: Turn your phone into a handheld arcade with exciting and challenging games like Tetris, EverQuest(r) and EA SPORTSTM Tiger Woods PGA TOUR(r) Golf. 4 Get News & Info: Get the latest news, stock quotes, and movie listings on the internet. To start, just launch your phone's Web browser. 5 Get Going: Everything you need to know while you are on the go. Look for a great restaurant or the nearest ATM. Right Soft Key Info. [1] Memory / [2] View Log / [3] Help 1. Get Tunes & Tones Personalize your phone with ringtones. A large variety of choices are available to choose from current hits, pop, hiphop, and more. Access and Options 1. Press OK Menu. 2. Press Left Scroll key 2 times. 3. Press 1 Get Tunes & Tones. 4. Select a sub-menu. Get New Ringtones, My Ringtones, My Sounds Using Phone Menus 1.1 Get New Ringtones Allows you to connect to Get It Now and download various ringtones. 1. Press OK Menu, Left Scroll key 2 times, 1, 1. 2. Press OK. 1.2 My Ringtones Allows you to record new sound to set as ringtone. 1. Press OK. 2. Press OK to start recording. 3. Record new sound and press Stop OK when you want to stop recording. 1.3 My Sounds Allows you to play, rename, or erase for voice memos recorded during a call or sounds saved in PIX Message. 1. Press OK Menu, Left Scroll key 2 times, 1, 3. 2. Press OK. 3. Press Left Soft Key Erase. 4. Press Right Soft Key Options. Send - Send the PIX message To PIX Place - Accessing the Online Album/PIX Place Rename - Rename the selected Sound Lock/Unlock - Lock/Unlock Erase All - Yes/No Sound Info - File Name/File Size/File Type 2. Get PIX Quick Access to Get PIX Feature View, take and trade your digital pictures right from your wireless phone. Access and Options 1. Press OK Menu. 2. Press Left Scroll key 2 times. 3. Press Get PIX. Short Cut: Pressing Left Scroll key hot key to Get PIX. 4. Select a sub-menu. Get New PIX, My PIX, PIX Place, Take PIX 2.1 Get New PIX 1. Press OK Menu, Left Scroll key 2 times, 2, 1. * This service may not be available. Check with carrier for availability. 2.2 My PIX Allows you to view photos that are stored in the phone. 1. Press OK Menu, Left Scroll key 2 times, 2, 2. 2. Select your desired picture with and press Right Soft Key Options. 3. Select Get New. 4. Select the options to customize. Send: Sends the PIX message To PIX Place: Accessing the Online Album, PIX Place Get New: Download applications and use Get It Now. Set As: Main Wallpaper / Front Wallpaper / Picture ID Rename: Rename the selected PIX Lock/Unlock: Lock / Unlock Erase: Yes / No Erase All: Yes / No PIX Info: Name / Date / Time / Resolution / File Size / Extension 2.3 PIX Place Accessing the Online Album, PIX Place. 1. Press OK Menu, Left Scroll key 2 times, 2, 3. 2.4 Take PIX Lets you to take digital pictures. 1. Press OK Menu, Left Scroll key 2 times, 2, 4. Short Cut: Pressing the camera key or Side CAmera key from standby mode is a hot key to Take PIX. 2. Set the brightness Up or Down Scroll key, zoom Left or Right Scroll key, flash Side Camera key , and press Right Soft Key Options to change other settings. Select the option(s) to customize. Resolution 640x480 / 320x240 / 160x120 Self Timer 3 seconds / 5 seconds / 10 seconds Flash On / Off Brightness EV -2 to +2 White Balance Auto / Sunny / Cloudy / Fluorescent /Tungsten / Darkness Shutter Sound Shutter 1 / Shutter 2 / No Sound Color Effects Normal / Antique / Black & White /Negative Multishot 3 Shots / 5 Shots 3. Take a picture by pressing OK. 4. Press Left Soft Key Save. The picture is stored in the My PIX. Using the Side Camera Key With Side Camera key, you can access the camera preview mode directly, when the flip is closed. 1. Press the Side Camera key for about 3 seconds and preview of camera is displayed. In preview mode, press the Side Camera key once again and taking a picture is activated and picture is automatically saved. Whenever press Voice Memo key, Flash On/Off is alternatively set. 3. Get Fun & Games Allows you to download games and applications from the Get It Now server. Choose the software you want from the list displayed on the screen. 1. Press OK Menu, Left Scroll key 2 times, 3. 1. Press OK Get New App.. 4. Get News & Info The Get News & Info feature allows you to access news, sports, weather, and email from your Verizon Wireless device. Access and selections within this feature are dependent upon your service provider. For specific information on Get News & Info access through your phone, contact your service provider. Quick Access to News & Info Feature Get the latest news, stock quotes, and movie listings. With TXT Alerts, you'll always know what you need to know. 1. Press OK Menu, Left Scroll key 2 times, 4. Ending a Browser Session End a Browser session by pressing END. Navigating Through the Browser On-screen items may be presented in one of the following ways: Numbered options You can use your numeric keypad or you can select the items by moving the cursor and pressing the appropriate Soft Keys. Links embedded in content You can act on the options or the links by using the Soft Keys just below the display screen. Text or numbers You can select the items by moving the cursor and pressing the appropriate Soft Keys. Scrolling Use to scroll through the content if the current page does not fit on the screen. The currently selected item is indicated by a cursor on the screen. Fast Scrolling Press and hold Up or Down Scroll key to quickly move the cursor up and down on the current screen. Scrolling by Page Press the Side Keys to move up and down a page at a time. Home Page To go to the Home Page, press and hold SEND or CLR. View Browser Menu Press and hold Voice Dial key to use the browser menu. View Browser Inbox If there are any browser messages, the list is displayed from newest to oldest. Your list of Web messages are displayed. Press and hold 0 key to view Browser Inbox. Soft Keys To navigate to different screens or select special functions, use the Soft Keys. The function associated with the Soft Keys can change for each page and depends on each highlighted item. Left Soft Key Left Soft Key is used primarily for first options or selecting an item but its function may change, depending on the content displayed. Right Soft Key Right Soft Key is used primarily for secondary options or a menu of secondary options. Entering Text, Numbers, or Symbols When prompted to enter text, the current text entry method appears above the Right Soft Key as Alpha, Symbol, Number or Word. To change the input mode, press the Right Soft Key. To create an upper case character, use Star. The current text method appears above the Right Soft Key as ALPHA, ABC or abc and allows you to shift input case sensitivity. Deleting Text/Number Entered When entering text or numbers, press to clear the last number, letter or symbol. Press and hold to clear the input field completely. Initiating a Phone Call From the Browser You can make a phone call from the Browser if the site you are using supports the feature (the phone number may be highlighted and Left Soft Key appears as Call). The browser connection is terminated when you initiate the call. After you end the call, your phone returns to the screen from which you initiated the call. 5. Get Going Everything you need to know while you're on the go. 1. Press OK Menu, Left Scroll key 2 times, 5. 1. Press OK Get New App. MESSAGING Text messages, PIX messages, and the voice mail box become available as soon as the phone is powered on. Check types of messages by pressing the message key. Read and edit messages saved in the sent during transmission and send them. The phone can store up to 231 messages (1 voice message, 50 inbox text messages, 30 inbox PIX messages, 50 inbox PIX notification messages, 50 sent text messages, 20 sent PIX messages, 15 draft text messages, 15 draft PIX messages). The information stored in the message is determined by phone mode and service capability. Other limits to available characters per message may exist. Please check with your service provider for system features and capabilities. New Message Alert There are two ways your phone alerts you to new messages. 1. The phone displays the message on the screen. 2. The message icon is displayed on the display screen. In the case of a high message, the icon will flash and High Priority Message is displayed. NOTE: If you receive the same message twice, your phone deletes the older one and the new one is stored as a DUPLICATE. Access and Options 1. Press OK Menu. 2. Press Left Scroll key MESSAGING. 3. Select a sub-menu. Short Cut: Pressing Left Soft key is a hot key to Message. 1 New TXT MSG: Sends a txt message. 2 New PIX MSG: Sends a PIX message. 3 Inbox: Shows the list of received messages. 4 Sent: Shows the list of sent messages. 5 Drafts: Shows the list of draft messages. 6 Voicemail: Shows the number of messages in the voicemail box. 7 Email: Read and send e-mails from your e-mail accounts. 8 Mobile IM: Instant message your friends with MSN(r) Messenger, Yahoo(r) Messenger and AOL Messenger. 9 Chat: Chat with Internet Messenger users. 1. New TXT MSG Allows you to send text messages, pages, and e-mail. Each message has a destination (Address 1) and information (Message). These are dependent upon the type of message you want to send. The Basics of Sending a Message 1. Press Left Soft Key, 1 select New TXT MSG. 2. Enter the phone number of the recipient or the e-mail address for an e-mail message. 3. Press OK. NOTE: To send a page, press OK Send now. 4. Type your message (text or e-mail). 5. Press OK SEND. A sending animation is displayed. NOTE: If you send an SMS message to a phone without SMS, you will still be notified that the message was sent, however the message will not be received. Customizing the Message Using Options 1. Create a new message. 2. Press Right Soft Key Options. 3. Select the option(s) to customize. Add: Allows you to add a Graphics, Animation, Sound, Quick Text or Signature. Format Text: Allows you to change the look of the text. Alignment / Font Size / Font Style / Text Color / Background Save As Draft: Saves the message into the Draft folder. Priority Level: Gives priority to the message. Normal / High Callback #: Inserts a pre-programmed callback number with your message. On / Off / Edit Save Quick Text: Allows you to define phrases to insert as Insert Quick Text. Add To Contacts: Stores destination address into your Contacts. Cancel: Cancels message editing and goes to message menu. 4. Complete and then send or save the message. Using Contacts to Send a Message You can designate an entry saved in your Contacts as Address 1 instead of manually entering the destination. 1. Press Left Soft Key, 1 select New TXT MSG. 2. Press Left Soft Key Add. 3. Use Up or Down Scroll key to highlight Contacts and press OK. 4. Use Up or Down Scroll key to highlight the Contact entry containing the destination and press OK. 5. Press Left Soft Key Done. NOTE: The Address 1 feature allows multi-sending of up to 10 total addresses. 6. Complete the message as necessary. 2. New PIX MSG You can conveniently send a PIX Msg with sound & text to and from any other Verizon Wireless CDMA camera phone or any e-mail address. The Basics of Sending a Message 1. Press Left Soft Key, 2 select New PIX MSG. 2. Enter the cellular phone number or e-mail address of the recipient. Email address for an e-mail message. 3. Press OK. NOTE: To send a page, press Send now. 4. Type your message (text or e-mail). 5. Use Up or Down Scroll key to highlight the PIX and Left Soft Key My PIX. Select the PIX and press OK. 6. Use Up or Down Scroll key to highlight the Sounds and Left Soft Key Sounds. Use Up or Down Scroll key to select the sound and press OK. 7. Use Up or Down Scroll key to highlight the Subject and enter the subject. 8. Press OK SEND. A confirmation message is displayed. Customizing the Message Using Options 1. Create a new message. 2. Press Right Soft Key Options. 3. Select the option(s) to customize. Preview: To see the PIX message as it would be seen by the recipient. Add Quick Text: Inserts predefined phrases. What's up? / Let's meet. / Check this out! / Whacha doing? / Thanks / What do you think? / You've gotta be here to enjoy this / Would you like to join me for a date tonight? / On my way. / Yes / You're the best! / Call me. Save As Draft: Saves the message into the Drafts folder. Priority Level Gives priority to the message. Normal / High Remove Picture: Removes a PIX from your message. Remove Sound: Removes a Sound from your message. Save Quick Text: Allows you to define phrases to insert as Insert Quick Text. Add To Contacts: Store destination address into your Contacts. Cancel: Cancels message editing and goes to the message menu. 4. Complete and then send or save the message. 3. Inbox The phone alerts you in 3 ways when you receive a new message: By displaying a message notification on the screen. By sounding a beep or vibrating, if set. By blinking envelope. (only when you get a high priority messages.) Received text messages, picture messages, and e-mail lists may be searched and the contents viewed. Received messages are displayed from newest to oldest. Out of Memory Warning If the memory is full, no more messages can be received until enough memory space becomes available. The message NOT ENOUGH MEMORY is displayed and new messages are not accepted. Viewing Your Inbox 1. Press Left Soft Key 3, select Inbox. 2. Options from here: Left Soft Key Erase. Right Soft Key Options. Reply: Replies to the Text or picture. Forward: Forwards a received message to other destination address(es). Add To Contacts: Stores the callback number, e-mail address, and numbers from the address included in the received message into your Contacts. Lock/Unlock: Locks or unlocks the selected message. Locked messages can not be deleted by the Erase Inbox and Erase All functions. Message Info: Checks the received message information. Message Icon Reference Sealed envelope: New/Unread Text Messages Open envelope: Opened/Read Text Messages Sealed envelope with paper clip: Downloaded/Unread PIX/FLIX Messages Open envelope with paper clip: Opened/Read PIX/FLIX Messages 4. Sent Up to 70 sent messages can be stored in Sent View lists and contents of sent messages and verify whether the transmission was successful or not. 1. Press Left Soft Key 4, select Sent. 2. Options from here: Left Soft Key Erase. Right Soft Key Options. Forward: Forwards a sent message to other destination address(es). Resend: Allows you to retransmit the selected message. Add To Contacts: Stores the callback number, e-mail address, and numbers from the address included in the sent message into your Contacts. Lock/Unlock: Locks or unlocks the selected message. Locked messages can not be deleted by the Erase Sent and Erase All functions. Message Info: Checks the sent message information. 5. Drafts Displays draft messages. 1. Press Left Soft Key, 5 select Drafts. 2. Options from here: Left Soft Key Erase. Right Soft Key Options. Send: Allows you to send the selected message. Add to Contacts: Stores the callback number, e-mail address, and numbers from the address included in the draft message into your Contacts. Lock/Unlock: Locks a message so that it is not erased if the Erase Drafts or Erase All feature is used. 6. Voice Mail Allows you to view new voice messages recorded in the voice mail box. Once you exceed the storage limit, old messages are overwritten. When you have a new voice message, your phone will alert you. Checking Your Voice Mail Box 1. Press Left Soft Key, 6 select Voicemail. Then, press OK to send. 7. Email Allows you to send an Email. 1. Press Left Soft Key, 7 select Email. Launch Browser. 8. Mobile IM Allows you to add new applications, and send and receive an Instant Message at any time. 1. Press Left Soft Key, 8 select Mobile IM. To Start Get It Now, press OK. 9. Chat Allows you to chat with Internet Messenger users. 1. Press Left Soft Key, 9 select Chat. Launch Browser. Msg Settings Allows you to configure ten settings for received messages, send messages and voice mail. 1. Press OK Menu, MESSAGING, press Left Soft Key Settings. 2. Use Up or Down Scroll key to highlight one of the settings and press OK to select it. Auto Save: Auto Save / Prompt / Do Not Save Auto Erase: On / Off TXT-Auto View: On / Off PIX-Auto Receive: On / Off TXT-Callback # Edit Voice Mail # Entry Mode: T9Word / Abc / ABC / 123 Quick Text TXT-Auto Play: On / Off TXT-Signature: None / Custom Message Settings Sub-Menu Descriptions Auto Save With this feature on, messages are automatically saved in Sent when transmitted. Auto Erase With this feature on, read messages are automatically deleted when you exceed the storage limit. TXT-Auto View Allows you to directly display the content when receiving a message. PIX-Auto Receive Allows you to directly download the content when receiving a Pix message. TXT-Callback # Allow you to manually enter the callback number when you send a message. Edit Voice Mail # Allows you to manually enter the access number for Voice Mail Service. This number should be only used when a VMS access number is not provided from the network. Entry Mode Allows you to select the default input method including T9Word, Abc, ABC, 123. NOTE: If Entry Mode is set, it is also applied to Notepad, and Calendar Menu. Quick Text Allows you to display, edit, and add text phrases. These text strings allow you to reduce manual text input into messages. TXT-Auto Play Display automatically scrolls down while viewing messages. TXT-Signature Allows you to make/edit a signature to automatically send with your messages. Erase Allows you to erase all text messages stored in your Inbox, Outbox, or Drafts folders. You can also erase all messages at the same time. 1. Press OK Menu, Left Scroll key MESSAGING, press Right Soft Key Erase. Press 1 Erase Inbox to erase all messages stored in the Inbox. Press 2 Erase Sent to erase all messages stored in Sent. Press 3 Erase Drafts to erase all messages stored in the Drafts folder. Press 4 Erase All to erase all messages stored in the Inbox, Sent, and Drafts folders. 2. Select Yes to erase the message. A confirmation message is displayed. CONTACTS The Contacts Menu allows you to store names, phone numbers and other information in your phone's memory. When you access your Contacts, the number in parentheses represents the number of entries you have stored (up to 500). Access and Options 1. Press OK Menu. 2. Select a sub-menu. 1. New Contact 2. Contact List 3. Groups 4. Speed Dials Short Cut: Pressing Right Soft key is a hot key to Contact List. 1. New Contact Allows you to add a new number. NOTE: Using this sub-menu, the number is saved as a new Contact. To save the number into an existing Contact, edit the Contact entry. 1. Press OK Menu. 2. Press 1 New Contact. 3. Enter the name and press Down Scroll key. 4. Enter the number and press OK. 2. Contact List Allows you to view your Contacts list. 1. Press OK Menu. 2. Press 2 Contact List. 3. Press Up or Down Scroll key to scroll through your Contacts alphabetically. Press Right Soft Key Options to select one of the following: New Contact / Erase / Send TXT MSG / Send PIX MSG / Call Press Left Soft Key Edit to edit. Press OK VIEW to view the contact information. 3. Groups Allows you to view your grouped Contacts, add a new group, change the name of a group, or delete a group. 1. Press OK Menu. 2. Press 3 Groups. 3. Use Up or Down Scroll key to highlight a group to view and press OK. Press Left Soft Key New to add a new group to the list. Use Up or Down Scroll key to highlight a group and press Right Soft Key . Send TXT MSG / Send PIX MSG / Rename / Erase / Add Press OK VIEW to view the group information. 4. Speed Dials Allows you to view your list of Speed Dials or designate Speed Dials for numbers entered in your Contacts. 1. Press OK Menu, 4. 2. Press 4 Speed Dials. 3. Use to Up or Down Scroll key highlight the Speed Dial position, or enter the Speed Dial digit and press OK. 4. Use Up or Down Scroll key to highlight the Contact and press OK. 5. Use Up or Down Scroll key to highlight the number and press OK. A confirmation message is displayed.' RECENT CALLS The Recent Calls Menu is a list of the last phone numbers or Contact entries for calls you placed, accepted, or missed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. NOTE: To view a quick list of all your recent calls, press SEND from the Main Menu. Up Arrow indicates a dialed call. Down Arrow indicates a received call. X indicates a missed call. Access and Options 1. Press OK Menu. 2. Press Right Scroll key RECENT CALLS. 3. Select a sub-menu. 1. Missed 2. Received 3. Dialed 4. All 5. View Timer 1. Missed Allows you to view the list of missed calls; up to 30 entries. 1. Press OK Menu, Right Scroll key, 1. 2. Use Up or Down Scroll key to highlight an entry, then Press OK to view the entry. Press SEND to place a call to the number. Press Right Soft Key Options to select: Save / Erase / Erase All / View Timer Press Left Soft Key Message to select: TXT MSG / PIX MSG 2. Received Allows you to view the list of incoming calls; up to 30 entries. 1. Press OK Menu, Right Scroll key, 2. 2. Use Up or Down Scroll key to highlight an entry, then Press OK to view the entry. Press SEND to place a call to the number. Press Right Soft Key Options to select: Save / Erase / Erase All / View Timer Press Left Soft Key Message to select: TXT MSG / PIX MSG 3. Dialed Allows you to view the list of outgoing calls; up to 30 entries. 1. Press OK Menu, Right Scroll key, 3. 2. Use Up or Down Scroll key to highlight an entry, then Press OK to view the entry. Press SEND to place a call to the number. Press Right Soft Key Options to select: Save / Erase / Erase All / View Timer Press Left Soft Key Message to select: TXT MSG / PIX MSG 4. All 1. Press OK Menu, Right Scroll key, 4. 2. Use Up or Down Scroll key to highlight an entry, then Press OK to view the entry. Press SEND to place a call to the number. Press Right Soft Key Options to select: Save / Erase / Erase All / View Timer Press Left Soft Key Message to select: TXT MSG / PIX MSG NOTE: To view a quick list of all your recent calls, press from SEND standby mode. 5. View Timer Allows you to view the duration of selected calls. 1. Press OK Menu, Right Scroll key, 5. 2. Use Up or Down Scroll key to highlight a call list. Last Call / All Calls / Received Calls / Dialed Calls / Roaming Calls / Transmitted KB / Received KB / Total KB / Last Reset / Lifetime Calls / Lifetime KB SETTINGS & TOOLS The Setup menu has options to customize your phone. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Select a sub-menu. 1. Voice Menu 2. Tools 3. Sounds 4. Display 5. System 6. Call Settings 7. Clock Format 8. Ringer ID 9. Picture ID 10. PC Connection 1. Voice Menu Your phone voice menu includes a Call Someone, Voicemail, Digit Dial, Service Alerts, Missed Calls, Contacts, Announce, Time & Date, Phone Status. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Press Voice Menu. 4. Select a sub-menu. Call Someone, Voicemail, Digit Dial, Service Alerts, Missed Calls, Contacts, Announce, Time & Date, Phone Status. 1 Call Someone: Phone call is made by saying the name, saved in the Contacts, based on List Contacts search. 2 Voicemail: Connects to *86 and Voicemail. 3 Digit Dial: Phone call is made by saying the telephone number of 4, 7, 10 and 11 digits. 4 Service Alerts: Reads out the number of missed calls, new voicemails, and new messages. 5 Missed Calls: Reads out the number of new missed calls and the list of all missed calls. 6 Contacts: Creates, reads, or erases the Contacts. 7 Announce: Sets the Announce Mode On/Off. 8 Time & Date: Announces the time and date and displays it on the phone. 9 Phone Status: Reads out the phone status. Allows you to select options for voice activation, announce alerts and recognition results; and enables you to adapt the phone to recognize your way of saying numbers. 1.1 Voice Commands Allows you to set how you activate voice recognition. 1. Press Settings, 1. 2. Use Up or Down Scroll key to select a setting, then press OK. Flip Open: Activates voice recognition whenever you flip open the phone.(When the phone is already open, you activate voice recognition by pressing the voice command key.) Side Key Only: Activates voice recognition when you flip open the phone and press the voice command key. 1.2 Sound Modes Allows you to set Announce Mode. 1. Press Settings, 2. 2. Use Up or Down Scroll key to select a setting, then press OK. Announce Mode / Normal Mode For example, 1) Phone announces the first menu item that is highlighted. 2) When the cursor is moved, the highlighted menu item is announced. 3) Menu readout only to the first sub-level. 1.3 Announce Alerts Allows you to notify caller ID and sender of message by voice. 1. Press Settings, 3. 2. Use Up or Down Scroll key to select a setting, then press OK. NOTE: When Announce Alerts is set, is displayed on the screen. 1.4 Best Match After you say a name or a number, your phone displays the recognition results-the name or number that best matches the one you said-and asks you to confirm. Select the number of results that you want your phone to display. 1. Press Settings, 4. 2. Use Up or Down Scroll key to select a setting, then press OK. 1 Match: Displays the name or number that best matches the one you said. 4 Match: Displays the four names or numbers that best match the one said and asks you if the first one is correct. If you say "Yes," the phone makes the call. If you say "No," the phone suggests the second one if the list, and so on, up to the fourth result. 1.5 Train Words Train Words is an optional personalization feature that helps your phone recognize the way you pronounce commands. If you do not get consistently good results with the commands, perform this brief, one time session. 1. Press Settings, 5. 2. Use Up or Down Scroll key to select a setting, then press OK. Voice Menu / Digits / Yes, No / Contacts / Phone Label 1.6 Help Helps you to use the Voice menu. 1. Press Settings, 6. Allows you to activate certain feature quickly and easily by verbal command. Without Voice Prompt, you can make phone call, confirm voice mail and missed calls, set announce mode, edit the contact entries and so on. Normal (OK, Right Scroll key 2 times 1) 1. Press Mode, 1. Speed (OK, Right Scroll key 2 times 2) 1. Press Mode, 2. 2. Tools Your phone tools include a Calendar, Alarm Clock, Shortcut Key, World Clock, Notepad, Calculator and Ez Tip Calc. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Press 2 Tools. 4. Select a sub-menu. Calendar, Alarm Clock, Shortcut Key, World Clock, Notepad, Calculator and Ez Tip Calc. 2.1 Calendar Allows you to keep your agenda convenient and easy to access. Simply store your appointments and your phone will alert you with a reminder of your appointments. 1. Press OK Menu, Right Scroll key 2 times 2, 1. 2. Use Scroll key to highlight the scheduled day. Left Scroll key: Moves cursor to the left. Right Scroll key: Moves cursor to the right. Up Scroll key: Moves to the previous week. Down Scroll key: Moves to the next week. 3. Press Left Soft Key Add. 4. Enter your schedule information including: Subject Date Time Repeat Ringtone Vibrate Reminder 5. Press SAVE. NOTE: Scheduler will not alert sound you when transmitting SMS, or when connecting up After exiting, it will sound the reminder. 2.2 Alarm Clock Allows you to set one of three alarms including Turning ON/ OFF, Time, Recurrence, and Ringtone. Alarm 1 (or 2 or 3) will be displayed on the LCD screen and the alarm will sound. 1. Press OK Menu, Right Scroll key 2 times 2, 2. 2. Select the alarm you want to edit and press OK. [1] Alarm 1 / [2] Alarm 2 / [3] Alarm 3 3. Press Left Soft Key to select On/Off then press Down SCroll key. 4. Press Left Soft Key Set. 5. Set the time for alarm and press OK. 6. Press Left Soft Key to select one of the following: Once / Daily / Mon - Fri / Weekends 7. Press Left Soft Key Set. 8. Use Up or Down Scroll key to select one of the available alarm Ringtone types and press OK. 9. Press SAVE. 2.3 Shortcut Key Allows you to set a shortcut to Messaging, Recent Calls, Contacts, Tools, Settings, Get Tunes & Tones, My PIX, Get Fun & Games or Get News & Info using the Down Navigation key. 1. Press OK Menu, 2 times 2, 3. An explanation message is displayed. 2. Press OK to continue. 3. Select the shortcut, then press OK. 2.4 World Clock Allows you to determine the current time in another time zone or country. 1. Press OK Menu, 2 times 2, 4. NOTE: With Left Soft Key Set DST, set the daylight saving time. 2.5 Notepad Allows you to read, add, edit, and erase notes to yourself. 1. Press OK Menu, Right Scroll key 2 times 2, 5. 2. Press Left Soft Key Add to write a new note. 2.6 Calculator Allows you to perform simple mathematical calculations. You can enter number up to the Fifth decimal Place. 1. Press OK Menu, Right Scroll key 2 times 2, 6. NOTE: Calculations can be made with up to 3 lines at one time. 2.7 Ez Tip Calc Allows you to quickly and easily calculate the amounts for a bill with the amount of the bill, the amount of the tip and the number of people as variables. 1. Press OK Menu, Right Scroll key 2 times 2, 7. 3. Sounds Options to customize the phone's sounds. Access and Options 1. Press OK Menu. 2. Press Right Scroll key2 times SETTINGS & TOOLS. 3. Press Sounds. 4. Select a sub-menu. Master Volume, Call Sounds, Alert Sounds, Keypad Volume, Earpiece Volume, Service Alerts and Power On/Off 3.1 Master Volume Allows you to set volume settings. 1. Press OK Menu, Right Scroll key 2 times 3, 1. 2. Adjust the volume with Up or Down Scroll key then press OK to save the setting. 3.2 Call Sounds Sets ringtones for types of incoming calls. 1. Press OK Menu, Right Scroll key 2 times 3, 2. 3.2.1. Call Ringtone Select Caller ID / No Caller ID / Restrict Calls / All Calls. Use Up or Down Scroll key to select a ringtone then press OK to save the sound. 3.2.2. Call Vibrate Use Up or Down Scroll key to select On/Off then press OK to save. 3.3 Alert Sounds Allows you to select the alert type for a new message. 1. Press OK Menu, Right Scroll key 2 times 3, 3. Select PIX / TXT / Voice / Email / Page. Use Up or Down Scroll key to select then press OK to set the sound. Select Tone / Vibrate / Reminder. Use Up or Down Scroll key select then press OK to save. 3.4 Keypad Volume Allows you to set the keypad volume. 1. Press OK Menu, Right Scroll key 2 times 3, 4. 2. Adjust the volume with Up or Down Scroll key then press OK to save the setting. 3.5 Earpiece Volume Allows you to set the earpiece volume. 1. Press OK Menu, Right Scroll key 2 times 3, 5. 2. Adjust the volume with Up or Down Scroll key then press OK to save the setting. 3.6 Service Alerts Allows you to set any of the five Alert options to either On or Off. 1. Press OK Menu, Right Scroll key 2 times 3, 6. 2. Select an alert option. 3.6.1. ERI Sounds Alerts you to the status of cellular service. 3.6.2. Minute Beep Alerts you 10 seconds before the end of every minute during a call. 3.6.3. Call Connect Alerts you when the call is connected. 3.6.4. Back To Top Alerts you when you scroll through the end of a menu list. 3. Select an alert option and press OK. 4. Set On / Off with Up or Down Scroll key then press OK. 3.7 Power On/Off Sound Allows you to set the phone to sound a tone when the phone is powered on/off. 1. Press OK Menu, Right Scroll key 2 times 3, 7. 2. Set On / Off then press OK. 4. Display Options to customize the phone's display screen. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Press 4 Display. 4. Select a sub-menu. Banner, Backlight, Contrast, Wallpaper, Display Themes, Fonts and Power On/Off Anim.. 4.1 Banner Allows you to enter a string of up to 23 characters which displays on the LCD screen. 4.1.1. Personal Banner 1. Press OK Menu, Right Scroll key 2 times 4, 1, 1. 2. Enter your banner text then press OK. 4.1.2. ERI Banner 1. Press OK Menu, Right Scroll key 2 times 4, 1, 2. 2. Set On / Off with Up or Down Scroll key then press OK. If you use ERI Service, ERI Text is shown on the main LCD. 4.2 Backlight Allows you to set the duration for illuminating the backlight. Main LCD and Keypad are set separately. 1. Press OK Menu, Right Scroll key 2 times 4, 2. 2. Choose a Backlight sub-menu and press OK. 4.2.1. Main LCD 7 Seconds 15 Seconds 30 Seconds Always On: means that the backlight is always on. Always Off: means that the backlight is never on. 4. 2. 2. Keypad 7 Seconds 15 Seconds 30 Seconds Always On: means that the backlight is always on. Always Off: means that the backlight is never on. 4.3 Contrast Allows you to choose the kind of background to be displayed on the phone. 1. Press OK Menu, Right Scroll key 2 times 4, 3. 2. Choose a Contrast sub-menu and press OK. [1] Main LCD / [2] Front LCD 3. Use Up or Down Scroll key to adjust the contrast level, then press OK. 4.4 Wallpaper Allows you to choose the kind of background to be displayed on the phone. 1. Press OK Menu, Right Scroll key 2 times 4, 4. 2. Choose a Wallpaper sub-menu and press OK. [1] Main LCD / [2] Front LCD 3. Select from different screens then press OK. 4.5 Display Themes Allows you to choose the color of the background screen. 1. Press OK Menu, Right Scroll key 2 times 4, 5. 2. Select Default / Business / Tropical / Blue then press OK. 4.6 Fonts Allows you to set the dial font size. 1. Press OK Menu, Right Scroll key 2 times 4, 6. 2. Select Normal / Large then press OK. 4.7 Power On/Off Anim. Allows you to choose the animation. 1. Press OK Menu, Right Scroll key 2 times 4, 7. 2. Select Animation 1 / Animation 2 then press OK. 5. System The System menu allows you to designate specific system network settings. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Press 5 System. 4. Select a sub-menu. Standalone Mode, Network, Device Info, Location, Security and Language 5.1 Standalone Mode Allows you to use the menu functions except making calls, and web accessing when the radio transmission is restricted. 1. Press OK Menu, Right Scroll key 2 times 5, 1, 1. 2. Select On / Off then press OK. 5.2 Network 5.2.1. System Select Allows you to select a preferred cellular provider. This setting has been factory preset and should only be changed after consulting with your service provider. 1. Press OK Menu, Right Scroll key 2 times 5, 2, 1. 2. Select Home Only / Automatic A / Automatic B then press OK. 5.2.2. Set NAM Allows you to select the phone's NAM (Number Assignment Module) if the phone is registered with multiple service providers. 1. Press OK Menu, Right Scroll key 2 times 5, 2, 2. 2. Select NAM1 / NAM2 then press OK. 5.2.3. Auto NAM Allows the phone to automatically switch between programmed telephone numbers corresponding to the service provider area. 1. Press OK Menu, Right Scroll key 2 times 5, 2, 3. 2. Select On / Off then press OK. 5.2.4. Serving System Identifies the channel number of a system that is served and a SID Number. This information is only for technical support. 1. Press OK Menu, Right Scroll key 2 times 5, 2, 4. 5.3 Device Info 5.3.1. My Number Allows you to view your phone number. 1. Press OK Menu, Right Scroll key 2 times 5, 3, 1. 5.3.2. SW Version Allows you to view the software, PRL, ERI, browser and Get It Now version. 1. Press OK Menu, Right Scroll key 2 times 5, 3, 2. 5.3.3. Icon Glossary Allows you to view all the icons and their meanings. 1. Press OK Menu, Right Scroll key 2 times 5, 3, 3. 5.4 Location Menu for GPS (Global Positioning System: Satellite assisted location information system) mode. 1. Press OK Menu, Right Scroll key 2 times 5, 4. 2. Select Location On / E911 Only then press OK. NOTE: GPS satellite signals are not always transmitted, especially under bad atmospheric and environmental conditions, indoors etc. 5.5 Security The Security menu allows you to secure the phone electronically. 5.5.1. Lock Phone Keeps your phone from unauthorized use. Once the phone is locked, it is in restricted mode until the lock code is entered. You can receive phone calls and still make emergency calls. You can modify the lock code using the New Lock code within the Security menu. 1. Press OK Menu, Right Scroll key 2 times 5, 5. 2. Enter the four-digit lock code. The lock code is '0000' by default. 3. Press 1 Lock Phone. 4. Select an option then press OK. Unlock: The phone is never locked (Lock mode can be used). Lock: The phone is always locked. When locked, you can receive incoming calls and only make emergency calls. On Power Up: The phone is locked when it is turned on. 5.5.2. Emergency #s Allows you to enter 3 emergency numbers. You can call these emergency numbers and 911, even when the phone is locked or restricted. 1. Press OK Menu, Right Scroll key 2 times 5, 5. 2. Enter the four-digit lock code. 3. Press 2 Emergency #s. 4. Select emergency number using Up or Down Scroll key. 5. Enter an emergency phone number then press OK. 5.5.3. Change Code Allows you to enter a new four-digit lock code. 1. Press OK Menu, Right Scroll key 2 times 5, 5. 2. Enter the four-digit lock code. 3. Press Change Code. 4. For confirmation, it will ask you to enter the new lock code again. 5.5.4. Erase Contacts Allows you to erase all of your Contacts at once. 1. Press OK Menu, Right Scroll key 2 times 5, 5. 2. Enter the four-digit lock code. 3. Press Erase Contacts. 4. Select Yes then press OK. 5.5.5. Reset Default Allows you to enter a new four-digit lock code. 1. Press OK Menu, Right Scroll key 2 times 5, 5. 2. Enter the four-digit lock code. 3. Press 5 Reset Default. 4. Press OK, select Revert then press OK. 5.6 Language Allows you to set the bilingual feature according to your preference. Choose between English and Spanish. 1. Press OK Menu, Right Scroll key 2 times 5, 6. 2. Select English / Spanish then press OK. 6. Call Settings The Call Setup menu allows you to designate how the phone handles both incoming and outgoing calls. Access and Options 1. Press OK Menu. 2. Press Right Scroll key 2 times SETTINGS & TOOLS. 3. Press Call Settings. 4. Select a sub-menu. Answer Options, Auto Retry, TTY Mode, One-Touch Dial, Voice Privacy and Auto Volume. 6.1 Answer Options Allows you to determine how to handle an answered call. 1. Press OK Menu, Right Scroll key 2 times 6, 1. 2. Select Flip Open / Any Key / Send Only / Auto Answer then press OK. NOTE: If the flip is closed, the Auto Answer Mode is not operated, except when connected to headset or hands-free car kit If the flip is opened, it operates when the Speaker mode is On. Auto Answer function operates in about 5 seconds. 6.2 Auto Retry Allows you to set the length of time the phone waits before automatically redialing a number when the attempted call fails. 1. Press OK Menu, Right Scroll key 2 times 6, 2. 2. Select Off / Every 10 Seconds / Every 30 Seconds / Every 60 Seconds then press OK. 6.3 TTY Mode Allows you to attach a TTY device enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY. 1. Press OK Menu, Right Scroll key 2 times 6, 3. 2. Press OK to continue. 3. Select TTY Full / TTY+TALK / TTY+HEAR / TTY Off then press OK. 6.4 One-Touch Dial Allows you to initiate a speed dial call by pressing and holding the speed dial digit. If set to Disable, Speed Dial numbers designated in your Contacts will not function. 1. Press OK Menu, Right Scroll key 2 times 6, 4. 2. Select On / Off then press OK. 6.5 Voice Privacy Allows you to set the voice privacy feature for CDMA calls as Enhanced or Standard. CDMA offers inherent voice privacy. Check with your service provider for availability. 1. Press OK Menu, Right Scroll key 2 times 6, 5. 2. Select Enhanced / Standard then press OK. 6.6 Auto Volume Provides a better audio experience by enabling the Auto Volume feature to control the dynamic range and volume of the sending and receiving voice across different levels of speaker and environments. 1. Press OK Menu, Right Scroll key 2 times 6, 6. 2. Select On / Off then press OK. 7. Clock Format Allows you to choose the kind of clock to be displayed on the LCD screen. 1. Press OK Menu, Right Scroll key 2 times 7. 2. Press Main Clock or Front Clock. 3. Select Normal / Analog then press OK. 8. Ringer ID Alerts you with the designated ringer ID, when the phone rings. 1. Press OK Menu, Right Scroll key 2 times 8. 2. Select On / Off then press OK. 9. Picture ID Allows you to choose the kind of clock to be displayed on the LCD screen. 1. Press OK Menu, Right Scroll key 2 times 9. 2. Select On / Off then press OK. 10. PC Connection Allows you to select the data port. 1. Press OK Menu, Right Scroll key 2 times 10. 2. Select USB/ RS-232C(COM Port) / Closed then press OK. NOTE: When using 1X HSPD data service via an RS-232C data cable, the port speed is set to 115,200 (230,400 is not supported). When using 1X HSPD data service via a USB data cable, you may get better port speed if the port speed is set to 230,400 rather than 115,200. Safety TIA Safety Information The following is the complete TIA Safety Information for wireless handheld phones. Exposure to Radio Frequency Signal Your wireless handheld portable phone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out Radio Frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies: ANSI C95.1 (1992)* NCRP Report 86 (1986) ICNIRP (1996) American National Standards Institute; National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your phone complies with the FCC guidelines (and those standards). Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Phone Operation NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. Tips on Efficient Operation For your phone to operate most efficiently: Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Driving Check the laws and regulations on the use of wireless phones in the areas where you drive and always obey them. Also, if using your phone while driving, please observe the following: Give full attention to driving: driving safely is your first responsibility. Use hands-free operation, if available; Pull off the road and park before making or answering a call if driving conditions or the law so require. Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: Should ALWAYS keep the phone more than six (6) inches from their pacemaker when the phone is turned ON; Should not carry the phone in a breast pocket; Should use the ear opposite the pacemaker to minimize the potential for interference; Should turn the phone OFF immediately if there is any reason to suspect that interference is taking place. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives.) Optional for each phone manufacturer. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Health Care Facilities Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Turn your phone OFF in any facility where posted notices so require. Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a "blasting area" or in areas posted: "Turn off two-way radio". Obey all signs and instructions. Potentially Explosive Atmosphere Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always marked clearly. Potential areas may include: fueling areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal powders); and any other area where you would normally be advised to turn off your vehicle engine. For Vehicles Equipped with an Air Bag An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all the times after reading it. Caution Violation of the instructions may cause minor or serious damage to the product. Charger and Adapter Safety The charger and adapter are intended for indoor use only. Insert the battery pack charger vertically into the wall power socket. Use the correct adaptor for your phone when using the battery pack charger abroad. Only use the approved battery charger. Otherwise, this may result in serious damage to your phone. Battery Information and Care Please dispose of your battery properly or take it to your local wireless carrier for recycling. The battery does not need to be fully discharged before recharging. Use only LG-approved chargers specific to your phone model since they are designed to maximize battery life. Do not disassemble or short-circuit the battery. Keep the battery's metal contacts clean. Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before replacement. Recharge the battery after long periods of non-use to maximize battery life. Battery life will vary due to usage patterns and environmental conditions. Use of extended backlighting, MiniBrowser, and data connectivity kits affect battery life and talk/standby times. The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on. Explosion, Shock, and Fire Hazards Do not put your phone in a place subject to excessive dust and keep the minimum required distance between the power cord and heat sources. Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it is dirty. When using the power plug, ensure that it is firmly connected. If it is not, it may cause excessive heat or fire. If you put your phone in a pocket or bag without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Always cover the receptacle when not in use. Do not short-circuit the battery. Metallic articles such as a coin, paperclip or pen in your pocket or bag may short circuit the + and - terminals of the battery (metal strips on the battery) upon moving. Short-circuit of the terminal may damage the battery and cause an explosion. Do not disassemble or crush the battery. It may cause a fire. General Notice Using a damaged battery or placing a battery in your mouth may cause serious injury. Do not place items containing magnetic components such as a credit card, phone card, bank book or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip. Talking on your phone for a long period of time may reduce call quality due to heat generated during use. When the phone is not used for a long period time, store it in a safe place with the power cord unplugged. Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference to the phone. Do not use the phone if the antenna is damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG Authorized Service Center to replace the damaged antenna. Do not immerse your phone in water. If this happens, turn it off immediately and remove the battery. If the phone does not work, take it to an LG Authorized Service Center. The power cord on this product will expose you to lead, a chemical known to the State of California to cause (cancer) birth defects or other reproductive harm. Wash hands after handling. Do not paint your phone. The data saved in your phone might be deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers. (Ring tones, text messages, voice messages, pictures, and videos could also be deleted.) The manufacturer is not liable for damage due to the loss of data. When you use the phone in public places, set the ring tone to vibration so as not to disturb others. Do not turn your phone on or off when putting it in your ear. FDA Consumer Update The U.S. Food and Drug Administration's Center for Devices and Radiological Health Consumer Update on Mobile Phones: 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of Radio Frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the Main Menu Screen. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 2. What is the FDA's role concerning the safety of wireless phones? Under the law, the FDA does not review the safety of radiation emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit Radio Frequency energy (RF) at a level that is hazardous to the user. In such a case, the FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace, or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, the FDA has urged the wireless phone industry to take a number of steps, including the following: Support needed research into possible biological effects of RF of the type emitted by wireless phones; Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. The FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group: National Institute for Occupational Safety and Health Environmental Protection Agency Occupational Safety and Health Administration National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. The FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. The FCC relies on the FDA and other health agencies for safety questions about wireless phones. The FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3. What kinds of phones are the subject of this update? The term "wireless phone" refers here to handheld wireless phones with built-in antennas, often called "cell", "mobile", or "PCS" phones. These types of wireless phones can expose the user to measurable Radio Frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by FCC safety guidelines that were developed with the advice of the FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called "cordless phones," which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits. 4. What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of Radio Frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used. 6. What is the FDA doing to find out more about the possible health effects of wireless phone RF? The FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to Radio Frequency energy (RF). The FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The project has also helped develop a series of public information documents on EMF issues. The FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. The FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts with independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radio frequency energy exposure I can get by using my wireless phone? All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit Radio Frequency energy (RF) exposures. The FCC established these guidelines in consultation with the FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the body's ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc. gov/oet/ rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone's RF exposure level in the online listing. 8. What has the FDA done to measure the radio frequency energy coming from wireless phones? The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the Radio Frequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, "Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques," sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9. What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to Radio Frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10. What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to Radio Frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment? Radio Frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, the FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical Instrumentation (AAMI). The final draft, a joint effort by the FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. The FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a "compatible" phone and a "compatible" hearing aid at the same time. This standard was approved by the IEEE in 2000. The FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, the FDA will conduct testing to assess the interference and work to resolve the problem. 12. Where can I find additional information? For additional information, please refer to the following resources: FDA web page on wireless phones (http://www.fda.gov/cdrh/phones/index.html) Federal Communications Commission (FCC) RF Safety Program (http://www.fcc.gov/oet/rfsafety) International Commission on Non-Ionizing Radiation Protection (http://www.icnirp.de) World Health Organization (WHO) International EMF Project (http://www.who.int/emf) National Radiological Protection Board (UK) (http://www.nrpb.org.uk/) 10 Driver Safety Tips Your wireless phone gives you the powerful ability to communicate by voice almost anywhere, anytime. An important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When operating a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips: 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2. When available, use a hands-free device. A number of hands-free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can reach it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voicemail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to-do" list while driving a car, you are not watching where you are going. It is common sense. Don't get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip -- dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix; they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations -- with your phone at your side, help is only three numbers away. Dial 911 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone! 9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special nonemergency wireless number. For more information, please call to 888-901-SAFE, or visit our website www.wow-com.com Consumer Information on SAR (Specific Absorption Rate) This Model Phone Meets the Government's Requirements for Exposure to Radio Waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to Radio Frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Because the phone is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.23 W/kg and when worn on the body, as described in this user guide, is 0.848 W/kg (body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. Shortcut Help The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID BEJAX5000. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wowcom. com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Accessories There are a variety of accessories available for your mobile phone. Consult your local dealer for availability. Power Adapter The power adapter, allows you to charge the battery while away from your home or office. Battery Two batteries are available. The standard battery, and the extended battery. Car Power Adapter The car power adapter allows you to operate the phone and trickle charge the phone's battery from your vehicle. It takes 5 hours to charge a completely discharged battery. Hands-Free Car Kit (Portable) The hands-free car kit enables you to attach the phone to the power jack in your car, providing you with handsfree operation. It can charge a completely discharged battery in 5 hours. Hands-free Headset The hands-free headset connects to your phone allowing hands-free operation. It includes earpiece, microphone. NOTE: It operates in vibration/no sound mode on Manner Mode/ Silence All Mode even when connected to headset. USB Cable Connects your phone to your PC. Serial Cable Connects your phone to your PC. Battery Pack Charger The battery pack charger allows you to charge the battery pack itself without the phone. It can charge a completely discharged standard battery in 3.5 hours. Holster LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for TWELVE (12) MONTHS beginning on the date of purchase of the product with valid proof of purchase, or absent valid proof of purchase, FIFTEEN (15) MONTHS from date of manufacture as determined by the unit's manufacture date code. (2) The limited warranty extends only to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user. (3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S, including Alaska, Hawaii, U.S. Territories and Canada. (4) The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shall not be covered under these limited warranty terms. (5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase. (6) The customer shall bear the cost of shipping the product to the Customer Service Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty. 2. WHAT THIS WARRANTY DOES NOT COVER: (1) Defects or damages resulting from use of the product in other than its normal and customary manner. (2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping, blown fuses, spills of food or liquid. (3) Breakage or damage to antennas unless caused directly by defects in material or workmanship. (4) That the Customer Service Department at LG was not notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period. (5) Products which have had the serial number removed or made illegible. (6) This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any implied warranty of marketability or fitness for a particular use. (7) Damage resulting from use of non-LG approved accessories. (8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use. (9) Products operated outside published maximum ratings. (10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS PRODUCT. Some states do not allow the exclusive of limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 4. HOW TO GET WARRANTY SERVICE: To obtain warranty service, please call or fax to the following telephone numbers from anywhere in the continental United States: Tel. 1-800-793-8896 or Fax. 1-800-448-4026 Or visit www.lgeservice.com. Correspondence may also be mailed to: LG Electronics MobileComm U.S.A., Inc. 201 James Record Road Huntsville, AL 35824 DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS. Please call or write for the location of the LG authorized service center nearest you and for the procedures for obtaining warranty claims.